sample of abstract in term paper

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• Resources Home 🏠
• Try SciSpace Copilot
• Search research papers
• Add Copilot Extension
• Try AI Detector
• Try Paraphraser
• Try Citation Generator
• April Papers
• June Papers
• July Papers

Abstract Writing: A Step-by-Step Guide With Tips & Examples

Table of Contents

Introduction

Abstracts of research papers have always played an essential role in describing your research concisely and clearly to researchers and editors of journals, enticing them to continue reading. However, with the widespread availability of scientific databases, the need to write a convincing abstract is more crucial now than during the time of paper-bound manuscripts.

Abstracts serve to "sell" your research and can be compared with your "executive outline" of a resume or, rather, a formal summary of the critical aspects of your work. Also, it can be the "gist" of your study. Since most educational research is done online, it's a sign that you have a shorter time for impressing your readers, and have more competition from other abstracts that are available to be read.

The APCI (Academic Publishing and Conferences International) articulates 12 issues or points considered during the final approval process for conferences & journals and emphasises the importance of writing an abstract that checks all these boxes (12 points). Since it's the only opportunity you have to captivate your readers, you must invest time and effort in creating an abstract that accurately reflects the critical points of your research.

With that in mind, let’s head over to understand and discover the core concept and guidelines to create a substantial abstract. Also, learn how to organise the ideas or plots into an effective abstract that will be awe-inspiring to the readers you want to reach.

What is Abstract? Definition and Overview

The word "Abstract' is derived from Latin abstractus meaning "drawn off." This etymological meaning also applies to art movements as well as music, like abstract expressionism. In this context, it refers to the revealing of the artist's intention.

Based on this, you can determine the meaning of an abstract: A condensed research summary. It must be self-contained and independent of the body of the research. However, it should outline the subject, the strategies used to study the problem, and the methods implemented to attain the outcomes. The specific elements of the study differ based on the area of study; however, together, it must be a succinct summary of the entire research paper.

Abstracts are typically written at the end of the paper, even though it serves as a prologue. In general, the abstract must be in a position to:

• Describe the paper.
• Identify the problem or the issue at hand.
• Explain to the reader the research process, the results you came up with, and what conclusion you've reached using these results.
• Include keywords to guide your strategy and the content.

Furthermore, the abstract you submit should not reflect upon any of  the following elements:

• Examine, analyse or defend the paper or your opinion.
• What you want to study, achieve or discover.
• Be redundant or irrelevant.

After reading an abstract, your audience should understand the reason - what the research was about in the first place, what the study has revealed and how it can be utilised or can be used to benefit others. You can understand the importance of abstract by knowing the fact that the abstract is the most frequently read portion of any research paper. In simpler terms, it should contain all the main points of the research paper.

What is the Purpose of an Abstract?

Abstracts are typically an essential requirement for research papers; however, it's not an obligation to preserve traditional reasons without any purpose. Abstracts allow readers to scan the text to determine whether it is relevant to their research or studies. The abstract allows other researchers to decide if your research paper can provide them with some additional information. A good abstract paves the interest of the audience to pore through your entire paper to find the content or context they're searching for.

Abstract writing is essential for indexing, as well. The Digital Repository of academic papers makes use of abstracts to index the entire content of academic research papers. Like meta descriptions in the regular Google outcomes, abstracts must include keywords that help researchers locate what they seek.

Types of Abstract

Informative and Descriptive are two kinds of abstracts often used in scientific writing.

A descriptive abstract gives readers an outline of the author's main points in their study. The reader can determine if they want to stick to the research work, based on their interest in the topic. An abstract that is descriptive is similar to the contents table of books, however, the format of an abstract depicts complete sentences encapsulated in one paragraph. It is unfortunate that the abstract can't be used as a substitute for reading a piece of writing because it's just an overview, which omits readers from getting an entire view. Also, it cannot be a way to fill in the gaps the reader may have after reading this kind of abstract since it does not contain crucial information needed to evaluate the article.

