msc dissertation introduction

• How it works

How to Write the Thesis Or Dissertation Introduction – Guide

Published by Carmen Troy at August 31st, 2021 , Revised On January 24, 2024

Introducing your Dissertation Topic

What would you tell someone if they asked you to introduce yourself? You’d probably start with your name, what you do for a living…etc., etc., etc. Think of your dissertation. How would you go about it if you had to introduce it to the world for the first time?

Keep this forefront in your mind for the remainder of this guide: you are introducing your research to the world that doesn’t even know it exists. Every word, phrase and line you write in your introduction will stand for the strength of your dissertation’s character.

This is not very different from how, in real life, if someone fails to introduce themselves properly (such as leaving out what they do for a living, where they live, etc.) to a stranger, it leaves a lasting impression on the stranger.

Don’t leave your dissertation a stranger among other strangers. Let’s review the little, basic concepts we already have at the back of our minds, perhaps, to piece them together in one body: an introduction.

What Goes Inside an Introduction

The exact ingredients of a dissertation or thesis introduction chapter vary depending on  your chosen research topic, your university’s guidelines, and your academic subject – but they are generally mixed in one sequence or another to introduce an academic argument.

The critical elements of an excellent dissertation introduction include a definition of the selected research topic , a reference to previous studies on the subject, a statement of the value of the subject for academic and scientific communities, a clear aim/purpose of the study, a list of your objectives, a reference to viewpoints of other researchers and a justification for the research.

Topic Discussion versus Topic Introduction

Discussing and introducing a topic are two highly different aspects of dissertation introduction writing. You might find it easy to discuss a topic, but introducing it is much trickier.

The introduction is the first thing a reader reads; thus, it must be to the point, informative, engaging, and enjoyable. Even if one of these elements is missing, the reader will not be motivated to continue reading the paper and will move on to something different.

So, it’s critical to fully understand how to write the introduction of a dissertation before starting the actual write-up.

When writing a dissertation introduction, one has to explain the title, discuss the topic and present a background so that readers understand what your research is about and what  results you expect to achieve at the end of the research work.

As a standard practice, you might work on your dissertation introduction chapter several times. Once when you’re working on your proposal and the second time when writing your actual dissertation.

“ Want to keep up with the progress of the work done by your writer? ResearchProspect can deliver your dissertation order in three parts; outline, first half, and final dissertation delivery. Here is the link to our online order form .

Many academics argue that the Introduction chapter should be the last section of the dissertation paper you should complete, but by no means is it the last part you would think of because this is where your research starts from.

Write the draft introduction as early as possible. You should write it at the same time as the proposal submission, although you must revise and edit it many times before it takes the final shape.

Considering its importance, many students remain unsure of how to write the introduction of a dissertation. Here are some of the essential elements of how to write the introduction of a dissertation that’ll provide much-needed dissertation introduction writing help.

Below are some guidelines for you to learn to  write a flawless first-class dissertation paper.

Steps of Writing a Dissertation Introduction

1. research background – writing a dissertation introduction.

This is the very first section of your introduction. Building a background of your chosen topic will help you understand more about the topic and help readers know why the general research area is problematic, interesting, central, important, etc.

Your research background should include significant concepts related to your dissertation topic. This will give your supervisor and markers an idea that you’ve investigated the research problem thoroughly and know the various aspects of your topic.

The introduction to a dissertation shouldn’t talk only about other research work in the same area, as this will be discussed in the literature review section. Moreover, this section should not include the research design  and  data collection method(s) .

All about  research strategy  should be covered in the  methodology chapter . Research background only helps to build up your research in general.

For instance, if your research is based on job satisfaction measures of a specific country, the content of the introduction chapter will generally be about job satisfaction and its impact.

Hire an Expert Writer

Orders completed by our expert writers are

• Formally drafted in academic style
• Plagiarism free
• Never resold
• Include unlimited free revisions
• Completed to match exact client requirements

2.     Significance of the Research

As a researcher, you must demonstrate how your research will provide value to the scientific and academic communities. If your dissertation is based on a specific company or industry, you need to explain why that industry and company were chosen.

If you’re comparing, explain why you’re doing so and what this research will yield. Regardless of your chosen research topic, explain thoroughly in this section why this research is being conducted and what benefits it will serve.

The idea here is to convince your supervisor and readers that the concept should be researched to find a solution to a problem.

3.     Research Problem

Once you’ve described the main research problem  and the importance of your research, the next step would be to present your  problem statement , i.e., why this research is being conducted and its purpose.

This is one of the essential aspects of writing a dissertation’s introduction. Doing so will help your readers understand what you intend to do in this research and what they should expect from this study.

Presenting the research problem competently is crucial in persuading your readers to read other parts of the dissertation paper . This research problem is the crux of your dissertation, i.e., it gives a direction as to why this research is being carried out, and what issues the study will consider.

For example, if your dissertation is based on measuring the job satisfaction of a specific organisation, your research problem should talk about the problem the company is facing and how your research will help the company to solve that.

If your dissertation is not based on any specific organisation, you can explain the common issues that companies face when they do not consider job satisfaction as a pillar of business growth and elaborate on how your research will help them realise its importance.

Citing too many references in the introduction chapter isn’t recommended because here, you must explain why you chose to study a specific area and what your research will accomplish. Any citations only set the context, and you should leave the bulk of the literature for a later section.

4.     Research Question(s)

The central part of your introduction is the research question , which should be based on your research problem and the dissertation title. Combining these two aspects will help you formulate an exciting yet manageable research question.

Your research question is what your research aims to answer and around which your dissertation will revolve. The research question should be specific and concise.

It should be a one- or two-line question you’ve set out to answer through your dissertation. For the job satisfaction example, a sample research question could be, how does job satisfaction positively impact employee performance?

Look up dissertation introduction examples online or ask your friends to get an idea of how an ideal research question is formed. Or you can review our dissertation introduction example here  and  research question examples here .

Once you’ve formed your research question, pick out vital elements from it, based on which you will then prepare your theoretical framework  and literature review. You will come back to your research question again when  concluding your dissertation .

Sometimes, you might have to formulate a hypothesis in place of a research question. The hypothesis is a simple statement you prove with your  results ,  discussion and analysis .

A sample hypothesis could be job satisfaction is positively linked to employee job performance . The results of your dissertation could be in favour of this dissertation or against it.

Tip: Read up about what alternative, null, one-tailed and two-tailed hypotheses are so you can better formulate the hypothesis for your dissertation. Following are the definitions for each term, as retrieved from Trochim et al.’s Research Methods: The Essential Knowledge Base (2016):

• Alternative hypothesis (H 1 ): “A specific statement of prediction that usually states what you expect will happen in your study.”
• Null hypothesis (H 0 ): “The hypothesis that describes the possible outcomes other than the alternative hypothesis. Usually, the null hypothesis predicts there will be no effect of a program or treatment you are studying.”
• One-tailed hypothesis: “A hypothesis that specifies a direction; for example, when your hypothesis predicts that your program will increase the outcome.”
• Two-tailed hypothesis: “A hypothesis that does not specify a direction. For example, if you hypothesise that your program or intervention will affect an outcome, but you are unwilling to specify whether that effect will be positive or negative, you are using a two-tailed hypothesis.”

Get Help with Any Part of Your Dissertation!

UK’s best academic support services. How would you know until you try?

Interesting read: 10 ways to write a practical introduction fast .

Get Help With Any Part of Your Dissertation!

Uk’s best academic support services. how would you know until you try, 5.     research aims and objectives.

Next, the research aims and objectives. Aims and objectives are broad statements of desired results of your dissertation . They reflect the expectations of the topic and research and address the long-term project outcomes.

These statements should use the concepts accurately, must be focused, should be able to convey your research intentions and serve as steps that communicate how your  research question  will be answered.

You should formulate your aims and objectives based on your topic, research question, or hypothesis. These are simple statements and are an extension of your research question.

Through the aims and objectives, you communicate to your readers what aspects of research you’ve considered and how you intend to answer your research question.

Usually, these statements initiate with words like ‘to explore’, ‘to study’, ‘to assess’, ‘to critically assess’, ‘to understand’, ‘to evaluate’ etc.

You could ask your supervisor to provide some thesis introduction examples to help you understand better how aims and objectives are formulated. More examples are here .

Your aims and objectives should be interrelated and connect to your research question and problem. If they do not, they’ll be considered vague and too broad in scope.

Always ensure your research aims and objectives are concise, brief, and relevant.

Once you conclude  your dissertation , you will have to revert back to address whether your research aims and objectives have been met.

You will have to reflect on how your dissertation’s findings , analysis, and discussion related to your aims and objectives and how your research has helped in achieving them.

6.     Research Limitations

This section is sometimes a part of the  dissertation methodology section ; however, it is usually included in the introduction of a dissertation.

Every research has some limitations. Thus, it is normal for you to experience certain limitations when conducting your study.

You could experience  research design limitations, data limitations or even financial limitations. Regardless of which type of limitation you may experience, your dissertation would be impacted. Thus, it would be best if you mentioned them without any hesitation.

