presentation layer email

• Engineering Mathematics
• Discrete Mathematics
• Operating System
• Computer Networks
• Digital Logic and Design
• C Programming
• Data Structures
• Theory of Computation
• Compiler Design
• Computer Org and Architecture
• Computer Network Tutorial

Basics of Computer Network

• Basics of Computer Networking
• Introduction to basic Networking Terminology
• Goals of Networks
• Basic characteristics of Computer Networks
• Challenges of Computer Network
• Physical Components of Computer Network

Network Hardware and Software

• Types of Computer Networks
• LAN Full Form
• How to Set Up a LAN Network?
• MAN Full Form in Computer Networking
• MAN Full Form
• WAN Full Form
• Introduction of Internetworking
• Difference between Internet, Intranet and Extranet
• Protocol Hierarchies in Computer Network
• Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)
• Introduction of a Router
• Introduction of Gateways
• What is a network switch, and how does it work?

Network Topology

• Types of Network Topology
• Difference between Physical and Logical Topology
• What is OSI Model? - Layers of OSI Model
• Physical Layer in OSI Model
• Data Link Layer
• Session Layer in OSI model

Presentation Layer in OSI model

• Application Layer in OSI Model
• Protocol and Standard in Computer Networks
• Examples of Data Link Layer Protocols
• TCP/IP Model
• TCP/IP Ports and Its Applications
• What is Transmission Control Protocol (TCP)?
• TCP 3-Way Handshake Process
• Services and Segment structure in TCP
• TCP Connection Establishment
• TCP Connection Termination
• Fast Recovery Technique For Loss Recovery in TCP
• Difference Between OSI Model and TCP/IP Model

Medium Access Control

• MAC Full Form
• Channel Allocation Problem in Computer Network
• Multiple Access Protocols in Computer Network
• Carrier Sense Multiple Access (CSMA)
• Collision Detection in CSMA/CD
• Controlled Access Protocols in Computer Network

SLIDING WINDOW PROTOCOLS

• Stop and Wait ARQ
• Sliding Window Protocol | Set 3 (Selective Repeat)
• Piggybacking in Computer Networks

IP Addressing

• What is IPv4?
• What is IPv6?
• Introduction of Classful IP Addressing
• Classless Addressing in IP Addressing
• Classful Vs Classless Addressing
• Classless Inter Domain Routing (CIDR)
• Supernetting in Network Layer
• Introduction To Subnetting
• Difference between Subnetting and Supernetting
• Types of Routing
• Difference between Static and Dynamic Routing
• Unicast Routing - Link State Routing
• Distance Vector Routing (DVR) Protocol
• Fixed and Flooding Routing algorithms
• Introduction of Firewall in Computer Network

Congestion Control Algorithms

• Congestion Control in Computer Networks
• Congestion Control techniques in Computer Networks
• Computer Network | Leaky bucket algorithm
• TCP Congestion Control

Network Switching

• Circuit Switching in Computer Network
• Message switching techniques
• Packet Switching and Delays in Computer Network
• Differences Between Virtual Circuits and Datagram Networks

Application Layer:DNS

• Domain Name System (DNS) in Application Layer
• Details on DNS
• Introduction to Electronic Mail
• E-Mail Format
• World Wide Web (WWW)
• HTTP Full Form
• Streaming Stored Video
• What is a Content Distribution Network and how does it work?

CN Interview Quetions

• Top 50 Networking Interview Questions (2024)
• Top 50 TCP/IP interview questions and answers
• Top 50 IP addressing interview questions and answers
• Last Minute Notes - Computer Networks
• Computer Network - Cheat Sheet
• Network Layer
• Transport Layer
• Application Layer

Prerequisite : OSI Model

Introduction : Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model. This layer is also known as Translation layer, as this layer serves as a data translator for the network. The data which this layer receives from the Application Layer is extracted and manipulated here as per the required format to transmit over the network. The main responsibility of this layer is to provide or define the data format and encryption. The presentation layer is also called as Syntax layer since it is responsible for maintaining the proper syntax of the data which it either receives or transmits to other layer(s).

Functions of Presentation Layer :

The presentation layer, being the 6th layer in the OSI model, performs several types of functions, which are described below-

• Presentation layer format and encrypts data to be sent across the network.
• This layer takes care that the data is sent in such a way that the receiver will understand the information (data) and will be able to use the data efficiently and effectively.
• This layer manages the abstract data structures and allows high-level data structures (example- banking records), which are to be defined or exchanged.
• This layer carries out the encryption at the transmitter and decryption at the receiver.
• This layer carries out data compression to reduce the bandwidth of the data to be transmitted (the primary goal of data compression is to reduce the number of bits which is to be transmitted).
• This layer is responsible for interoperability (ability of computers to exchange and make use of information) between encoding methods as different computers use different encoding methods.
• This layer basically deals with the presentation part of the data.
• Presentation layer, carries out the data compression (number of bits reduction while transmission), which in return improves the data throughput.
• This layer also deals with the issues of string representation.
• The presentation layer is also responsible for integrating all the formats into a standardized format for efficient and effective communication.
• This layer encodes the message from the user-dependent format to the common format and vice-versa for communication between dissimilar systems.
• This layer deals with the syntax and semantics of the messages.
• This layer also ensures that the messages which are to be presented to the upper as well as the lower layer should be standardized as well as in an accurate format too.
• Presentation layer is also responsible for translation, formatting, and delivery of information for processing or display.
• This layer also performs serialization (process of translating a data structure or an object into a format that can be stored or transmitted easily).

Features of Presentation Layer in the OSI model: Presentation layer, being the 6th layer in the OSI model, plays a vital role while communication is taking place between two devices in a network.

List of features which are provided by the presentation layer are:

• Presentation layer could apply certain sophisticated compression techniques, so fewer bytes of data are required to represent the information when it is sent over the network.
• If two or more devices are communicating over an encrypted connection, then this presentation layer is responsible for adding encryption on the sender’s end as well as the decoding the encryption on the receiver’s end so that it can represent the application layer with unencrypted, readable data.
• This layer formats and encrypts data to be sent over a network, providing freedom from compatibility problems.
• This presentation layer also negotiates the Transfer Syntax.
• This presentation layer is also responsible for compressing data it receives from the application layer before delivering it to the session layer (which is the 5th layer in the OSI model) and thus improves the speed as well as the efficiency of communication by minimizing the amount of the data to be transferred.