To conclude, a descriptive abstract is:

• A simple summary of the task, just summarises the work, but some researchers think it is much more of an outline
• Typically, the length is approximately 100 words. It is too short when compared to an informative abstract.
• A brief explanation but doesn't provide the reader with the complete information they need;
• An overview that omits conclusions and results

An informative abstract is a comprehensive outline of the research. There are times when people rely on the abstract as an information source. And the reason is why it is crucial to provide entire data of particular research. A well-written, informative abstract could be a good substitute for the remainder of the paper on its own.

A well-written abstract typically follows a particular style. The author begins by providing the identifying information, backed by citations and other identifiers of the papers. Then, the major elements are summarised to make the reader aware of the study. It is followed by the methodology and all-important findings from the study. The conclusion then presents study results and ends the abstract with a comprehensive summary.

In a nutshell, an informative abstract:

• Has a length that can vary, based on the subject, but is not longer than 300 words.
• Contains all the content-like methods and intentions
• Offers evidence and possible recommendations.

Informative Abstracts are more frequent than descriptive abstracts because of their extensive content and linkage to the topic specifically. You should select different types of abstracts to papers based on their length: informative abstracts for extended and more complex abstracts and descriptive ones for simpler and shorter research papers.

What are the Characteristics of a Good Abstract?

• A good abstract clearly defines the goals and purposes of the study.
• It should clearly describe the research methodology with a primary focus on data gathering, processing, and subsequent analysis.
• A good abstract should provide specific research findings.
• It presents the principal conclusions of the systematic study.
• It should be concise, clear, and relevant to the field of study.
• A well-designed abstract should be unifying and coherent.
• It is easy to grasp and free of technical jargon.
• It is written impartially and objectively.

What are the various sections of an ideal Abstract?

By now, you must have gained some concrete idea of the essential elements that your abstract needs to convey . Accordingly, the information is broken down into six key sections of the abstract, which include:

An Introduction or Background

Research methodology, objectives and goals, limitations.

Let's go over them in detail.

The introduction, also known as background, is the most concise part of your abstract. Ideally, it comprises a couple of sentences. Some researchers only write one sentence to introduce their abstract. The idea behind this is to guide readers through the key factors that led to your study.

It's understandable that this information might seem difficult to explain in a couple of sentences. For example, think about the following two questions like the background of your study:

• What is currently available about the subject with respect to the paper being discussed?
• What isn't understood about this issue? (This is the subject of your research)

While writing the abstract’s introduction, make sure that it is not lengthy. Because if it crosses the word limit, it may eat up the words meant to be used for providing other key information.

Research methodology is where you describe the theories and techniques you used in your research. It is recommended that you describe what you have done and the method you used to get your thorough investigation results. Certainly, it is the second-longest paragraph in the abstract.

In the research methodology section, it is essential to mention the kind of research you conducted; for instance, qualitative research or quantitative research (this will guide your research methodology too) . If you've conducted quantitative research, your abstract should contain information like the sample size, data collection method, sampling techniques, and duration of the study. Likewise, your abstract should reflect observational data, opinions, questionnaires (especially the non-numerical data) if you work on qualitative research.

The research objectives and goals speak about what you intend to accomplish with your research. The majority of research projects focus on the long-term effects of a project, and the goals focus on the immediate, short-term outcomes of the research. It is possible to summarise both in just multiple sentences.

In stating your objectives and goals, you give readers a picture of the scope of the study, its depth and the direction your research ultimately follows. Your readers can evaluate the results of your research against the goals and stated objectives to determine if you have achieved the goal of your research.

In the end, your readers are more attracted by the results you've obtained through your study. Therefore, you must take the time to explain each relevant result and explain how they impact your research. The results section exists as the longest in your abstract, and nothing should diminish its reach or quality.

One of the most important things you should adhere to is to spell out details and figures on the results of your research.

Instead of making a vague assertion such as, "We noticed that response rates varied greatly between respondents with high incomes and those with low incomes", Try these: "The response rate was higher for high-income respondents than those with lower incomes (59 30 percent vs. 30 percent in both cases; P<0.01)."

You're likely to encounter certain obstacles during your research. It could have been during data collection or even during conducting the sample . Whatever the issue, it's essential to inform your readers about them and their effects on the research.