When including this section in the introduction, make sure that you clearly state the type of constraint you experienced. This will help your supervisor understand what problems you went through while working on your dissertation.

However, one aspect that you should take care of is that your results, in no way, should be influenced by these restrictions. The results should not be compromised, or your dissertation will not be deemed authentic and reliable.

After you’ve mentioned your research limitations, discuss how you overcame them to produce a perfect dissertation .

Also, mention that your limitations do not adversely impact your results and that you’ve produced research with accurate results the academic community can rely on.

Also read:   How to Write Dissertation Methodology .

7.     Outline of the Dissertation

Even though this isn’t a mandatory sub-section of the introduction chapter, good introductory chapters in dissertations outline what’s to follow in the preceding chapters.

It is also usual to set out an  outline of the rest of the dissertation . Depending on your university and academic subject, you might also be asked to include it in your research proposal .

Because your tutor might want to glance over it to see how you  plan your dissertation and what sections you’d include; based on what sections you include and how you intend to research and cover them, they’d provide feedback for you to improve.

Usually, this section discusses what sections you plan to include and what concepts and aspects each section entails. A standard dissertation consists of five sections : chapters, introduction,  literature review ,  methodology ,  results  and  discussion , and  conclusion .

Some  dissertation assignments do not use the same chapter for results and discussion. Instead, they split it into two different chapters, making six chapters. Check with your supervisor regarding which format you should follow.

When discussing the  outline of your dissertation , remember that you’d have to mention what each section involves. Discuss all the significant aspects of each section to give a brief overview of what your dissertation contains, and this is precisely what our dissertation outline service  provides.

Writing a dissertation introduction might seem complicated, but it is not if you understand what is expected of you. To understand the required elements and make sure that you focus on all of them.

Include all the aspects to ensure your supervisor and other readers can easily understand how you intend to undertake your research.

“If you find yourself stuck at any stage of your dissertation introduction, get introduction writing help from our writers! At ResearchProspect, we offer a dissertation writing service , and our qualified team of writers will also assist you in conducting in-depth research for your dissertation.

Dissertation Introduction Samples & Examples

Check out some basic samples of dissertation introduction chapters to get started.

FAQs about Dissertation Introduction

What is the purpose of an introduction chapter.

It’s used to introduce key constructs, ideas, models and/or theories etc. relating to the topic; things that you will be basing the remainder of your dissertation on.

How do you start an introduction in a dissertation?

There is more than one way of starting a dissertation’s introductory chapter. You can begin by stating a problem in your area of interest, review relevant literature, identify the gap, and introduce your topic. Or, you can go the opposite way, too. It’s all entirely up to your discretion. However, be consistent in the format you choose to write in.

How long can an introduction get?

It can range from 1000 to 2000 words for a master’s dissertation , but for a higher-level dissertation, it mostly ranges from 8,000 to 10,000 words ’ introduction chapter. In the end, though, it depends on the guidelines provided to you by your department.

Steps to Writing a Dissertation Introduction

You may also like.

Dissertation conclusion is perhaps the most underrated part of a dissertation or thesis paper. Learn how to write a dissertation conclusion.

Have you failed dissertation, assignment, exam or coursework? Don’t panic because you are not alone. Get help from our professional UK qualified writers!

This brief introductory section aims to deal with the definitions of two paradigms, positivism and post-positivism, as well as their importance in research.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• Home »

find your perfect postgrad program Search our Database of 30,000 Courses

How to write a masters dissertation or thesis: top tips.

It is completely normal to find the idea of writing a masters thesis or dissertation slightly daunting, even for students who have written one before at undergraduate level. Though, don’t feel put off by the idea. You’ll have plenty of time to complete it, and plenty of support from your supervisor and peers.

One of the main challenges that students face is putting their ideas and findings into words. Writing is a skill in itself, but with the right advice, you’ll find it much easier to get into the flow of writing your masters thesis or dissertation.

We’ve put together a step-by-step guide on how to write a dissertation or thesis for your masters degree, with top tips to consider at each stage in the process.

1. Understand your dissertation (or thesis) topic

There are slight differences between theses and dissertations , although both require a high standard of writing skill and knowledge in your topic. They are also formatted very similarly.

At first, writing a masters thesis can feel like running a 100m race – the course feels very quick and like there is not as much time for thinking! However, you’ll usually have a summer semester dedicated to completing your dissertation – giving plenty of time and space to write a strong academic piece.

By comparison, writing a PhD thesis can feel like running a marathon, working on the same topic for 3-4 years can be laborious. But in many ways, the approach to both of these tasks is quite similar.

Before writing your masters dissertation, get to know your research topic inside out. Not only will understanding your topic help you conduct better research, it will also help you write better dissertation content.

Also consider the main purpose of your dissertation. You are writing to put forward a theory or unique research angle – so make your purpose clear in your writing.

Top writing tip: when researching your topic, look out for specific terms and writing patterns used by other academics. It is likely that there will be a lot of jargon and important themes across research papers in your chosen dissertation topic. 

2. Structure your dissertation or thesis

Writing a thesis is a unique experience and there is no general consensus on what the best way to structure it is. 

As a postgraduate student , you’ll probably decide what kind of structure suits your research project best after consultation with your supervisor. You’ll also have a chance to look at previous masters students’ theses in your university library.

To some extent, all postgraduate dissertations are unique. Though they almost always consist of chapters. The number of chapters you cover will vary depending on the research. 

A masters dissertation or thesis organised into chapters would typically look like this: 

Write down your structure and use these as headings that you’ll write for later on.

Top writing tip : ease each chapter together with a paragraph that links the end of a chapter to the start of a new chapter. For example, you could say something along the lines of “in the next section, these findings are evaluated in more detail”. This makes it easier for the reader to understand each chapter and helps your writing flow better.

3. Write up your literature review

One of the best places to start when writing your masters dissertation is with the literature review. This involves researching and evaluating existing academic literature in order to identify any gaps for your own research.

Many students prefer to write the literature review chapter first, as this is where several of the underpinning theories and concepts exist. This section helps set the stage for the rest of your dissertation, and will help inform the writing of your other dissertation chapters.

What to include in your literature review

The literature review chapter is more than just a summary of existing research, it is an evaluation of how this research has informed your own unique research.

Demonstrate how the different pieces of research fit together. Are there overlapping theories? Are there disagreements between researchers?

Highlight the gap in the research. This is key, as a dissertation is mostly about developing your own unique research. Is there an unexplored avenue of research? Has existing research failed to disprove a particular theory?

Back up your methodology. Demonstrate why your methodology is appropriate by discussing where it has been used successfully in other research.

4. Write up your research

Your research is the heart and soul of your dissertation. Conducting your actual research is a whole other topic in itself, but it’s important to consider that your research design will heavily influence the way you write your final dissertation.

For instance, a more theoretical-based research topic might encompass more writing from a philosophical perspective. Qualitative data might require a lot more evaluation and discussion than quantitative research. 

Methodology chapter

The methodology chapter is all about how you carried out your research and which specific techniques you used to gather data. You should write about broader methodological approaches (e.g. qualitative, quantitative and mixed methods), and then go into more detail about your chosen data collection strategy. 

Data collection strategies include things like interviews, questionnaires, surveys, content analyses, discourse analyses and many more.

Data analysis and findings chapters

The data analysis or findings chapter should cover what you actually discovered during your research project. It should be detailed, specific and objective (don’t worry, you’ll have time for evaluation later on in your dissertation)

Write up your findings in a way that is easy to understand. For example, if you have a lot of numerical data, this could be easier to digest in tables.

This will make it easier for you to dive into some deeper analysis in later chapters. Remember, the reader will refer back to your data analysis section to cross-reference your later evaluations against your actual findings – so presenting your data in a simple manner is beneficial.

Think about how you can segment your data into categories. For instance, it can be useful to segment interview transcripts by interviewee. 

Top writing tip : write up notes on how you might phrase a certain part of the research. This will help bring the best out of your writing. There is nothing worse than when you think of the perfect way to phrase something and then you completely forget it.

5. Discuss and evaluate

Once you’ve presented your findings, it’s time to evaluate and discuss them.

It might feel difficult to differentiate between your findings and discussion sections, because you are essentially talking about the same data. The easiest way to remember the difference is that your findings simply present the data, whereas your discussion tells the story of this data.

Your evaluation breaks the story down, explaining the key findings, what went well and what didn’t go so well.

In your discussion chapter, you’ll have chance to expand on the results from your findings section. For example, explain what certain numbers mean and draw relationships between different pieces of data.

Top writing tip: don’t be afraid to point out the shortcomings of your research. You will receive higher marks for writing objectively. For example, if you didn’t receive as many interview responses as expected, evaluate how this has impacted your research and findings. Don’t let your ego get in the way!

6. Write your introduction

Your introduction sets the scene for the rest of your masters dissertation. You might be wondering why writing an introduction isn't at the start of our step-by-step list, and that’s because many students write this chapter last.