Working of Presentation Layer in the OSI model : Presentation layer in the OSI model, as a translator, converts the data sent by the application layer of the transmitting node into an acceptable and compatible data format based on the applicable network protocol and architecture.  Upon arrival at the receiving computer, the presentation layer translates data into an acceptable format usable by the application layer. Basically, in other words, this layer takes care of any issues occurring when transmitted data must be viewed in a format different from the original format. Being the functional part of the OSI mode, the presentation layer performs a multitude (large number of) data conversion algorithms and character translation functions. Mainly, this layer is responsible for managing two network characteristics: protocol (set of rules) and architecture.

Presentation Layer Protocols : Presentation layer being the 6th layer, but the most important layer in the OSI model performs several types of functionalities, which makes sure that data which is being transferred or received should be accurate or clear to all the devices which are there in a closed network. Presentation Layer, for performing translations or other specified functions, needs to use certain protocols which are defined below –

• Apple Filing Protocol (AFP): Apple Filing Protocol is the proprietary network protocol (communications protocol) that offers services to macOS or the classic macOS. This is basically the network file control protocol specifically designed for Mac-based platforms.
• Lightweight Presentation Protocol (LPP): Lightweight Presentation Protocol is that protocol which is used to provide ISO presentation services on the top of TCP/IP based protocol stacks.
• NetWare Core Protocol (NCP): NetWare Core Protocol is the network protocol which is used to access file, print, directory, clock synchronization, messaging, remote command execution and other network service functions.
• Network Data Representation (NDR): Network Data Representation is basically the implementation of the presentation layer in the OSI model, which provides or defines various primitive data types, constructed data types and also several types of data representations.
• External Data Representation (XDR): External Data Representation (XDR) is the standard for the description and encoding of data. It is useful for transferring data between computer architectures and has been used to communicate data between very diverse machines. Converting from local representation to XDR is called encoding, whereas converting XDR into local representation is called decoding.
• Secure Socket Layer (SSL): The Secure Socket Layer protocol provides security to the data that is being transferred between the web browser and the server. SSL encrypts the link between a web server and a browser, which ensures that all data passed between them remains private and free from attacks.

Please Login to comment...

Similar reads.

Improve your Coding Skills with Practice

What kind of Experience do you want to share?

  Layer 6 Presentation Layer

De/Encryption, Encoding, String representation

The presentation layer (data presentation layer, data provision level) sets the system-dependent representation of the data (for example, ASCII, EBCDIC) into an independent form, enabling the syntactically correct data exchange between different systems. Also, functions such as data compression and encryption are guaranteed that data to be sent by the application layer of a system that can be read by the application layer of another system to the layer 6. The presentation layer. If necessary, the presentation layer acts as a translator between different data formats, by making an understandable for both systems data format, the ASN.1 (Abstract Syntax Notation One) used.

OSI Layer 6 - Presentation Layer

The presentation layer is responsible for the delivery and formatting of information to the application layer for further processing or display. It relieves the application layer of concern regarding syntactical differences in data representation within the end-user systems. An example of a presentation service would be the conversion of an EBCDIC-coded text computer file to an ASCII-coded file. The presentation layer is the lowest layer at which application programmers consider data structure and presentation, instead of simply sending data in the form of datagrams or packets between hosts. This layer deals with issues of string representation - whether they use the Pascal method (an integer length field followed by the specified amount of bytes) or the C/C++ method (null-terminated strings, e.g. "thisisastring\0"). The idea is that the application layer should be able to point at the data to be moved, and the presentation layer will deal with the rest. Serialization of complex data structures into flat byte-strings (using mechanisms such as TLV or XML) can be thought of as the key functionality of the presentation layer. Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.[1] Another example is representing structure, which is normally standardized at this level, often by using XML. As well as simple pieces of data, like strings, more complicated things are standardized in this layer. Two common examples are 'objects' in object-oriented programming, and the exact way that streaming video is transmitted. In many widely used applications and protocols, no distinction is made between the presentation and application layers. For example, HyperText Transfer Protocol (HTTP), generally regarded as an application-layer protocol, has presentation-layer aspects such as the ability to identify character encoding for proper conversion, which is then done in the application layer. Within the service layering semantics of the OSI network architecture, the presentation layer responds to service requests from the application layer and issues service requests to the session layer. In the OSI model: the presentation layer ensures the information that the application layer of one system sends out is readable by the application layer of another system. For example, a PC program communicates with another computer, one using extended binary coded decimal interchange code (EBCDIC) and the other using ASCII to represent the same characters. If necessary, the presentation layer might be able to translate between multiple data formats by using a common format. Wikipedia

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption

The Presentation OSI Layer is usually composed of 2 sublayers that are:

CASE common application service element

Sase specific application service element, layer 7   application layer, layer 6   presentation layer, layer 5   session layer, layer 4   transport layer, layer 3   network layer, layer 2   data link layer, layer 1   physical layer.

How-To Geek

The 7 osi networking layers explained.

The Open Systems Interconnection (OSI) networking model defines a conceptual framework for communications between computer systems.

Quick Links

• Physical Layer
• Data Link Layer
• Network Layer
• Transport Layer
• Session Layer
• Presentation Layer
• Application Layer

The Open Systems Interconnection (OSI) networking model defines a conceptual framework for communications between computer systems. The model is an ISO standard which identifies seven fundamental networking layers, from the physical hardware up to high-level software applications.

Each layer in the model handles a specific networking function. The standard helps administrators to visualize networks, isolate problems, and understand the use cases for new technologies. Many network equipment vendors advertise the OSI layer that their products are designed to slot into.

OSI was adopted as an international standard in 1984. It remains relevant today despite the changes to network implementation that have occurred since first publication. Cloud, edge, and IoT can all be accommodated within the model.

In this article, we'll explain each of the seven OSI layers in turn. We'll start from the lowest level, labelled as Layer 1.

1. Physical Layer

All networking begins with physical equipment. This layer encapsulates the hardware involved in the communications, such as switches and cables. Data is transferred as a stream of binary digits - 0 or 1 - that the hardware prepares from input it's been fed. The physical layer specifies the electrical signals that are used to encode the data over the wire, such as a 5-volt pulse to indicate a binary "1."