Research limitations offer an opportunity to suggest further and deep research. If, for instance, you were forced to change for convenient sampling and snowball samples because of difficulties in reaching well-suited research participants, then you should mention this reason when you write your research abstract. In addition, a lack of prior studies on the subject could hinder your research.

Your conclusion should include the same number of sentences to wrap the abstract as the introduction. The majority of researchers offer an idea of the consequences of their research in this case.

Your conclusion should include three essential components:

• A significant take-home message.
• Corresponding important findings.
• The Interpretation.

Even though the conclusion of your abstract needs to be brief, it can have an enormous influence on the way that readers view your research. Therefore, make use of this section to reinforce the central message from your research. Be sure that your statements reflect the actual results and the methods you used to conduct your research.

Good Abstract Examples

Abstract example #1.

Children’s consumption behavior in response to food product placements in movies.

The abstract:

"Almost all research into the effects of brand placements on children has focused on the brand's attitudes or behavior intentions. Based on the significant differences between attitudes and behavioral intentions on one hand and actual behavior on the other hand, this study examines the impact of placements by brands on children's eating habits. Children aged 6-14 years old were shown an excerpt from the popular film Alvin and the Chipmunks and were shown places for the item Cheese Balls. Three different versions were developed with no placements, one with moderately frequent placements and the third with the highest frequency of placement. The results revealed that exposure to high-frequency places had a profound effect on snack consumption, however, there was no impact on consumer attitudes towards brands or products. The effects were not dependent on the age of the children. These findings are of major importance to researchers studying consumer behavior as well as nutrition experts as well as policy regulators."

Abstract Example #2

Social comparisons on social media: The impact of Facebook on young women’s body image concerns and mood. The abstract:

"The research conducted in this study investigated the effects of Facebook use on women's moods and body image if the effects are different from an internet-based fashion journal and if the appearance comparison tendencies moderate one or more of these effects. Participants who were female ( N = 112) were randomly allocated to spend 10 minutes exploring their Facebook account or a magazine's website or an appearance neutral control website prior to completing state assessments of body dissatisfaction, mood, and differences in appearance (weight-related and facial hair, face, and skin). Participants also completed a test of the tendency to compare appearances. The participants who used Facebook were reported to be more depressed than those who stayed on the control site. In addition, women who have the tendency to compare appearances reported more facial, hair and skin-related issues following Facebook exposure than when they were exposed to the control site. Due to its popularity it is imperative to conduct more research to understand the effect that Facebook affects the way people view themselves."

Abstract Example #3

The Relationship Between Cell Phone Use and Academic Performance in a Sample of U.S. College Students

"The cellphone is always present on campuses of colleges and is often utilised in situations in which learning takes place. The study examined the connection between the use of cell phones and the actual grades point average (GPA) after adjusting for predictors that are known to be a factor. In the end 536 students in the undergraduate program from 82 self-reported majors of an enormous, public institution were studied. Hierarchical analysis ( R 2 = .449) showed that use of mobile phones is significantly ( p < .001) and negative (b equal to -.164) connected to the actual college GPA, after taking into account factors such as demographics, self-efficacy in self-regulated learning, self-efficacy to improve academic performance, and the actual high school GPA that were all important predictors ( p < .05). Therefore, after adjusting for other known predictors increasing cell phone usage was associated with lower academic performance. While more research is required to determine the mechanisms behind these results, they suggest the need to educate teachers and students to the possible academic risks that are associated with high-frequency mobile phone usage."

Quick tips on writing a good abstract

There exists a common dilemma among early age researchers whether to write the abstract at first or last? However, it's recommended to compose your abstract when you've completed the research since you'll have all the information to give to your readers. You can, however, write a draft at the beginning of your research and add in any gaps later.

If you find abstract writing a herculean task, here are the few tips to help you with it:

1. Always develop a framework to support your abstract

Before writing, ensure you create a clear outline for your abstract. Divide it into sections and draw the primary and supporting elements in each one. You can include keywords and a few sentences that convey the essence of your message.

2. Review Other Abstracts

Abstracts are among the most frequently used research documents, and thousands of them were written in the past. Therefore, prior to writing yours, take a look at some examples from other abstracts. There are plenty of examples of abstracts for dissertations in the dissertation and thesis databases.