Here’s what your introduction chapter should cover:

Problem statement

Research question

Significance of your research

This tells the reader what you’ll be researching as well as its importance. You’ll have a good idea of what to include here from your original dissertation proposal , though it’s fairly common for research to change once it gets started.

Writing or at least revisiting this section last can be really helpful, since you’ll have a more well-rounded view of what your research actually covers once it has been completed and written up.

Masters dissertation writing tips

When to start writing your thesis or dissertation.

When you should start writing your masters thesis or dissertation depends on the scope of the research project and the duration of your course. In some cases, your research project may be relatively short and you may not be able to write much of your thesis before completing the project. 

But regardless of the nature of your research project and of the scope of your course, you should start writing your thesis or at least some of its sections as early as possible, and there are a number of good reasons for this:

Academic writing is about practice, not talent. The first steps of writing your dissertation will help you get into the swing of your project. Write early to help you prepare in good time.

Write things as you do them. This is a good way to keep your dissertation full of fresh ideas and ensure that you don’t forget valuable information.

The first draft is never perfect. Give yourself time to edit and improve your dissertation. It’s likely that you’ll need to make at least one or two more drafts before your final submission.

Writing early on will help you stay motivated when writing all subsequent drafts.

Thinking and writing are very connected. As you write, new ideas and concepts will come to mind. So writing early on is a great way to generate new ideas.

How to improve your writing skills

The best way of improving your dissertation or thesis writing skills is to:

 Finish the first draft of your masters thesis as early as possible and send it to your supervisor for revision. Your supervisor will correct your draft and point out any writing errors. This process will be repeated a few times which will help you recognise and correct writing mistakes yourself as time progresses.

If you are not a native English speaker, it may be useful to ask your English friends to read a part of your thesis and warn you about any recurring writing mistakes. Read our section on English language support for more advice. 

Most universities have writing centres that offer writing courses and other kinds of support for postgraduate students. Attending these courses may help you improve your writing and meet other postgraduate students with whom you will be able to discuss what constitutes a well-written thesis.

Read academic articles and search for writing resources on the internet. This will help you adopt an academic writing style, which will eventually become effortless with practice.

Keep track of your bibliography 

When studying for your masters dissertation, you will need to develop an efficient way of organising your bibliography – this will prevent you from getting lost in large piles of data that you’ll need to write your dissertation. 

The easiest way to keep the track of all the articles you have read for your research is to create a database where you can summarise each article/chapter into a few most important bullet points to help you remember their content. 

Another useful tool for doing this effectively is to learn how to use specific reference management software (RMS) such as EndNote. RMS is relatively simple to use and saves a lot of time when it comes to organising your bibliography. This may come in very handy, especially if your reference section is suspiciously missing two hours before you need to submit your dissertation! 

Avoid accidental plagiarism

Plagiarism may cost you your postgraduate degree and it is important that you consciously avoid it when writing your thesis or dissertation. 

Occasionally, postgraduate students commit plagiarism unintentionally. This can happen when sections are copy and pasted from journal articles they are citing instead of simply rephrasing them. Whenever you are presenting information from another academic source, make sure you reference the source and avoid writing the statement exactly as it is written in the original paper.

What kind of format should your thesis have?

Read your university’s guidelines before you actually start writing your thesis so you don’t have to waste time changing the format further down the line. However in general, most universities will require you to use 1.5-2 line spacing, font size 12 for text, and to print your thesis on A4 paper. These formatting guidelines may not necessarily result in the most aesthetically appealing thesis, however beauty is not always practical, and a nice looking thesis can be a more tiring reading experience for your postgrad examiner .

When should I submit my thesis?

The length of time it takes to complete your MSc or MA thesis will vary from student to student. This is because people work at different speeds, projects vary in difficulty, and some projects encounter more problems than others. 

Obviously, you should submit your MSc thesis or MA thesis when it is finished! Every university will say in its regulations that it is the student who must decide when it is ready to submit. 

However, your supervisor will advise you whether your work is ready and you should take their advice on this. If your supervisor says that your work is not ready, then it is probably unwise to submit it. Usually your supervisor will read your final thesis or dissertation draft and will let you know what’s required before submitting your final draft.

Set yourself a target for completion. This will help you stay on track and avoid falling behind. You may also only have funding for the year, so it is important to ensure you submit your dissertation before the deadline – and also ensure you don’t miss out on your graduation ceremony ! 

To set your target date, work backwards from the final completion and submission date, and aim to have your final draft completed at least three months before that final date.

Don’t leave your submission until the last minute – submit your work in good time before the final deadline. Consider what else you’ll have going on around that time. Are you moving back home? Do you have a holiday? Do you have other plans?

If you need to have finished by the end of June to be able to go to a graduation ceremony in July, then you should leave a suitable amount of time for this. You can build this into your dissertation project planning at the start of your research.

It is important to remember that handing in your thesis or dissertation is not the end of your masters program . There will be a period of time of one to three months between the time you submit and your final day. Some courses may even require a viva to discuss your research project, though this is more common at PhD level . 

If you have passed, you will need to make arrangements for the thesis to be properly bound and resubmitted, which will take a week or two. You may also have minor corrections to make to the work, which could take up to a month or so. This means that you need to allow a period of at least three months between submitting your thesis and the time when your program will be completely finished. Of course, it is also possible you may be asked after the viva to do more work on your thesis and resubmit it before the examiners will agree to award the degree – so there may be an even longer time period before you have finished.

How do I submit the MA or MSc dissertation?

Most universities will have a clear procedure for submitting a masters dissertation. Some universities require your ‘intention to submit’. This notifies them that you are ready to submit and allows the university to appoint an external examiner.

This normally has to be completed at least three months before the date on which you think you will be ready to submit.

When your MA or MSc dissertation is ready, you will have to print several copies and have them bound. The number of copies varies between universities, but the university usually requires three – one for each of the examiners and one for your supervisor.

However, you will need one more copy – for yourself! These copies must be softbound, not hardbound. The theses you see on the library shelves will be bound in an impressive hardback cover, but you can only get your work bound like this once you have passed. 

You should submit your dissertation or thesis for examination in soft paper or card covers, and your university will give you detailed guidance on how it should be bound. They will also recommend places where you can get the work done.

The next stage is to hand in your work, in the way and to the place that is indicated in your university’s regulations. All you can do then is sit and wait for the examination – but submitting your thesis is often a time of great relief and celebration!

Some universities only require a digital submission, where you upload your dissertation as a file through their online submission system.

Related articles

What Is The Difference Between A Dissertation & A Thesis

How To Get The Most Out Of Your Writing At Postgraduate Level

Dos & Don'ts Of Academic Writing

Dispelling Dissertation Drama

Dissertation Proposal

Essay Tips For Out of Practice Postgrads

Choosing A Unique Dissertation Topic

How To Edit Your Own Postgraduate Writing

Basic Essay Writing Skills For Postgrads

Postgrad Solutions Study Bursaries

Exclusive bursaries Open day alerts Funding advice Application tips Latest PG news

Sign up now!

Take 2 minutes to sign up to PGS student services and reap the benefits…

• The chance to apply for one of our 5 PGS Bursaries worth £2,000 each
• Fantastic scholarship updates
• Latest PG news sent directly to you.

How to write a fantastic thesis introduction (+15 examples)

The thesis introduction, usually chapter 1, is one of the most important chapters of a thesis. It sets the scene. It previews key arguments and findings. And it helps the reader to understand the structure of the thesis. In short, a lot is riding on this first chapter. With the following tips, you can write a powerful thesis introduction.

Disclosure: This post may contain affiliate links, which means I may earn a small commission if you make a purchase using the links below at no additional cost to you . I only recommend products or services that I truly believe can benefit my audience. As always, my opinions are my own.

Elements of a fantastic thesis introduction

Open with a (personal) story, begin with a problem, define a clear research gap, describe the scientific relevance of the thesis, describe the societal relevance of the thesis, write down the thesis’ core claim in 1-2 sentences, support your argument with sufficient evidence, consider possible objections, address the empirical research context, give a taste of the thesis’ empirical analysis, hint at the practical implications of the research, provide a reading guide, briefly summarise all chapters to come, design a figure illustrating the thesis structure.

An introductory chapter plays an integral part in every thesis. The first chapter has to include quite a lot of information to contextualise the research. At the same time, a good thesis introduction is not too long, but clear and to the point.

A powerful thesis introduction does the following:

• It captures the reader’s attention.
• It presents a clear research gap and emphasises the thesis’ relevance.
• It provides a compelling argument.
• It previews the research findings.
• It explains the structure of the thesis.

In addition, a powerful thesis introduction is well-written, logically structured, and free of grammar and spelling errors. Reputable thesis editors can elevate the quality of your introduction to the next level. If you are in search of a trustworthy thesis or dissertation editor who upholds high-quality standards and offers efficient turnaround times, I recommend the professional thesis and dissertation editing service provided by Editage . 