Errors in the physical layer tend to result in data not being transferred at all. There could be a break in the connection due to a missing plug or incorrect power supply. Problems can also arise when two components disagree on the physical encoding of data values. In the case of wireless connections, a weak signal can lead to bit loss during transmission.

2. Data Link Layer

The model's second layer concerns communication between two devices that are directly connected to each other in the same network. It's responsible for establishing a link that allows data to be exchanged using an agreed protocol. Many network switches operate at Layer 2.

The data link layer will eventually pass bits to the physical layer. As it sits above the hardware, the data link layer can perform basic error detection and correction in response to physical transfer issues. There are two sub-layers that define these responsibilities: Logical Link Control (LLC) that handles frame synchronization and error detection, and Media Access Control (MAC) which uses MAC addresses to constrain how devices acquire permission to transfer data.

3. Network Layer

The network layer is the first level to support data transfer between two separately maintained networks. It's redundant in situations where all your devices exist on the same network.

Data that comes to the network layer from higher levels is first broken up into packets suitable for transmission. Packets received from the remote network in response are reassembled into usable data.

The network layer is where several important protocols are first encountered. These include IP (for determining the path to a destination), ICMP, routing, and virtual LAN. Together these mechanisms facilitate inter-network communications with a familiar degree of usability. However operations at this level aren't necessarily reliable: messages aren't required to succeed and may not necessarily be retried.

4. Transport Layer

The transport layer provides higher-level abstractions for coordinating data transfers between devices. Transport controllers determine where data will be sent and the rate it should be transferred at.

Layer 4 is where TCP and UDP are implemented, providing the port numbers that allow devices to expose multiple communication channels. Load balancing is often situated at Layer 4 as a result, allowing traffic to be routed between ports on a target device.

Transport mechanisms are expected to guarantee successful communication. Stringent error controls are applied to recover from packet loss and retry failed transfers. Flow control is enforced so the sender doesn't overwhelm the remote device by sending data more quickly than the available bandwidth permits.

5. Session Layer

Layer 5 creates ongoing communication sessions between two devices. Sessions are used to negotiate new connections, agree on their duration, and gracefully close down the connection once the data exchange is complete. This layer ensures that sessions remain open long enough to transfer all the data that's being sent.

Checkpoint control is another responsibility that's held by Layer 5. Sessions can define checkpoints to facilitate progress updates and resumable transmissions. A new checkpoint could be set every few megabytes for a file upload, allowing the sender to continue from a particular point if the transfer gets interrupted.

Many significant protocols operate at Layer 5 including authentication and logon technologies such as LDAP and NetBIOS. These establish semi-permanent communication channels for managing an end user session on a specific device.

6. Presentation Layer

The presentation layer handles preparation of data for the application layer that comes next in the model. After data has made it up from the hardware, through the data link, and across the transport, it's almost ready to be consumed by high-level components. The presentation layer completes the process by performing any formatting tasks that may be required.

Decryption, decoding, and decompression are three common operations found at this level. The presentation layer processes received data into formats that can be eventually utilized by a client application. Similarly, outward-bound data is reformatted into compressed and encrypted structures that are suitable for network transmission.

TLS is one major technology that's part of the presentation layer. Certificate verification and data decryption is handled before requests reach the network client, allowing information to be consumed with confidence that it's authentic.

7. Application Layer

The application layer is the top of the stack. It represents the functionality that's perceived by network end users. Applications in the OSI model provide a convenient end-to-end interface to facilitate complete data transfers, without making you think about hardware, data links, sessions, and compression.

Despite its name, this layer doesn't relate to client-side software such as your web browser or email client. An application in OSI terms is a protocol that caters for the complete communication of complex data through layers 1-6.

HTTP, FTP, DHCP, DNS, and SSH all exist at the application layer. These are high-level mechanisms which permit direct transfers of user data between an origin device and a remote server. You only need minimal knowledge of the workings of the other layers.

The seven OSI layers describe the transfer of data through computer networks. Understanding the functions and responsibilities of each layer can help you identify the source of problems and assess the intended use case for new components.

OSI is an abstract model that doesn't directly map to the specific networking implementations commonly used today. As an example, the TCP/IP protocol works on its own simpler system of four layers: Network Access, Internet, Transport, and Application. These abstract and absorb the equivalent OSI layers: the application layer spans OSI L5 to L7, while L1 and L2 are combined in TCP/IP's concept of Network Access.

OSI remains applicable despite its lack of direct real-world application. It's been around so long that it's widely understood among administrators from all backgrounds. Its relatively high level of abstraction has also ensured it's remained relevant in the face of new networking paradigms, many of which have targeted Layer 3 and above. An awareness of the seven layers and their responsibilities can still help you appreciate the flow of data through a network while uncovering integration opportunities for new components.

Please Whitelist This Site? I know everyone hates ads. But please understand that I am providing premium content for free that takes hundreds of hours of time to research and write. I don't want to go to a pay-only model like some sites, but when more and more people block ads, I end up working for free. And I have a family to support, just like you. :) If you like The TCP/IP Guide, please consider the download version . It's priced very economically and you can read all of it in a convenient format without ads. If you want to use this site for free, I'd be grateful if you could add the site to the whitelist for Adblock. To do so, just open the Adblock menu and select "Disable on tcpipguide.com". Or go to the Tools menu and select "Adblock Plus Preferences...". Then click "Add Filter..." at the bottom, and add this string: "@@||tcpipguide.com^$document". Then just click OK. Thanks for your understanding! Sincerely, Charles Kozierok Author and Publisher, The TCP/IP Guide

The presentation layer is the sixth layer of the OSI Reference Model protocol stack, and second from the top. It is different from the other layers in two key respects. First, it has a much more limited and specific function than the other layers; it's actually somewhat easy to describe, hurray! Second, it is used much less often than the other layers; in many types of connections it is not required.

The name of this layer suggests its main function as well: it deals with the presentation of data. More specifically, the presentation layer is charged with taking care of any issues that might arise where data sent from one system needs to be viewed in a different way by the other system. It also takes care of any special processing that must be done to data from the time an application tries to send it until the time it is sent over the network.