3. Avoid Jargon To the Maximum

When you write your abstract, focus on simplicity over formality. You should  write in simple language, and avoid excessive filler words or ambiguous sentences. Keep in mind that your abstract must be readable to those who aren't acquainted with your subject.

4. Focus on Your Research

It's a given fact that the abstract you write should be about your research and the findings you've made. It is not the right time to mention secondary and primary data sources unless it's absolutely required.

Conclusion: How to Structure an Interesting Abstract?

Abstracts are a short outline of your essay. However, it's among the most important, if not the most important. The process of writing an abstract is not straightforward. A few early-age researchers tend to begin by writing it, thinking they are doing it to "tease" the next step (the document itself). However, it is better to treat it as a spoiler.

The simple, concise style of the abstract lends itself to a well-written and well-investigated study. If your research paper doesn't provide definitive results, or the goal of your research is questioned, so will the abstract. Thus, only write your abstract after witnessing your findings and put your findings in the context of a larger scenario.

The process of writing an abstract can be daunting, but with these guidelines, you will succeed. The most efficient method of writing an excellent abstract is to centre the primary points of your abstract, including the research question and goals methods, as well as key results.

Interested in learning more about dedicated research solutions? Go to the SciSpace product page to find out how our suite of products can help you simplify your research workflows so you can focus on advancing science.

The best-in-class solution is equipped with features such as literature search and discovery, profile management, research writing and formatting, and so much more.

But before you go,

You might also like.

Consensus GPT vs. SciSpace GPT: Choose the Best GPT for Research

Literature Review and Theoretical Framework: Understanding the Differences

Types of Essays in Academic Writing - Quick Guide (2024)

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

When you choose to publish with PLOS, your research makes an impact. Make your work accessible to all, without restrictions, and accelerate scientific discovery with options like preprints and published peer review that make your work more Open.

• PLOS Biology
• PLOS Climate
• PLOS Complex Systems
• PLOS Computational Biology
• PLOS Digital Health
• PLOS Genetics
• PLOS Global Public Health
• PLOS Medicine
• PLOS Mental Health
• PLOS Neglected Tropical Diseases
• PLOS Pathogens
• PLOS Sustainability and Transformation
• PLOS Collections
• How to Write an Abstract

Expedite peer review, increase search-ability, and set the tone for your study

The abstract is your chance to let your readers know what they can expect from your article. Learn how to write a clear, and concise abstract that will keep your audience reading.

How your abstract impacts editorial evaluation and future readership

After the title , the abstract is the second-most-read part of your article. A good abstract can help to expedite peer review and, if your article is accepted for publication, it’s an important tool for readers to find and evaluate your work. Editors use your abstract when they first assess your article. Prospective reviewers see it when they decide whether to accept an invitation to review. Once published, the abstract gets indexed in PubMed and Google Scholar , as well as library systems and other popular databases. Like the title, your abstract influences keyword search results. Readers will use it to decide whether to read the rest of your article. Other researchers will use it to evaluate your work for inclusion in systematic reviews and meta-analysis. It should be a concise standalone piece that accurately represents your research. 

What to include in an abstract

The main challenge you’ll face when writing your abstract is keeping it concise AND fitting in all the information you need. Depending on your subject area the journal may require a structured abstract following specific headings. A structured abstract helps your readers understand your study more easily. If your journal doesn’t require a structured abstract it’s still a good idea to follow a similar format, just present the abstract as one paragraph without headings. 

Background or Introduction – What is currently known? Start with a brief, 2 or 3 sentence, introduction to the research area. 

Objectives or Aims – What is the study and why did you do it? Clearly state the research question you’re trying to answer.

Methods – What did you do? Explain what you did and how you did it. Include important information about your methods, but avoid the low-level specifics. Some disciplines have specific requirements for abstract methods. 

• CONSORT for randomized trials.
• STROBE for observational studies
• PRISMA for systematic reviews and meta-analyses

Results – What did you find? Briefly give the key findings of your study. Include key numeric data (including confidence intervals or p values), where possible.