This list can feel quite overwhelming. However, with some easy tips and tricks, you can accomplish all these goals in your thesis introduction. (And if you struggle with finding the right wording, have a look at academic key phrases for introductions .)

Ways to capture the reader’s attention

A powerful thesis introduction should spark the reader’s interest on the first pages. A reader should be enticed to continue reading! There are three common ways to capture the reader’s attention.

An established way to capture the reader’s attention in a thesis introduction is by starting with a story. Regardless of how abstract and ‘scientific’ the actual thesis content is, it can be useful to ease the reader into the topic with a short story.

This story can be, for instance, based on one of your study participants. It can also be a very personal account of one of your own experiences, which drew you to study the thesis topic in the first place.

Start by providing data or statistics

Data and statistics are another established way to immediately draw in your reader. Especially surprising or shocking numbers can highlight the importance of a thesis topic in the first few sentences!

So if your thesis topic lends itself to being kick-started with data or statistics, you are in for a quick and easy way to write a memorable thesis introduction.

The third established way to capture the reader’s attention is by starting with the problem that underlies your thesis. It is advisable to keep the problem simple. A few sentences at the start of the chapter should suffice.

Usually, at a later stage in the introductory chapter, it is common to go more in-depth, describing the research problem (and its scientific and societal relevance) in more detail.

You may also like: Minimalist writing for a better thesis

Emphasising the thesis’ relevance

A good thesis is a relevant thesis. No one wants to read about a concept that has already been explored hundreds of times, or that no one cares about.

Of course, a thesis heavily relies on the work of other scholars. However, each thesis is – and should be – unique. If you want to write a fantastic thesis introduction, your job is to point out this uniqueness!

In academic research, a research gap signifies a research area or research question that has not been explored yet, that has been insufficiently explored, or whose insights and findings are outdated.

Every thesis needs a crystal-clear research gap. Spell it out instead of letting your reader figure out why your thesis is relevant.

* This example has been taken from an actual academic paper on toxic behaviour in online games: Liu, J. and Agur, C. (2022). “After All, They Don’t Know Me” Exploring the Psychological Mechanisms of Toxic Behavior in Online Games. Games and Culture 1–24, DOI: 10.1177/15554120221115397

The scientific relevance of a thesis highlights the importance of your work in terms of advancing theoretical insights on a topic. You can think of this part as your contribution to the (international) academic literature.

Scientific relevance comes in different forms. For instance, you can critically assess a prominent theory explaining a specific phenomenon. Maybe something is missing? Or you can develop a novel framework that combines different frameworks used by other scholars. Or you can draw attention to the context-specific nature of a phenomenon that is discussed in the international literature.

The societal relevance of a thesis highlights the importance of your research in more practical terms. You can think of this part as your contribution beyond theoretical insights and academic publications.

Why are your insights useful? Who can benefit from your insights? How can your insights improve existing practices?

Formulating a compelling argument

Arguments are sets of reasons supporting an idea, which – in academia – often integrate theoretical and empirical insights. Think of an argument as an umbrella statement, or core claim. It should be no longer than one or two sentences.

Including an argument in the introduction of your thesis may seem counterintuitive. After all, the reader will be introduced to your core claim before reading all the chapters of your thesis that led you to this claim in the first place.

But rest assured: A clear argument at the start of your thesis introduction is a sign of a good thesis. It works like a movie teaser to generate interest. And it helps the reader to follow your subsequent line of argumentation.

The core claim of your thesis should be accompanied by sufficient evidence. This does not mean that you have to write 10 pages about your results at this point.

However, you do need to show the reader that your claim is credible and legitimate because of the work you have done.

A good argument already anticipates possible objections. Not everyone will agree with your core claim. Therefore, it is smart to think ahead. What criticism can you expect?

Think about reasons or opposing positions that people can come up with to disagree with your claim. Then, try to address them head-on.

Providing a captivating preview of findings

Similar to presenting a compelling argument, a fantastic thesis introduction also previews some of the findings. When reading an introduction, the reader wants to learn a bit more about the research context. Furthermore, a reader should get a taste of the type of analysis that will be conducted. And lastly, a hint at the practical implications of the findings encourages the reader to read until the end.

If you focus on a specific empirical context, make sure to provide some information about it. The empirical context could be, for instance, a country, an island, a school or city. Make sure the reader understands why you chose this context for your research, and why it fits to your research objective.

If you did all your research in a lab, this section is obviously irrelevant. However, in that case you should explain the setup of your experiment, etcetera.

The empirical part of your thesis centers around the collection and analysis of information. What information, and what evidence, did you generate? And what are some of the key findings?

For instance, you can provide a short summary of the different research methods that you used to collect data. Followed by a short overview of how you analysed this data, and some of the key findings. The reader needs to understand why your empirical analysis is worth reading.

You already highlighted the practical relevance of your thesis in the introductory chapter. However, you should also provide a preview of some of the practical implications that you will develop in your thesis based on your findings.

Presenting a crystal clear thesis structure

A fantastic thesis introduction helps the reader to understand the structure and logic of your whole thesis. This is probably the easiest part to write in a thesis introduction. However, this part can be best written at the very end, once everything else is ready.

A reading guide is an essential part in a thesis introduction! Usually, the reading guide can be found toward the end of the introductory chapter.

The reading guide basically tells the reader what to expect in the chapters to come.

In a longer thesis, such as a PhD thesis, it can be smart to provide a summary of each chapter to come. Think of a paragraph for each chapter, almost in the form of an abstract.

For shorter theses, which also have a shorter introduction, this step is not necessary.

Especially for longer theses, it tends to be a good idea to design a simple figure that illustrates the structure of your thesis. It helps the reader to better grasp the logic of your thesis.

Master Academia

Get new content delivered directly to your inbox.

Subscribe and receive Master Academia's quarterly newsletter.

The most useful academic social networking sites for PhD students

10 reasons not to do a master's degree, related articles.

Dealing with conflicting feedback from different supervisors

How to deal with procrastination productively during thesis writing

The importance of sleep for efficient thesis writing

Theoretical vs. conceptual frameworks: Simple definitions and an overview of key differences

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.  

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

• Clearly understand what a dissertation (or thesis) is
• Find a unique and valuable research topic
• Craft a convincing research proposal
• Write up a strong introduction chapter
• Review the existing literature and compile a literature review
• Design a rigorous research strategy and undertake your own research
• Present the findings of your research
• Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

• Ask a very specific, well-articulated question (s) (your research topic)
• See what other researchers have said about it (if they’ve already answered it)
• If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
• Answer your original question(s), based on your analysis findings

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

• Started with a vague, poorly articulated question
• Not taken the time to see what research has already been done regarding the question
• Collected data and opinions that support their gut and undertaken a flimsy analysis
• Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2:   Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

• You have a clearly articulated, unique and important topic (this might sound familiar…)
• You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
• You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

• A brief background to the study, explaining the overall area of research
• A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
• Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
• The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

• You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
• You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
• You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

• Your research philosophy (e.g. positivism or interpretivism )
• Your overall methodology (e.g. qualitative , quantitative or mixed methods)
• Your data collection strategy (e.g. interviews , focus groups, surveys)
• Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

• If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
• If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

• If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
• If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
• If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling  – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

• Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
• Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

• Understand what a dissertation (or thesis) is – a research project that follows the research process.
• Find a unique (original) and important research topic
• Craft a convincing dissertation or thesis research proposal
• Write a clear, compelling introduction chapter
• Undertake a thorough review of the existing research and write up a literature review
• Undertake your own research
• Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.  

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

You Might Also Like:

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Jump to menu
• Student Home
• Accept your offer
• How to enrol
• Student ID card
• Set up your IT
• Orientation Week
• Fees & payment
• Academic calendar
• Special consideration
• Transcripts
• The Nucleus: Student Hub
• Referencing
• Essay writing
• Learning abroad & exchange
• Professional development & UNSW Advantage
• Employability
• Financial assistance
• International students
• Equitable learning
• Postgraduate research
• Health Service
• Events & activities
• Emergencies
• Volunteering
• Clubs and societies
• Accommodation
• Health services
• Sport and gym
• Arc student organisation
• Security on campus
• Maps of campus
• Careers portal
• Change password

How to Write a Thesis Introduction

What types of information should you include in your introduction .

In the introduction of your thesis, you’ll be trying to do three main things, which are called Moves :

• Move 1 establish your territory (say what the topic is about)
• Move 2 establish a niche (show why there needs to be further research on your topic)
• Move 3 introduce the current research (make hypotheses; state the research questions)

Each Move has a number of stages. Depending on what you need to say in your introduction, you might use one or more stages. Table 1 provides you with a list of the most commonly occurring stages of introductions in Honours theses (colour-coded to show the Moves ). You will also find examples of Introductions, divided into stages with sample sentence extracts. Once you’ve looked at Examples 1 and 2, try the exercise that follows.

Most thesis introductions include SOME (but not all) of the stages listed below. There are variations between different Schools and between different theses, depending on the purpose of the thesis.