Here are some of the specific types of data handling issues that the presentation layer handles:

The reason that the presentation layer is not always used in network communications is that the jobs mentioned above are simply not always needed. Compression and encryption are usually considered “optional”, and translation features are also only needed in certain circumstances. Another reason why the presentation layer is sometimes not mentioned is that its functions may be performed as part of the application layer.

The fact that the translation job done by the presentation layer isn't always needed means that it is common for it to be “skipped” by actual protocol stack implementations. This means that protocols at layer seven may talk directly with those at layer five. Once again, this is part of the reason why all of the functions of layers five through seven may be included together in the same software package, as described in the overview of layers and layer groupings .

Presentation Layer

Last Edited

What is the Presentation Layer?

Presentation Layer is the Layer 6 of the seven-layer Open Systems Interconnection (OSI) reference model . The presentation layer structures data that is passed down from the application layer into a format suitable for network transmission. This layer is responsible for data encryption, data compression, character set conversion, interpretation of graphics commands, and so on. The network redirector also functions at this layer.

Presentation Layer functions

• Translation:  Before being transmitted, information in the form of characters and numbers should be changed to bit streams. Layer 6 is responsible for interoperability between encoding methods as different computers use different encoding methods. It translates data between the formats the network requires and the format the computer.
• Encryption:  Encryption at the transmitter and decryption at the receiver
• Compression:  Data compression to reduce the bandwidth of the data to be transmitted. The primary role of  data compression  is to reduce the number of bits to be transmitted. Multimedia files, such as audio and video, are bigger than text files and compression is more important.

Role of Presentation Layer in the OSI Model

This layer is not always used in network communications because its functions are not always necessary. Translation is only needed if different types of machines need to talk with each other. Encryption is optional in communication. If the information is public there is no need to encrypt and decrypt info. Compression is also optional. If files are small there is no need for compression.

Explaining Layer 6 in video

Most real-world protocol suites, such as TCP/IP , do not use separate presentation layer protocols. This layer is mostly an abstraction in real-world networking.

An example of a program that loosely adheres to layer 6 of OSI is the tool that manages the Hypertext Transfer Protocol (HTTP) — although it’s technically considered an application-layer protocol per the TCP/IP model.

However, HTTP includes presentation layer services within it. HTTP works when the requesting device forwards user requests passed to the web browser onto a web server elsewhere in the network.

It receives a return message from the web server that includes a multipurpose internet mail extensions (MIME) header. The MIME header indicates the type of file – text, video, or audio – that has been received so that an appropriate player utility can be used to present the file to the user.

In short, the presentation layer

Makes sure that data which is being transferred or received should be accurate or clear to all the devices which are there, in a closed network.

• ensures proper formatting and delivery to and from the application layer;
• performs data encryption; and
• manages serialization of data objects.

OSI Seven Layers Model Explained with Examples

This tutorial explains the OSI reference model. Learn the seven layers of the OSI model and the functions of each layer in detail through examples.

The OSI (Open System Interconnection) reference model is a comprehensive set of standards and rules for hardware manufacturers and software developers. By following these standards, they can build networking components and software applications that work in any environment. It was published in 1984 by ISO (International Organization for Standardization).

It provides a framework for creating and implementing networking standards, devices, and internetworking schemes. It explains the networking from a modular perspective, making it easier to understand and troubleshoot.

Seven layers of the OSI Model

The OSI model has seven different layers, which are divided into two groups. The following table lists all the layers with their names and numbers.

Let’s understand each layer in detail.

This tutorial is the second part of the article " Networking reference models explained in detail with examples. ". Other parts of this article are the following.

This tutorial is the first part of the article. It summarizes why the OSI model was created and what advantages it has.

This tutorial is the third part of the article. It compares the OSI reference model with the TCP/IP model and lists the similarities and differences between both.

This tutorial is the fourth part of the article. It explains the five layers of the TCP/IP model in detail.

This tutorial is the fifth part of the article. It explains how data is encapsulated and de-encapsulated when it passes through the layers.

The Application Layer

This is the last and topmost layer of the OSI model. This layer provides an interface between the local system and the application program running on the network. If an application wants to use the resources available on the remote system, it interacts with this layer. Then, this layer provides the protocols and services that the application needs to access those resources.

There are two types of application programs: Network-aware and Network-unaware . An application program is considered a Network-aware application if it can make any type of network request. If an application program cannot make any type of network request, it is considered a Network-unaware program.

Network-aware programs are further divided into two types.

Programs that are mainly built to work on a local system. This type of program occasionally accesses the network for particular reasons such as updates, documentation, and troubleshooting. MS-Word, Adobe-Photoshop, and VLC Player are examples of this type of program.

Programs that are mainly built to work with a remote system. This type of program provides a platform to access resources available on a remote system. This type of program only works if the system is connected to the network. SSH, FTP, and TFTP are examples of this type of program.

The Application layer describes only the programs which fall in the second type. But it doesn’t mean that the first type of programs can’t take the advantage of the Application layer. It simply means that they are not documented in the Application layer. But if required, they can also connect to the network through the Application layer.

The Top layer of the OSI model is the application layer. It provides the protocols and services that are required by the network-aware applications to connect to the network. FTP, TFTP, POP3, SMTP, and HTTP are examples of standards and protocols used in this layer.

The Presentation Layer

The sixth layer of the OSI model is the Presentation layer. Applications running on the local system may or may not understand the format that is used to transmit the data over the network. The presentation layer works as a translator. When receiving data from the Application layer, it converts that data in such a format that can be sent over the network. When receiving data from the Session layer, it reconverts the data in such a format that the application, which will use it, can understand.

Conversion, compression, and encryption are the main functions that the Presentation layer performs on the sending computer while on the receiving computer these functions are reconversion, decompression, and decryption. ASCII, BMP, GIF, JPEG, WAV, AVI, and MPEG are examples of standards and protocols that work in this layer.

The Session Layer

The session layer is the fifth layer of the OSI model. It is responsible for setting up, managing, and dismantling sessions between presentation layer entities and providing dialogs between computers.

When an application makes a network request, this layer checks whether the requested resource is available on the local system or on a remote system. If the requested resource is available on a remote system, it tests whether a network connection to access that resource is available or not. If a network connection is not available, it sends an error message back to the application informing that the connection is not available.

If a network connection is available, it establishes a session with the remote system. For each request, it uses a separate session. This allows multiple applications to send or receive data simultaneously. When data transmission is completed, it terminates the session.