Conclusions – What did you conclude? Tell the reader why your findings matter, and what this could mean for the ‘bigger picture’ of this area of research. 

Writing tips

The main challenge you may find when writing your abstract is keeping it concise AND convering all the information you need to.

• Keep it concise and to the point. Most journals have a maximum word count, so check guidelines before you write the abstract to save time editing it later.
• Write for your audience. Are they specialists in your specific field? Are they cross-disciplinary? Are they non-specialists? If you’re writing for a general audience, or your research could be of interest to the public keep your language as straightforward as possible. If you’re writing in English, do remember that not all of your readers will necessarily be native English speakers.
• Focus on key results, conclusions and take home messages.
• Write your paper first, then create the abstract as a summary.
• Check the journal requirements before you write your abstract, eg. required subheadings.
• Include keywords or phrases to help readers search for your work in indexing databases like PubMed or Google Scholar.
• Double and triple check your abstract for spelling and grammar errors. These kind of errors can give potential reviewers the impression that your research isn’t sound, and can make it easier to find reviewers who accept the invitation to review your manuscript. Your abstract should be a taste of what is to come in the rest of your article.

Don’t

• Sensationalize your research.
• Speculate about where this research might lead in the future.
• Use abbreviations or acronyms (unless absolutely necessary or unless they’re widely known, eg. DNA).
• Repeat yourself unnecessarily, eg. “Methods: We used X technique. Results: Using X technique, we found…”
• Contradict anything in the rest of your manuscript.
• Include content that isn’t also covered in the main manuscript.
• Include citations or references.

Tip: How to edit your work

Editing is challenging, especially if you are acting as both a writer and an editor. Read our guidelines for advice on how to refine your work, including useful tips for setting your intentions, re-review, and consultation with colleagues.

• How to Write a Great Title
• How to Write Your Methods
• How to Report Statistics
• How to Write Discussions and Conclusions
• How to Edit Your Work

The contents of the Peer Review Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

The contents of the Writing Center are also available as a live, interactive training session, complete with slides, talking points, and activities. …

There’s a lot to consider when deciding where to submit your work. Learn how to choose a journal that will help your study reach its audience, while reflecting your values as a researcher…

Reference management. Clean and simple.

How to write an abstract

What is an abstract?

General format of an abstract, the content of an abstract, abstract example, abstract style guides, frequently asked questions about writing an abstract, related articles.

An abstract is a summary of the main contents of a paper.

The abstract is the first glimpse that readers get of the content of a research paper. It can influence the popularity of a paper, as a well-written one will attract readers, and a poorly-written one will drive them away.

➡️ Different types of papers may require distinct abstract styles. Visit our guide on the different types of research papers to learn more.

Tip: Always wait until you’ve written your entire paper before you write the abstract.

Before you actually start writing an abstract, make sure to follow these steps:

• Read other papers : find papers with similar topics, or similar methodologies, simply to have an idea of how others have written their abstracts. Notice which points they decided to include, and how in depth they described them.
• Double check the journal requirements : always make sure to review the journal guidelines to format your paper accordingly. Usually, they also specify abstract's formats.
• Write the abstract after you finish writing the paper : you can only write an abstract once you finish writing the whole paper. This way you can include all important aspects, such as scope, methodology, and conclusion.

➡️ Read more about  what is a research methodology?

The general format of an abstract includes the following features:

• Between 150-300 words .
• An independent page , after the title page and before the table of contents.
• Concise summary including the aim of the research, methodology , and conclusion .
• Keywords describing the content.

As mentioned before, an abstract is a text that summarizes the main points of a research. Here is a break down of each element that should be included in an abstract:

• Purpose : every abstract should start by describing the main purpose or aim of the research.
• Methods : as a second point, the methodology carried out should be explained.
• Results : then, a concise summary of the results should be included.
• Conclusion : finally, a short outline of the general outcome of the research should be given.
• Keywords : along with the abstract, specific words and phrases related to the topics discussed in the research should be added. These words are usually around five, but the number can vary depending on the journal's guidelines.

This abstract, taken from ScienceDirect , illustrates the ideal structure of an abstract. It has 155 words, it's concise, and it clearly shows the division of elements necessary to write a successful abstract.