Stages in a thesis introduction

• state the general topic and give some background
• provide a review of the literature related to the topic
• define the terms and scope of the topic
• outline the current situation
• evaluate the current situation (advantages/ disadvantages) and identify the gap
• identify the importance of the proposed research
• state the research problem/ questions
• state the research aims and/or research objectives
• state the hypotheses
• outline the order of information in the thesis
• outline the methodology

Example 1: Evaluation of Boron Solid Source Diffusion for High-Efficiency Silicon Solar Cells (School of Photovoltaic and Renewable Energy Engineering)

Example 2: Methods for Measuring Hepatitis C Viral Complexity (School of Biotechnology and Biological Sciences)

Note: this introduction includes the literature review.

Now that you have read example 1 and 2, what are the differences?

Example 3: The IMO Severe-Weather Criterion Applied to High-Speed Monohulls (School of Mechanical and Manufacturing Engineering)

Example 4: The Steiner Tree Problem (School of Computer Science and Engineering)

Introduction exercise

Example 5.1 (extract 1): The effects of Fluoride on the reproduction of three native Australian plant Species (School of Geography)

Example 5.2 (extract 2): The effects of Fluoride on the reproduction of three native Australian plant Species (School of Geography)

Example 5.3

Example 5.4 (extract 4): The effects of Fluoride on the reproduction of three native Australian plant Species (School of Geography)

Example 5.5 (extract 5): The effects of Fluoride on the reproduction of three native Australian plant Species (School of Geography)

Example 5.6 (extract 6): The effects of Fluoride on the reproduction of three native Australian plant Species (School of Geography)

Well, firstly, there are many choices that you can make. You will notice that there are variations not only between the different Schools in your faculty, but also between individual theses, depending on the type of information that is being communicated. However, there are a few elements that a good Introduction should include, at the very minimum:

• Either Statement of general topic Or Background information about the topic;
• Either Identification of disadvantages of current situation Or Identification of the gap in current research;
• Identification of importance of proposed research
• Either Statement of aims Or Statement of objectives
• An Outline of the order of information in the thesis

Engineering & science

• Report writing
• Technical writing
• Writing lab reports
• Introductions
• Literature review
• Writing up results
• Discussions
• Conclusions
• Writing tools
• Case study report in (engineering)
• ^ More support

Hexamester 3: Library 101 Webinar 8 May 2024

Scholarly Resources 4 Students | scite.ai 21 May 2024

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation

How to Write a Dissertation Proposal | A Step-by-Step Guide

Published on 14 February 2020 by Jack Caulfield . Revised on 11 November 2022.

A dissertation proposal describes the research you want to do: what it’s about, how you’ll conduct it, and why it’s worthwhile. You will probably have to write a proposal before starting your dissertation as an undergraduate or postgraduate student.

A dissertation proposal should generally include:

• An introduction to your topic and aims
• A literature review  of the current state of knowledge
• An outline of your proposed methodology
• A discussion of the possible implications of the research
• A bibliography  of relevant sources

Dissertation proposals vary a lot in terms of length and structure, so make sure to follow any guidelines given to you by your institution, and check with your supervisor when you’re unsure.

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Step 1: coming up with an idea, step 2: presenting your idea in the introduction, step 3: exploring related research in the literature review, step 4: describing your methodology, step 5: outlining the potential implications of your research, step 6: creating a reference list or bibliography.

Before writing your proposal, it’s important to come up with a strong idea for your dissertation.

Find an area of your field that interests you and do some preliminary reading in that area. What are the key concerns of other researchers? What do they suggest as areas for further research, and what strikes you personally as an interesting gap in the field?

Once you have an idea, consider how to narrow it down and the best way to frame it. Don’t be too ambitious or too vague – a dissertation topic needs to be specific enough to be feasible. Move from a broad field of interest to a specific niche:

• Russian literature 19th century Russian literature The novels of Tolstoy and Dostoevsky
• Social media Mental health effects of social media Influence of social media on young adults suffering from anxiety

Prevent plagiarism, run a free check.

Like most academic texts, a dissertation proposal begins with an introduction . This is where you introduce the topic of your research, provide some background, and most importantly, present your aim , objectives and research question(s) .

Try to dive straight into your chosen topic: What’s at stake in your research? Why is it interesting? Don’t spend too long on generalisations or grand statements:

• Social media is the most important technological trend of the 21st century. It has changed the world and influences our lives every day.
• Psychologists generally agree that the ubiquity of social media in the lives of young adults today has a profound impact on their mental health. However, the exact nature of this impact needs further investigation.

Once your area of research is clear, you can present more background and context. What does the reader need to know to understand your proposed questions? What’s the current state of research on this topic, and what will your dissertation contribute to the field?

If you’re including a literature review, you don’t need to go into too much detail at this point, but give the reader a general sense of the debates that you’re intervening in.

This leads you into the most important part of the introduction: your aim, objectives and research question(s) . These should be clearly identifiable and stand out from the text – for example, you could present them using bullet points or bold font.

Make sure that your research questions are specific and workable – something you can reasonably answer within the scope of your dissertation. Avoid being too broad or having too many different questions. Remember that your goal in a dissertation proposal is to convince the reader that your research is valuable and feasible:

• Does social media harm mental health?
• What is the impact of daily social media use on 18– to 25–year–olds suffering from general anxiety disorder?

Now that your topic is clear, it’s time to explore existing research covering similar ideas. This is important because it shows you what is missing from other research in the field and ensures that you’re not asking a question someone else has already answered.

You’ve probably already done some preliminary reading, but now that your topic is more clearly defined, you need to thoroughly analyse and evaluate the most relevant sources in your literature review .

Here you should summarise the findings of other researchers and comment on gaps and problems in their studies. There may be a lot of research to cover, so make effective use of paraphrasing to write concisely:

• Smith and Prakash state that ‘our results indicate a 25% decrease in the incidence of mechanical failure after the new formula was applied’.
• Smith and Prakash’s formula reduced mechanical failures by 25%.

The point is to identify findings and theories that will influence your own research, but also to highlight gaps and limitations in previous research which your dissertation can address:

• Subsequent research has failed to replicate this result, however, suggesting a flaw in Smith and Prakash’s methods. It is likely that the failure resulted from…

Next, you’ll describe your proposed methodology : the specific things you hope to do, the structure of your research and the methods that you will use to gather and analyse data.

You should get quite specific in this section – you need to convince your supervisor that you’ve thought through your approach to the research and can realistically carry it out. This section will look quite different, and vary in length, depending on your field of study.

You may be engaged in more empirical research, focusing on data collection and discovering new information, or more theoretical research, attempting to develop a new conceptual model or add nuance to an existing one.

Dissertation research often involves both, but the content of your methodology section will vary according to how important each approach is to your dissertation.

Empirical research

Empirical research involves collecting new data and analysing it in order to answer your research questions. It can be quantitative (focused on numbers), qualitative (focused on words and meanings), or a combination of both.

With empirical research, it’s important to describe in detail how you plan to collect your data:

• Will you use surveys ? A lab experiment ? Interviews?
• What variables will you measure?
• How will you select a representative sample ?
• If other people will participate in your research, what measures will you take to ensure they are treated ethically?
• What tools (conceptual and physical) will you use, and why?

It’s appropriate to cite other research here. When you need to justify your choice of a particular research method or tool, for example, you can cite a text describing the advantages and appropriate usage of that method.

Don’t overdo this, though; you don’t need to reiterate the whole theoretical literature, just what’s relevant to the choices you have made.

Moreover, your research will necessarily involve analysing the data after you have collected it. Though you don’t know yet what the data will look like, it’s important to know what you’re looking for and indicate what methods (e.g. statistical tests , thematic analysis ) you will use.

Theoretical research

You can also do theoretical research that doesn’t involve original data collection. In this case, your methodology section will focus more on the theory you plan to work with in your dissertation: relevant conceptual models and the approach you intend to take.

For example, a literary analysis dissertation rarely involves collecting new data, but it’s still necessary to explain the theoretical approach that will be taken to the text(s) under discussion, as well as which parts of the text(s) you will focus on:

• This dissertation will utilise Foucault’s theory of panopticism to explore the theme of surveillance in Orwell’s 1984 and Kafka’s The Trial…

Here, you may refer to the same theorists you have already discussed in the literature review. In this case, the emphasis is placed on how you plan to use their contributions in your own research.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You’ll usually conclude your dissertation proposal with a section discussing what you expect your research to achieve.

You obviously can’t be too sure: you don’t know yet what your results and conclusions will be. Instead, you should describe the projected implications and contribution to knowledge of your dissertation.

First, consider the potential implications of your research. Will you:

• Develop or test a theory?
• Provide new information to governments or businesses?
• Challenge a commonly held belief?
• Suggest an improvement to a specific process?

Describe the intended result of your research and the theoretical or practical impact it will have:

Finally, it’s sensible to conclude by briefly restating the contribution to knowledge you hope to make: the specific question(s) you hope to answer and the gap the answer(s) will fill in existing knowledge:

Like any academic text, it’s important that your dissertation proposal effectively references all the sources you have used. You need to include a properly formatted reference list or bibliography at the end of your proposal.