The session layer is responsible for establishing, managing, and terminating communications between two computers. RPCs and NFS are examples of the session layer.

The Transport Layer

The transport layer is the fourth layer of the OSI model. It provides the following functionalities: -

Segmentation

On the sending computer, it breaks the data stream into smaller pieces. Each piece is known as a segment and the process of breaking the data stream into smaller pieces is known as the segmentation . On the receiving computer, it joins all segments to recreate the original data stream.

Data transportation

This layer establishes a logical connection between the sending system and receiving system and uses that connection to provide end-to-end data transportation. This process uses two protocols: TCP and UDP.

The TCP protocol is used for reliable data transportation. TCP is a connection-oriented protocol. UDP protocol is used for unreliable data transportation. UDP is a connection-less protocol.

The main difference between a connection-less and connection-oriented protocol is that a connection-oriented protocol provides reliable data delivery. For reliable data delivery, it uses several mechanisms such as the three-way handshake process, acknowledgments, sequencing, and flow control.

Multiplexing

Through the use of port numbers, this layer also provides connection multiplexing. Connection multiplexing allows multiple applications to send and receive data simultaneously.

The main functionalities of the Transport layer are segmentation, data transportation, and connection multiplexing. For data transportation, it uses TCP and UDP protocols. TCP is a connection-oriented protocol. It provides reliable data delivery.

The Network Layer

The third layer of the OSI model is the Network Layer. This layer takes the data segment from the Transport layer and adds a logical address to it. A logical address has two components; network partition and host partition. The Network partition is used to group networking components while the host partition is used to uniquely identify a system on the network. A logical address is known as the IP address. Once the logical address and other related information are added to the segment , it becomes the packet .

This layer decides whether the packet is intended for the local system or a remote system. It also specifies the standards and protocols which are used to move data packets over networks.

To move data packets between two different networks, a device known as the router is used. Routers use the logical address to make the routing decision. Routing is the process of forwarding data packets to their destination.

Defining logical addresses and finding the best path to reach the destination address are the main functions of this layer. Routers work in this layer. Routing also takes place in this layer. IP, IPX, and AppleTalk are examples of this layer.

The Data Link Layer

The Data Link Layer is the second layer of the OSI model. This layer defines how networking components access the media and what transmission methods they use. This layer has two sub-layers: MAC and LLC.

MAC (Media Access Control)

This sub-layer defines how the data packets are placed in media. It also provides physical addressing. The physical address is known as the MAC address. Unlike logical addresses that need to be configured, physical addresses are pre-configured in NIC. The MAC address is used to uniquely identify a host in the local network.

LLC (Logical Link Control)

This sub-layer identifies the network layer protocol. On the sending computer, it encapsulates the information of the Network Layer protocol in the LLC header from which the Data Link layer receives the data packet. On the receiving computer, it checks the LLC header to get the information about the network layer protocol. This way, a data packet is always delivered to the same network layer protocol from which it was sent.

Defining physical addresses, finding hosts in the local network, specifying standards and methods to access the media are the primary functions of this layer. Switching takes place in this layer. Switches and Bridges work in this layer. HDLC, PPP, and Frame Relay are examples of this layer.

The Physical Layer

The Physical Layer is the first layer of the OSI model. This layer specifies the standards for devices, media, and technologies that are used in moving the data across the network such as:-

• Type of cable used in connecting the devices
• Patterns of pins used in both sides of the cable
• Type of interface-card used in the networking device
• Type of connector used to connect the cable with the network interface
• Encoding of digital signals received from the Data Link layer based on the attached media type such as electrical for copper, light for fiber, or a radio wave for wireless.

On the sending computer, it converts digital signals received from the Data Link layer, into analog signals and loads them on the physical media. On the receiving computer, it picks analog signals from the media and converts them into digital signals, and transfers them to the Data Link layer for further processing.

The Physical Layer mainly defines standards for media and devices that are used to move data across the network. 10BaseT, 10Base100, CSU/DSU, DCE, and DTE are examples of the standards used in this layer.

That’s all for this tutorial. In the next part of this article, we will compare the OSI model with the TCP/IP model and explains the similarities and differences between both models. If you like this tutorial, please don’t forget to share it with friends.

By ComputerNetworkingNotes Updated on 2024-01-25 05:30:01 IST

ComputerNetworkingNotes CCNA Study Guide OSI Seven Layers Model Explained with Examples

We do not accept any kind of Guest Post. Except Guest post submission, for any other query (such as adverting opportunity, product advertisement, feedback, suggestion, error reporting and technical issue) or simply just say to hello mail us [email protected]

• Selected Reading
• UPSC IAS Exams Notes
• Developer's Best Practices
• Questions and Answers
• Effective Resume Writing
• HR Interview Questions
• Computer Glossary

The Presentation Layer of OSI Model

The presentation layer (Layer 6) ensures that the message is presented to the upper layer in a standardized format. It deals with the syntax and the semantics of the messages.

The main functions of the presentation layer are as follows −

• It encodes the messages from the user dependent format to the common format and vice versa, for communication among dissimilar systems.
• It is responsible for data encryption and decryption of sensitive data before they are transmitted over common channels.
• It is also responsible for data compression. Data compression is done at the source to reduce the number of bits to be transmitted. It reduces the storage space and increases the file transfer rate. It is particularly useful for transmission of large multimedia files.

Related Articles

• The Physical Layer of OSI Model
• The Network Layer of OSI Model
• The Transport Layer of OSI Model
• The Session Layer of OSI Model
• The Application Layer of OSI Model
• The Data Link Layer of OSI Model
• Explain the functions of Presentation Layer.
• What is Presentation Layer?
• The OSI Reference Model
• What is a presentation layer?
• Advantages and Disadvantages of the OSI Model
• Computer Networks – Layers of OSI Model
• What is the OSI Reference Model?
• OSI Model in Computer Networking
• Why Does the OSI Reference Model Matter?

Kickstart Your Career

Get certified by completing the course

Stop inbound email threats and drive security awareness.

Authenticate email and identify risky suppliers.

Protect identities in hybrid enterprises from account takeover.

Defend data and manage insider threat.

Leverage proactive expertise, operational continuity and deeper insights from our skilled experts.

Human-centric cybersecurity packages from Proofpoint. Complete protection against today's risks—tailored to your organization's unique needs. Maximize security. Optimize value.