Different institutions recommend different styles of referencing – commonly used styles include Harvard , Vancouver , APA , or MHRA . If your department does not have specific requirements, choose a style and apply it consistently.

A reference list includes only the sources that you cited in your proposal. A bibliography is slightly different: it can include every source you consulted in preparing the proposal, even if you didn’t mention it in the text. In the case of a dissertation proposal, a bibliography may also list relevant sources that you haven’t yet read, but that you intend to use during the research itself.

Check with your supervisor what type of bibliography or reference list you should include.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Caulfield, J. (2022, November 11). How to Write a Dissertation Proposal | A Step-by-Step Guide. Scribbr. Retrieved 29 April 2024, from https://www.scribbr.co.uk/thesis-dissertation/proposal/

Is this article helpful?

Jack Caulfield

Other students also liked, what is a dissertation | 5 essential questions to get started, what is a literature review | guide, template, & examples, what is a research methodology | steps & tips.

This main page relates to the course for 2022/23. For information regarding the 2023/24 MSc Dissertation, please see Open Course - DISS .

MSc Project Guide, 2022/23

Introduction.

The project is an essential component of the Masters courses. It is a substantial piece of full-time independent work starting in June. A dissertation describing the work must be submitted by a deadline in mid-August.

Students are expected to stay in Edinburgh for the duration of their degree programme. This includes during the writing of the MSc dissertation until the submission deadline. If you are on a Tier 4 visa and leave the country for an extended period of time, the School is obligated to contact Student Immigration Service who will notify UK Visa and Immigration (UKVI).) See MSc handbook .

The project involves both the application of skills learned in the past and the acquisition of new skills. It allows students to demonstrate their ability to organise and carry out a major piece of work according to sound scientific and engineering principles. The types of activity involved in each project will vary but all will typically share the following features:

• Research the literature and gather background information
• Analyse requirements, compare alternatives and specify a solution
• Design and implement the solution
• Experiment and evaluate the solution
• Develop written and oral presentation skills

Supervision

Supervisors enable students to complete the taught module Informatics Project Proposal (IPP) during Semester 2, and to carry out MSc projects over the summer.

Over the summer, the supervisor gives appropriate technical advice and also assists the student in planning the project and working towards various targets during the period of work. Students should expect approximately weekly meetings with their supervisor at the start of the project but the frequency of these meetings will normally drop as the project progresses and as students become more self-sufficient. Backup supervisors may be allocated to cover periods of absence of the supervisor, if necessary.

Choosing a Project

There are several steps

• Staff and (optionally) students propose MSc projects.
• Students then express interest in projects and potential supervisors mark interested students as suitable/unsuitable for the projects in question. At the end, every student needs to be marked suitable for 5 projects .
• Students rank their project choices in order of preference.
• Students are assigned a project and MSc supervisor.

Details on how to propose a project and select your project preferences are given below.

Student-proposed projects

Students can submit their own project proposal via the DPMT system . However, they need to find an interested supervisor, typically well in advance of the project selection deadline .

Self-proposed project supervisors should be a member of Academic staff or Research staff . The School’s Institutes pages are useful for finding staff in particular research areas, and to browse the broad research areas represented in the School.

This procedure of self-proposal is intended for students who know at the beginning of semester 2 (or earlier) what specific project they wish to do. The student must discuss their idea with a member of academic staff and get them agree to act as supervisor for the project. The MSc project coordinator will take self-proposed projects into account when making the allocation between students and MSc supervisors, and allocate a self-proposed project whenever feasible.

Students are not expected to propose a project; the default is that students will be assigned a staff-proposed project which they will flesh out into a fuller MSc project as an outcome of the taught module Informatics Project Proposal (henceforth IPP).

If you do wish to propose a project however, you must discuss your ideas with a member of staff and get them to commit to supervising your project before submitting a proposal. This will cover aspects such as the suitability of its topic, the methods to be used, any facilities or systems required, the form the results would take, any difficulties that might arise (i.e., risks), the likelihood that it can be completed and written up by the August deadline, etc. It is up to you to find a supervisor who is willing to supervise your project. Having done this, submit the proposal as instructed in the DPMT system with all the relevant details filled in. The deadline for completing the whole process (discussion with staff and filling in the proposal webform) is in the timetable . This staff member will then register as potential supervisor for your project in the DPMT system. (Green button “Register…” at the bottom of the page.)

If you want to do your self-proposed project with an external industrial partner as supervisor, you’ll still need an internal co-supervisor (i.e., an Informatics staff member) in addition to your external supervisor. (If your supervisor is a staff member at a different School at the University of Edinburgh, then no co-supervisor is required.)

See the guide for external supervisors

As always, your project proposal must be filed before the deadline Both the internal and external supervisor need to register for it.

Even if you self-propose a project, you still need to register interest in other projects, until you are marked suitable for 5 projects (including your self-proposed one). You might not get your self-proposed project if the named supervisor ends up with too many projects to supervise. Thus you need fall-backs.

There is no guarantee that all proposed projects will be allocated. However, any pairings between staff and students that happen as a result of student self-proposed project development during these first 2 weeks of the semester will be taken into account when assigning staff their MSc students.

Projects with Industrial Collaborators

Students who are sponsored by, or have close contact with an industrial company may wish to undertake a project which relates to that company’s activities. This is encouraged. Such collaborations can take two different forms:

• If the project is specific to a particular student, then the student should file a self-proposed project in DPMT and get both an internal supervisor (i.e., Informatics staff member) and an external supervisor (i.e., the industrial partner). These supervisors will need to register as supervisors for this particular project in DPMT. See the guide for external co-supervisors here .
• External people (i.e., not staff at UoE) can also propose topics for MSc thesis. (provided that they have a staff member as co-supervisor). However, in this case the topic is open to all students , and not reserved for one particular student. Students can then bid for these topics during the normal project selection phase.
• UoE staff from other departments (i.e., not Informatics) can also propose/supervise MSc projects. Unlike externals from industry, they do not necessarily need an internal Informatics co-supervisor. See the guide here .

Students doing a project with an industrial partner are still expected to spend a significant portion of their time at the University.

Selecting projects

Students can view the proposed projects from the DPMT system . The list of projects can be sorted by project title, number or supervisor name by clicking on the relevant columns. There is also a search facility (via project tags), so that you can find projects in specific areas.

Students must eventually be marked suitable (by the potential supervisor) for at least 5 MSc projects that they would like to do (this includes supervisors registering interest in any self-proposed projects, where relevant). To this end, students must register interest in projects via the DPMT system and must contact the project proposer. Before doing this, read project descriptions carefully: these often contain information about how to contact the proposer and what information to provide. This is so that the project proposer can provide feedback to the MSc project coordinator about the student's suitability for doing the project. The supervisor will then mark the student as either suitable or unsuitable for the project. Students who are marked unsuitable for some of their chosen projects must register interest in more projects until they are marked suitable for at least 5 projects.

See the timetable for when project selection phase ends. Students who lack five suitable projects by this date risk being assigned to one of the remaining un-allocated projects/supervisors. To be safe, please try to identify and register interest in an initial set of projects a week before this deadline.

Project selection step-by-step

Please follow all of the steps below, even if you proposed a self-proposed project and found a supervisor for it. We try to accommodate all self-proposed projects, but sometimes load-balancing constraints make it impossible. Thus you need fallback options.

Log into the DPMT system and take a detailed look through the list of proposed projects. You must be on campus or the School’s VPN to access DPMT.

Read the details of all projects that seem interesting, paying attention to “Essential Skills” and “Completion Criteria”. We try hard to make sure you get a project of your choice, but this is not always possible. Some projects are extremely popular, but many can only be allocated to one student. We also cannot guarantee that you will be assigned a project in your specialism area.

In the DPMT system you can register interest in projects. Start by registering interest in 5 projects. Try to do this before 3 February , as supervisors will be encouraged to review students for suitability at that point. Do not worry about your preference ranking at this stage. You may need to register interest in a few more projects later (see below).

If you register interest in a project, then you must contact the supervisor (and, ideally, the co-supervisor as well if there is one) and ask to discuss the project. Please see if there is guidance about how to do this in the project description. Just clicking a button in DPMT alone achieves nothing. This will give you a chance to learn more about the project and about the supervisor(s). It will also give the supervisor(s) a chance to assess if you have the right skills to do the project. Some supervisors may not be able to meet with you in person, in which case you will need to discuss the project via video chat or email. Some supervisors also hold pre-tests or group meetings to assess candidates.

The supervisor will then mark you as either “very suitable”, “suitable” or “unsuitable” for the project in the DPMT system. Normally, the only reason for being “unsuitable” is the student does not have the “Essential Skills” to undertake the project.

If you get marked “unsuitable” for some of your first 5 projects of interest, you need to register interest in a few more until you are “suitable” for 5. Please start doing this at least 4-5 days before the final selection deadline. Do not register interest in large numbers of projects, because you’d be wasting everybody’s time.

You can rank your projects in order of preference. We try to take these into account as far as possible, but remember that you might be assigned to any of your “suitable” projects, including your last choice. So choose carefully.

Getting the project you want

To maximise your chances of getting a project you want:

• Look at the project list to see how many other students registered interest in a given project. If that number is high, and the project does not have capacity for several students, then you are unlikely to get it. Choose a different project instead.
• Do not select all your projects from the same supervisor.
• Do not select all your projects in a narrow subject area.
• Consider interesting projects outside your specialism area.

If you do not register interest/attain “suitability” for 5 projects, you will be de-prioritized in the allocation. This means a significantly higher chance that you don’t get assigned to any project, and will have to choose from whatever projects are left over at the end.

See the timetable for the the deadline for the project selection phase. The final project allocation will be made shortly after that (see timetable).

If you have questions, the IPP/MSc project Piazza instance is a good venue for them.

When choosing projects, some issues you should consider are:

• Do you genuinely possess the essential skills listed in the proposal?
• Will you find the project interesting?
• Does it suit your degree?
• Are you up to the intellectual requirements of the project?

Project selection FAQ

Q: Does it help to register interest in a project early? A: There is no first-come first-serve for projects. It does not matter at all who registers interest in a project first; as long as you are marked suitable you will be a potential candidate for that project.

Q: Will I increase my odds of getting my top pick (or top 2 or 3) if I only register interest for that 1 (or 2 or 3) project(s)? A: No. It will decrease the odds. Our matchmaking system allocates students with five suitable projects first, so your preferences count for much less if you don’t have five.

Q: What if I do not meet the essential requirements but I am a quick learner and a hard worker? A: Many of our projects assume that you are both of those things in addition to meeting the essential requirements. Trying to bluff your way into a project is unlikely to be to your advantage.

Q: If I select an “Easy” project, does that mean I can’t get a high mark (e.g., 75+) on it? A: Generally, all projects can be expanded or executed in an unusually impressive way. If you worry a project that interests you might be an exception, ask the proposer.

Allocation of Projects and Supervisors to Students

The MSc project coordinator will allocate each student a project and MSc supervisor on the basis of the preferences expressed by students and the supervision load of individual supervisors. There will inevitably be difficulties when more than one student wishes to do the same project. Some supervisors’ proposals are much more popular than others. Students should not necessarily expect to get their first preference of project, or even (in rare cases) any of the preferences that they stated. This process of assigning students to supervisors and projects will be completed by a date given in the timetable .

These initial assignments of students to projects happens this early in the semester, so that the supervisors, together with the IPP tutors, can deliver to their MSc students the compulsory taught module IPP . However, there is flexibility in changing supervisors in at least two ways. First, a member of staff can, if they choose, delegate supervising duties to a member of research staff (with the researcher’s agreement). However, the staff member remains responsible for ensuring that the supervision meets acceptable standards. Secondly, a student can also choose to change supervisors, provided they get agreement from their existing supervisor and the proposed new supervisor. If there are problems between a student and supervisor that they can’t sort out themselves, then the student can consult with their Personal Tutor.

This flexibility for changing supervisor remains, until the deadline for changes to projects and supervisors given in the timetable . It is not possible to change supervisors after this date.

Plagiarism and other Academic Misconduct

Remember the good scholarly practice requirements of the University regarding work for credit. You can find guidance at the School page . This also has links to the relevant University pages.

See also the following general guide on how to avoid plagiarism .

Progress reports

Progress reports on your MSc projects are due in July; see the timetable for specifics.

The progress reports will NOT be graded. They are meant to be

• informational, for your supervisor and second-marker to verify that you are progressing and that you understand what you are doing;
• additional helpful practice with respect to the final report on your MSc projects, due in August.

The report should be 2-3 pages. It should specify:

• The goal of your project
• The methods you are using
• What you have accomplished so far
• What remains to be done to complete the project.

Submitting progress reports : Students submit their progress report on the LEARN page of DISS, menu item Assessment and then Progress Report on the page.

The Dissertation

The project is only assessed on the basis of a final written dissertation. Additional material, such as the code you submit, may be taken into account in case of doubt, but you should make sure that all the work you have done is carefully described in the dissertation document. All 60-credit MSc dissertations must conform to the following format: (The following limits on the length do not apply to EPCC, DSTI Dissertation (Distance Learning), Masters Dissertation (Design Informatics), and CDT thesis.)

The strict upper bound on the length is 40 pages for normal 60-credit MSc dissertations, excluding front matter (title, abstract, declaration) and bibliography. Theses should not be shorter than 20 pages. Where appropriate, the dissertation may additionally contain appendices in which relevant program listings, experimental data, circuit diagrams, formal proofs, etc. may be included. However, students should keep in mind that they are marked on the quality of the dissertation, not its length. The referees are not required to read any appendices.

The dissertation must be word-processed using LaTeX and must use the School of Informatics infthesis.cls style file according to the skeleton template provided. Any style changes to this LaTeX template (e.g., font size, page size, margins, or anything else) are strictly prohibited .

Additional points about building the thesis using LaTeX:

• The required infthesis.cls style file is installed on all DICE machines. If you run LaTeX on your personal computer you will need to install the following two files found on DICE: /usr/share/texmf/tex/latex/informatics/infthesis/infthesis.cls and /usr/share/texmf/tex/latex/common/logos/eushield.sty.
• Template files skeleton.tex, mybibfile.bib, skeleton.pdf can be downloaded here . The first two of these generate the skeleton thesis document with an example bibliography file, and illustrate correct use of the style. If you compile them yourself, you should get a document that looks like skeleton.pdf. Your dissertation must follow the example usage given in skeleton.tex.
• Additional documentation about LaTeX and LaTeX use within the School can be found here .

On submission of their dissertation, students will be required to certify that their dissertation satsifies these requirements on the length and style.

The typical structure of an Informatics MSc thesis is as follows:

• Title page with abstract.
• Introduction : an introduction to the document, clearly stating the hypothesis or objective of the project, motivation for the work and the results achieved. The structure of the remainder of the document should also be outlined.
• Background : background to the project, previous work, exposition of relevant literature, setting of the work in the proper context. This should contain sufficient information to allow the reader to appreciate the contribution you have made.
• Description of the work undertaken : this may be divided into chapters describing the conceptual design work and the actual implementation separately. Any problems or difficulties and the suggested solutions should be mentioned. Alternative solutions and their evaluation should also be included.
• Analysis or Evaluation : results and their critical analysis should be reported, whether the results conform to expectations or otherwise and how they compare with other related work. Where appropriate evaluation of the work against the original objectives should be presented.
• Conclusion : concluding remarks and observations, unsolved problems, suggestions for further work.
• Bibliography .

In addition, the dissertation must be accompanied by an ethics statement and an own-work declaration, as in the provided template. Your IPP should have planned for the projects ethics requirements, and review the academic conduct section above.

Writing a dissertation is time-consuming. Doing it well can take as long as four weeks of full-time work. You should write up explanations, results, and discussion as you go; this reduces the risk you will run out of time, and often clarifies and improves the research. Do not leave writing up until the last couple of weeks.

Some guidelines on the style of an MSc thesis.

• Focus on your own work . If previous work is provides essential context, cite it and direct the reader to it. Never copy and paste material from elsewhere into your dissertation and edit it.
• Keep the sections on Introduction and Background brief . Mention only background and related work that is necessary to understand and evaluate your work. (E.g., definitions what are used later in your theorems/proofs, or data on the performance of other methods so that you can compare it to your results.)
• Apart from what is necessary (see item above), do not do a lengthy repetition/discussion of background and related work in your dissertation. You already received credit for planning and review in IPP. This material must not be repeated without correctly citing this prior work (see Academic Conduct section). Most students will not want to repeat material from their IPP, as they will have an improved and more focussed view of the subject matter by the time they write their final project.
• Write your dissertation in a brief and concise style. Do not waste words. Do not repeat youself. Say it once, but clearly.
• Pay attention to the bibliography. We recommend that you read the guidelines for bibliography entries - it's easy to get this right, and failure to do so is a sign of sloppiness that the reader may suspect extends to other aspects of your work.

Some links to lectures on writing:

• Informatics Lecture 1. Getting started with writing your dissertation - July 2020 (21.11mins).
• Informatics Lecture 2. Writing your dissertation: IMRaD - July 2020 (19.29mins)
• Informatics Lecture 3. Writing Dissertations - Being Concise - July 2020 (27.33mins)

Computing Resources

The standard computing resource we provide is 24/7 access to communally used DICE machines; we cannot guarantee access to or a specific lab or specific machine, reliable constant remote access, or exclusive use of any machine.

By default, you and the project supervisor are responsible for providing any and all resources required to complete the project. If necessary, the supervisor should discuss any exceptional requirements with support and/or the ITO, and receive their approval before writing the proposal.

Technical problems during project work are only considered for resources we provide; no technical support, compensation for lost data, extensions for time lost due to technical problems with external hard- and software as provided will be given, except where this is explicitly stated as part of a project specification and adequately resourced at the start of the project.