Protect your people from email and cloud threats with an intelligent and holistic approach.

Help your employees identify, resist and report attacks before the damage is done.

Prevent data loss via negligent, compromised and malicious insiders by correlating content, behavior and threats.

Manage risk and data retention needs with a modern compliance and archiving solution.

Keep your people and their cloud apps secure by eliminating threats, avoiding data loss and mitigating compliance risk.

Learn about this growing threat and stop attacks by securing today’s top ransomware vector: email.

Implement the very best security and compliance solution for your Microsoft 365 collaboration suite.

Secure access to corporate resources and ensure business continuity for your remote workers.

Protect your email deliverability with DMARC.

Today’s cyber attacks target people. Learn about our unique people-centric approach to protection.

Become a channel partner. Deliver Proofpoint solutions to your customers and grow your business.

Learn about Proofpoint Extraction Partners.

Learn about our global consulting and services partners that deliver fully managed and integrated solutions.

Learn about our relationships with industry-leading firms to help protect your people, data and brand.

Learn about the technology and alliance partners in our Social Media Protection Partner program.

Small Business Solutions for channel partners and MSPs.

Find the information you're looking for in our library of videos, data sheets, white papers and more.

Keep up with the latest news and happenings in the ever‑evolving cybersecurity landscape.

Learn about the human side of cybersecurity. Episodes feature insights from experts and executives.

Get the latest cybersecurity insights in your hands – featuring valuable knowledge from our own industry experts.

Learn about the latest security threats and how to protect your people, data, and brand.

Connect with us at events to learn how to protect your people and data from ever‑evolving threats.

Read how Proofpoint customers around the globe solve their most pressing cybersecurity challenges.

Browse our webinar library to learn about the latest threats, trends and issues in cybersecurity.

Get free research and resources to help you protect against threats, build a security culture, and stop ransomware in its tracks.

Proofpoint is a leading cybersecurity company that protects organizations' greatest assets and biggest risks: their people.

Stand out and make a difference at one of the world's leading cybersecurity companies.

Read the latest press releases, news stories and media highlights about Proofpoint.

Learn about how we handle data and make commitments to privacy and other regulations.

Learn about our people-centric principles and how we implement them to positively impact our global community.

Access the full range of Proofpoint support services.

What Is the OSI Model?

Table of contents, a brief history of the osi model, why it matters, the seven layers of osi, how data flows through the osi model.

The Open Systems Interconnection (OSI) Model is a conceptual framework that defines how networking systems communicate and send data from a sender to a recipient. The model is used to describe each component in data communication so that rules and standards can be established regarding applications and network infrastructure. The OSI model contains seven layers that conceptually stack from the bottom to the top. The OSI layers include: Physical, Data Link, Network, Transport, Session, Presentation, and Application.

Cybersecurity Education and Training Begins Here

Here’s how your free trial works:.

• Meet with our cybersecurity experts to assess your environment and identify your threat risk exposure
• Within 24 hours and minimal configuration, we’ll deploy our solutions for 30 days
• Experience our technology in action!
• Receive report outlining your security vulnerabilities to help you take immediate action against cybersecurity attacks

Fill out this form to request a meeting with our cybersecurity experts.

Thank you for your submission.

The OSI Model was established in 1984 to create a standard for the way networks were designed and equipment was manufactured. Without the OSI Model, there would be no standard way to design infrastructure and the protocols used for communication, so it would be more difficult for administrators to install new equipment and integrate it with networks outside of their own. With these standards, administrators can design their own infrastructure, but the equipment can still universally communicate with others.

When the OSI Model was established, the seven layers were defined to follow standard principles:

• Each layer has a separate level of abstraction.
• Each layer performs a defined function.
• Layers are defined to create international standardized protocols.
• Layers facilitate communication across infrastructure and applications.
• Each layer corresponds to a specific function within network communication.

Standardizing communication across a network, including external networks (e.g., the cloud internet), facilitates communication regardless of where data is sent or from where it is received. The OSI Model enables manufacturers to create their own protocols and equipment standards while allowing for interconnectivity with other manufacturers.

Another benefit of the OSI Model is easier troubleshooting. When a network component fails, or an application does not communicate with the network, the OSI Model helps administrators troubleshoot which layer and essentially which component is failing. The standardization of modern technology facilitates building, manufacturing, troubleshooting, and designing new technology in the future.

Cloud Security

Get secure access to the web and cloud services

OSI is broken down into layers. Each layer has a specific function and communicates and works with the layer below and above it. The OSI Model is conceptual, but its design enables both physical and virtual communication across a network. We’ll start with layer 7, which is the uppermost layer on the stack.

Layer 7 – The Application Layer

Layer 7 is the layer most people are familiar with because it communicates directly with the user. An application that runs on a device might communicate with other OSI layers, but the interface runs on layer 7. For instance, an email client that transfers messages between client and server runs on layer 7. When a message is received on the client software, the application layer is what presents it to the user. Application protocols include SMTP (Simple Mail Transfer Protocol) and HTTP, which is the protocol for communication between browsers and web servers.

Layer 6 – The Presentation Layer

We mentioned that the application layer displays information to users, but the presentation layer of the OSI model is what prepares data so that it can be displayed to the user. It’s common for two different applications to use encoding. For instance, communicating with a web server over HTTPS uses encrypted information. The presentation layer is responsible for encoding and decoding information so that it can be displayed in plaintext. The presentation layer is also responsible for compressing and decompressing data as it travels from one device to another.

Layer 5 – The Session Layer

To communicate between two devices, an application must first create a session. A session is unique to the user and identifies them on the remote server. The session must be open long enough for data to be transferred but still closed after the transfer is complete. When large volumes of data are transferred, the session is responsible for ensuring that the file is completely transferred, and retransmission is established, should the data be incomplete. For instance, if 10MB of data is transferred and only 5MB completes, the session layer ensures that only 5MB is retransferred. This transfer makes communication over a network more efficient instead of wasting resources and transferring the entire file again.

Layer 4 – The Transport Layer

The transport layer is responsible for taking data and breaking it up into smaller chunks. When data is transferred across a network, it is not transferred as one packet. To make transfers more efficient and faster, the transport layer breaks data into smaller segments. These smaller segments contain header information that can be reassembled at the target device. Segmented data also has error control to tell the session layer to reestablish a connection should packets fail to fully transfer to the target recipient.

Layer 3 – The Network Layer

The network layer is responsible for breaking up the data on the sender’s device and reassembling it on the recipient’s device when the transmission is across two different networks. When communicating within the same network, the network layer is unnecessary, but most users connect to other networks, such as cloud networks . When data travels across different networks, the network layer is responsible for creating small data packets routed to their destination and then rebuilt on the recipient’s device.

Layer 2 – The Data Link Layer

The network layer facilitates communication across different networks, but the data link layer is responsible for transferring information on the same network. The data link layer turns packets received from the network layer into frames. Just like the network layer, the data link layer is responsible for error control and flow to ensure successful transmission.

Layer 1 – The Physical Layer

Just as the name suggests, the physical layer is responsible for the equipment that facilitates data transfer, such as cables and routers installed on the network. This layer is one aspect of network transmission, where standards are essential. Without standards, transmission across different manufacturer devices is impossible.

Secure Email Relay

Advanced solution for your application email

Data flows from layer 7 down to layer 1 from the sender, and then flows from layer 1 to layer 7 on the recipient device. The simplest example of communication flow through the OSI Model is an email application.

When a sender clicks “Send” on an email application, the message is sent to the presentation layer using a defined protocol (SMTP for outgoing email). The presentation layer compresses the data and sends the message to the session layer, which opens a session for communication between the sender’s device and the outgoing server.

The message is sent to the transport layer where data is segmented, and then the network layer breaks the segments into packets. Then, the packets are sent from the network layer to the data link layer, where packets are further broken down into frames. The frames are sent to the physical layer where data is converted to bitstreams of ones and zeros and transferred across a medium such as wireless connections or cables.

When the message reaches the recipient, the process is reversed. Data is sent from the physical layer to the application layer, where data is converted from the bitstream ones and zeros to the message available in the recipient’s email client. When a message is sent back to the sender, the process is repeated, and communication flows down to layer 1 from layer 7 and back up the OSI Model when it reaches the recipient’s device.

Related Resources

Three reasons to move from legacy dlp, the data breach is coming from inside the house.

Subscribe to the Proofpoint Blog

Ready to Give Proofpoint a Try?

Start with a free Proofpoint trial.

PrepBytes Blog

ONE-STOP RESOURCE FOR EVERYTHING RELATED TO CODING

Sign in to your account

Forgot your password?

Login via OTP

We will send you an one time password on your mobile number

An OTP has been sent to your mobile number please verify it below

Register with PrepBytes

Presentation layer in osi model.

Last Updated on March 7, 2024 by Abhishek Sharma

The OSI (Open Systems Interconnection) model is a conceptual framework used to understand the functions of a telecommunication or computing system. It consists of seven layers, each responsible for specific tasks. The sixth layer, known as the Presentation Layer, plays a crucial role in ensuring that data exchanged between systems is readable and usable. Let’s explore the functions and importance of the Presentation Layer in the OSI model.

What is Presentation Layer in OSI Model?

The Presentation Layer, the sixth layer of the OSI (Open Systems Interconnection) model, is responsible for ensuring that data exchanged between systems is in a format that can be interpreted and used by the receiving system. It performs various functions, including data translation, encryption, compression, and formatting, to facilitate efficient and secure communication between networked devices.

Functions of the Presentation Layer

Below are some of the functions of the Presentation Layer in OSI Model:

• Data Translation: The Presentation Layer translates data from the format used by the application layer into a format that can be transmitted over the network. This includes encoding, compression, and encryption.
• Data Formatting: It ensures that data is formatted according to the specifications of the application layer. This includes converting between different character sets, such as ASCII and Unicode.
• Data Compression: The Presentation Layer compresses data to reduce the amount of bandwidth required for transmission, improving network efficiency.
• Data Encryption: It encrypts data to ensure that it remains secure during transmission, protecting it from unauthorized access.
• Data Syntax: The Presentation Layer defines the syntax for data representation, ensuring that both the sender and receiver understand the structure of the data being exchanged.

Importance of the Presentation Layer

Importance of Presentation Layer are:

• Data Integrity: By ensuring that data is formatted correctly and encrypted, the Presentation Layer helps maintain the integrity of data during transmission.
• Interoperability: The Presentation Layer enables different systems to communicate with each other by ensuring that data is translated into a common format that both systems understand.
• Efficiency: Data compression reduces the amount of data that needs to be transmitted, improving network efficiency and reducing bandwidth requirements.
• Security: Encryption provided by the Presentation Layer ensures that data remains secure and protected from unauthorized access.

Conclusion The Presentation Layer is a crucial component of the OSI model, responsible for ensuring that data exchanged between systems is in a format that can be understood and used. By performing functions such as data translation, formatting, compression, and encryption, the Presentation Layer plays a vital role in maintaining data integrity, facilitating interoperability, and ensuring the security of data during transmission.

FAQs related to Presentation Layer in OSI Model

Here are some of the FAQs related to Presentation Layer in OSI Model:

Q1: What is the role of the Presentation Layer in the OSI model? The Presentation Layer ensures that data exchanged between systems is in a usable format, performing functions such as data translation, encryption, compression, and formatting.

Q2: How does the Presentation Layer ensure data security? The Presentation Layer encrypts data before transmission, making it unreadable to unauthorized parties, thus ensuring data security.

Q3: Why is data compression important in the Presentation Layer? Data compression reduces the size of data packets, leading to faster transmission speeds and optimized bandwidth usage, which is crucial in high-traffic networks.

Q4: How does the Presentation Layer facilitate interoperability between systems? By translating data into a common format that both sender and receiver understand, the Presentation Layer enables different systems to communicate with each other seamlessly.

Q5: Can the Presentation Layer be bypassed in data transmission? While it is possible to bypass the Presentation Layer in some cases, doing so can lead to compatibility issues between systems and is not recommended.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Linked List
• Segment Tree
• Backtracking
• Dynamic Programming
• Greedy Algorithm
• Operating System
• Company Placement
• Interview Tips
• General Interview Questions
• Data Structure
• Other Topics
• Computational Geometry
• Game Theory

Related Post

Quantum cryptography, introduction to sniffers, multiplexing and demultiplexing in transport layer, transport layer responsibilities, tacacs+ and radius.