Students must submit their project by the deadline (see the timetable of events ). Students need to submit an electronic copy and archive software as detailed below. Paper copies are not required.

Electronic Copy

Students must submit a PDF version of their thesis. These are included in an electronic archive that is accessible to future students. If there are good reasons why a thesis cannot be archived, ensure your supervisor knows the reasons and tick the appropriate box on the submission page.

Generating your thesis in pdf format should be straightforward, using LaTeX (or similar), or a “save to PDF” feature in most word processors. Take care to ensure that all figures, tables and listings are correctly incorporated into the pdf file you plan to submit.

Submit your PDF using this form .

When you submit the electronic copy of your thesis you will also be asked to provide an archive file (tar or zip) containing all the project materials. Students should use this to preserve any software they have generated, source, object and make files, together with any essential data. This material is not marked directly, but may be used to assess the accuracy of claims in the report. It should contain sufficient material for examiners to assess the completion of the project, the quality of the project, and the amount of work required to complete the project.

You should create a directory, for example named PROJECT , in your file space specifically for the purpose. Please follow the accepted practice of creating a README file which documents your files and their function. This directory should be compressed and then submitted, together with the electronic version of the thesis, via the submission webpage .

Your README should make clear where any data that you used came from, how it was processed, and how any outputs can be generated from the code that you have included. You do not normally need to include large datasets, model outputs, or model checkpoints in your archive. However, sometimes such data might be useful for follow-up projects in future years, or could be important for checking your work. Please discuss with your supervisor what to include.

Project Assessment

Projects are marked independently by the supervisor (1st marker) and the (centrally allocated) 2nd marker. The 1st and 2nd marker are not allowed to discuss marks until after both have filed their marking forms. Once both markers have filed their forms, they discuss the final mark, and one of them (usually the 1st marker) files the Agreed Mark Form. (If you fail to agree, then explain why on this form.) In certain circumstances the project will go to moderation (see below).

Projects are assessed in terms of a number of basic and other criteria. Only the dissertation is used for assessment. See also the common marking scheme . Knowledge of these criteria will help you to plan your project and also when writing up. They include:

• Understanding of the problem
• Completion of the work
• Quality of the work
• Quality of the dissertation
• Knowledge of the literature
• Critical evaluation of previous work
• Critical evaluation of own work
• Justification of design decisions
• Solution of conceptual problems
• Amount of work
• Evidence of outstanding merit e.g. originality
• Inclusion of material worthy of publication

Marks in the range of 45-49 allow a re-submission of the thesis by the student within 3 months, which will need to be re-marked (Taught Assessment Regulation 58). The marking guidelines can be found here and the policy on moderation can be found here .

Markers can find electronic copies of reports here . (Access problems? Contact Computing support to give you access.)

Marking is done via the webmark system . (Access problems? If you are UoE staff without an Informatics co-supervisor: Contact Computing support to give you access. If you are external and have an Informatics co-supervisor: Consult with your co-supervisor. It is his/her responsibility to file the marking form.)

Extensions are permitted and Extra Time Adjustments (ETA) for extensions are permitted. Please refer to Rule 3 here for further details. Please see Learn for the number of extension days that are permitted.

Important Dates

All the deadlines for the various tasks, including the deadline for submitting the thesis, can be found in the Timetable of Events .

While a demonstration is not a compulsory component of your MSc summer project, there are many circumstances in which providing your supervisor and your second marker with a demo will enable them to assess your achievements more accurately.

If you do decide to give them a demo, then your examiners will need to be convinced that:

• you actually did something,
• what you did was significant and
• you understand what you did.

You should also try to educate the examiners by clearly presenting:

• what was the problem you were trying to solve,
• how you tried to solve it, and
• what the results were.

As a guide to pitching the level of your explanations, assume that your examiners are ignorant of the particular problem you are investigating, but have a general background in the subject area. Often the second examiner is from outside your project area. So, be sure to introduce your project properly, don't just dive into the middle. What were the aims of the project, how did you go about achieving them, what results did you obtain, what difficulties did you have?

In a typical demo, you might:

• lay down rules about when the audience can ask questions
• explain what the project was about
• explain what you're going to show
• show it, but don't spend lots of time describing low-level implementation detail; stick at the `knowledge level' for the most part
• try to cover as much of the functionality as you reasonably can, so in general don't dwell too long on just one or two aspects
• say what else you might have done if you'd had a bit more time

Not all projects will follow this outline; modify it to suit your own particular project.

A demo should take about 20 minutes. You will probably find that this is quite a short time, but it is good practice to do it in this time because this is typically the time you will have to demo a system in other scenarios; e.g., at conferences. Given that 20 minutes is not long, you should:

• Plan your demo carefully to cover the relevant details in the allotted time.
• Make an outline of the demo including time to explain the problem, the solution and results.
• Skip minor details if there isn't enough time.
• Practise the demo beforehand, perhaps with another student.
• Consult with your supervisor over your outline.
• Make drawings, charts and tables to clarify the whole context and simplify presentation.
• Pre-store results displays on the computer if it takes a long time to generate them. How long it takes the computer to go through a demo varies by the load; hence, it might be better to avoid too much on-line demonstration if possible.

UCL Department of Economics

The MSc Dissertation

From June – early September students undertake a research project, lightly supervised by a member of faculty , and submit a 10,000 word dissertation on or before the deadline in early September. A good dissertation will be a piece of original research, the best dissertations are published . The three-months dissertation project gives you the opportunity to acquire and enhance a number of skills including research skills, project management, organisation, software and writing.

The research methods course supports you in this project, providing training in:

• Research and academic writing skills
• Software (Matlab, Python, R, and Stata)
• Empirical econometric skills.

In total, over 30 hours of lecture support skill acquisition directly relevant to the dissertation project. Helpdesks are also provided during the dissertation writing period. Dissertations fall into four categories:

Empirical Empirical dissertations typically take an econometric model from an existing paper and applying it to a new data set and / or extending it. Such a project involves:

•     A brief critical literature review of your chosen area
•     Finding and understanding your dataset
•     Learning the appropriate software
•     Implementing your model
•     Understanding, criticising and checking the robustness of your results.

Examples of recent empirical dissertations are:

•     Corruption and Education in the Developing World
•     Analysis of Chinese Stock Market Efficiency
•     UK Wage Flexibility in the Aftermath of the Great Recession
•     Hedonstic wage estimation and the market for head teachers: Evidence for England
•     Does Microcredit Crowd Out Traditional Moneylending? An Example From Hyderabad.
•     Estimating the Competitive Structure of the UK Petrol Retail Industry
•     The impact of paid work on women’s empowerment.

Theoretical Theoretical dissertations typically take model from an existing paper and extending it in some interesting way. Such a project involves:

•     Acquiring a deep understanding of your model, in the context of the core material you’ve covered

Examples of recent theoretical dissertations are:

•     An Investigation of a Network Targeting Model with Bounded Rational Consumers
•     The finite sample performance of single equation models of ordered choice
•     Rotating Savings and Credit Associations: A Theoretical Analysis
•     News aggregators and search engines: Thumping entrants in the newspapers industry
•     Disaster risk in a New Keynesian model

Policy Policy dissertations undertake a critical analysis of some previously unexplored policy or policy issue. Such a project involves:

•     A description of the economic principles involved in the policy decision
•     A critical appraisal of existing or proposed policies.

Note policy dissertations may often involve an empirical component Examples of recent dissertations are:

•     An assessment of the second round of quantitative easing policy in the UK: A BVAR approach
•     Capital controls on outflows during financial crises: Are they effective?
•     The technological factors in the economies of developing countries: Comparison of the effectiveness of public policies on innovation in Chile for local research and inward technology transfer
•     Welfare participation by immigrants in the UK
•     A study upon market structure characterised by regulation: Information and oligopoly conditions.

Analytical Survey An analytical survey dissertation provides a clear outline of the intellectual development of the a particular area. Such a project involves:

•     A thorough understanding of the literature in your chosen area
•     Explaining the extent to which different contributors were addressing similar of different questions and in what sense and how far one contribution marks a significant improvement over earlier ones.
•     Critically assessing the different contributions and of the field as a whole.

Examples of recent dissertations are:

•     Heterogeneous Adaptive Learning in Real Business Cycle Models
•     The Great Moderation: A critical survey since the crisis
•     What are the social costs and benefits of reversing innovations in mortgage markets?
•     What explains the top income surge?
•     A survey on observational learning and informational cascades: Are observational conditions simple enough to warrant simple predictions?

"I feel the course provided me with a far more sophisticated understanding of macroeconomic policy and a wealth of useful technical econometrics skills"

Widget Placeholder https://www.youtube.com/watch?v=68J5HqGhI00

UCL Graduate Prospectus

Still have questions?  Follow the link below to a list of frequently asked questions.  

Economics Handbook for MSc Students

If you have any questions please refer to the Frequently Asked Questions section of this website.

For further information please see the UCL pages for current students , or contact: [email protected]

Scheme of Award