Presentation Layer: Protocols, Examples, Services | Functions of Presentation Layer

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts. Now, we will explain about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. At the end of this article, you will completely educate about What is Presentation Layer in OSI Model without any hassle.

• What is Presentation Layer?

Definition : Presentation layer is 6th layer in the OSI model , and its main objective is to present all messages to upper layer as a standardized format. It is also known as the “ Translation layer “.  This layer takes care of syntax and semantics of messages exchanged in between two communication systems. Presentation layer has responsible that receiver can understand all data, and it will be to implement all data languages can be dissimilar of two communication system.

Presentation layer is capable to handle abstract data structures, and further it helps to defined and exchange of higher-level data structures.

Presentation Layer Tutorial Headlines:

In this section, we will show you all headlines about this entire article; you can check them as your choice; below shown all:

• Functions of Presentation Layer

Protocols of Presentation Layer

• Example of Presentation Layer Protocols

Presentation Layer Services

Design issues with presentation layer, faqs (frequently asked questions), what is meant by presentation layer in osi model, what protocols are used in the presentation layer, can you explain some presentation layer examples, what are the main functions of the presentation layer, what are services of presentation layer in osi, let’s get started,   functions of presentation layer.

Presentation layer performs various functions in the OSI model ; below explain each one – 

• Presentation layer helps to translate from American standard code for information interchange (ASCII) to the extended binary code decimal interchange code (EBCDIC).
• It deals with user interface as well as supporting for several services such as email and file transfer.
• It provides encoding mechanism for translating all messages from user dependent format with common format and vice – versa.
• It’s main goal for data encryption and decryption of entire data before they are getting transmission over all common platforms.
• It provides data compression mechanism for source point to decrease the all bits which are transmitted. Due to this data compression system, user are able to transmit enlarge multimedia file at fastest file transfer rate.
• Due to use of Data Encryption and Decryption algorithm, presentation layer provides more network protection and confidentiality while transmission data over the entire network.
• This layer offers best flexibility for data translation for making connections with various kinds of servers , computers, and mainframes over the similar network.
• Presentation layer has responsible to fix all translations in between all network systems .

Presentation layer is used various protocols; below list is available –

• Multipurpose Internet Mail Extensions
• File Transfer Protocol
• Network News Transfer Protocol
• Apple Filing Protocol (AFP)
• Independent Computing Architecture (ICA), the Citrix system core protocol
• Lightweight Presentation Protocol (LPP)
• NetWare Core Protocol (NCP)
• Network Data Representation (NDR)
• Telnet (a remote terminal access protocol)
• Tox Protocol
• eXternal Data Representation (XDR)
• 25 Packet Assembler/Disassembler Protocol (PAD)

Example of Presentation Layer Protocols:

Here, we will discuss all examples of presentation layer protocols; below explain each one –  

Multipurpose Internet Mail Extensions (MIME) : MIME protocol was introduced by Bell Communications in 1991, and it is an internet standard that provides scalable capable of email for attaching of images, sounds and text in a message.

File Transfer Protocol (FTP) : FTP is a internet protocol, and its main goal is to transmit all files in between one host to other hosts over the internet on TCP/IP connections.

Network News Transfer Protocol (NNTP) : This protocol is used to make connection with Usenet server and transmit all newsgroup articles in between system over internet.

Apple Filing Protocol (AFP ) : AFP protocol is designed by Apple company for sharing all files over the entire network .

Lightweight Presentation Protocol (LPP) : This protocol is used to offer ISO presentation services on top of TCP/IP based protocol stacks.

NetWare Core Protocol (NCP) : NCP is a Novell client server model protocol that is designed especially for Local Area Network (LAN). It is capable to perform several functions like as file/print-sharing, clock synchronization, remote processing and messaging.

Network Data Representation (NDR) : NDR is an data encoding standard, and it is implement in the Distributed Computing Environment (DCE).

Telnet (Telecommunication Network) : Telnet protocol was introduced in 1969, and it offers the command line interface for making communication along with remote device or server .

Tox : The Tox protocol is sometimes regarded as part of both the presentation and application layer , and it is used for sending peer-to-peer instant-messaging as well as video calling.

eXternal Data Representation (XDR) : This protocol provides the description and encoding of entire data, and  it’s main goal is to transfer data in between dissimilar computer architecture.

25 Packet Assembler/Disassembler Protocol (PAD) : Main objective of this protocol is to obtain all data from group of terminal and allots the data into X. 25 packets.

Presentation layer provides several services like as –

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption
• It helps to handle and maintain Syntax and Semantics of the message transmitted.
• Encoding data can be done as standard agreed like as String, double, date, and more.
• Standard Encoding can be done on wire.

Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model that is the lowest layer, where all application programmer consider data structure and presentation, beyond of simply sending the data into form of datagram otherwise packets in between the hosts.

Presentation layer is used various protocols like as:

Yes! In this article, already we have been explained many examples of presentation layer; you can check them.

Presentation layer has a responsibility for formatting, translation, and delivery of the information for getting to process otherwise display .

Now, i hope that you have completely learnt about what is presentation layer with its protocols, example, service ; involving with major functions of presentation Layer with ease. If this post is useful for you, then please share it along with your friends, family members or relatives over social media platforms like as Facebook, Instagram, Linked In, Twitter, and more.

Also Read: Data Link Layer: Protocols, Examples | Functions of Data Link Layer

If you have any experience, tips, tricks, or query regarding this issue? You can drop a comment!

Related Posts

Computer Network

• Operating Systems
• Computer Fundamentals
• Interview Q

Physical Layer

Data link layer, network layer, routing algorithm, transport layer, application layer, application protocols, network security.

Interview Questions

• Send your Feedback to [email protected]

Help Others, Please Share

Learn Latest Tutorials

Transact-SQL

Reinforcement Learning

R Programming

React Native

Python Design Patterns

Python Pillow

Python Turtle

Preparation

Verbal Ability

Company Questions

Trending Technologies

Artificial Intelligence

Cloud Computing

Data Science

Machine Learning

B.Tech / MCA

Data Structures

Operating System

Compiler Design

Computer Organization

Discrete Mathematics

Ethical Hacking

Computer Graphics

Software Engineering

Web Technology

Cyber Security

C Programming

Control System

Data Mining

Data Warehouse