This paper explores the implicit assumption in the growing body of literature that social media usage is fundamentally different in business-to-business (B2B) companies than in the extant business-to-consumer (B2C) literature. Sashi's (2012) customer engagement cycle is utilized to compare organizational practices in relation to social media marketing in B2B, B2C, Mixed B2B/B2C and B2B2C business models. Utilizing 449 responses to an exploratory panel based survey instrument, we clearly identify differences in social media usage and its perceived importance as a communications channel. In particular we identify distinct differences in the relationship between social media importance and the perceived effectiveness of social media marketing across business models. Our results indicate that B2B social media usage is distinct from B2C, Mixed and B2B2C business model approaches. Specifically B2B organizational members perceive social media to have a lower overall effectiveness as a channel and identify it as less important for relationship oriented usage than other business models.

The exact format of an abstract depends on the citation style you implement. Whether it’s a well-known style (like APA, IEEE, etc.) or a journal's style, each format has its own guidelines, so make sure you know which style you are using before writing your abstract.

APA is one of the most commonly used styles to format an abstract. Therefore, we created a guide with exact instructions on how to write an abstract in APA style, and a template to download:

📕 APA abstract page: format and template

Additionally, you will find below an IEEE and ASA abstract guide by Purdue Online Writing Lab :

📗 IEEE General Format - Abstract

📘 ASA Manuscript Formatting - Abstract

No. You should always write an abstract once you finish writing the whole paper. This way you can include all important aspects of the paper, such as scope, methodology, and conclusion.

The length of an abstract depends on the formatting style of the paper. For example, APA style calls for 150 to 250 words. Generally, you need between 150-300 words.

No. An abstract has an independent section after the title page and before the table of contents, and should not be included in the table of contents.

Take a look at APA abstract page: format and template for exact details on how to format an abstract in APA style.

You can access any paper through Google Scholar or any other search engine; pick a paper and read the abstract. Abstracts are always freely available to read.

Get science-backed answers as you write with Paperpal's Research feature

How to Write an Abstract in Research Papers (with Examples)

An abstract in research papers is a keyword-rich summary usually not exceeding 200-350 words. It can be considered the “face” of research papers because it creates an initial impression on the readers. While searching databases (such as PubMed) for research papers, a title is usually the first selection criterion for readers. If the title matches their search criteria, then the readers read the abstract, which sets the tone of the paper. Titles and abstracts are often the only freely available parts of research papers on journal websites. The pdf versions of full articles need to be purchased. Journal reviewers are often provided with only the title and abstract before they agree to review the complete paper. [ 1]  

Abstracts in research papers provide readers with a quick insight into what the paper is about to help them decide whether they want to read it further or not. Abstracts are the main selling points of articles and therefore should be carefully drafted, accurately highlighting the important aspects. [ 2]  

This article will help you identify the important components and provide tips on how to write an abstract in research papers effectively

What is an Abstract?  

An abstract in research papers can be defined as a synopsis of the paper. It should be clear, direct, self-contained, specific, unbiased, and concise. These summaries are published along with the complete research paper and are also submitted to conferences for consideration for presentation.  

Abstracts are of four types and journals can follow any of these formats: [ 2]  

• Structured  
• Unstructured  
• Descriptive  
• Informative  

Structured abstracts are used by most journals because they are more organized and have clear sections, usually including introduction/background; objective; design, settings, and participants (or materials and methods); outcomes and measures; results; and conclusion. These headings may differ based on the journal or the type of paper. Clinical trial abstracts should include the essential items mentioned in the CONSORT (Consolidated Standards Of Reporting Trials) guidelines.  

Figure 1. Structured abstract example [3] 

Unstructured abstracts are common in social science, humanities, and physical science journals. They usually have one paragraph and no specific structure or subheadings. These abstracts are commonly used for research papers that don’t report original work and therefore have a more flexible and narrative style.  

Figure 2. Unstructured abstract example [3] 

Descriptive abstracts are short (75–150 words) and provide an outline with only the most important points of research papers. They are used for shorter articles such as case reports, reviews, and opinions where space is at a premium, and rarely for original investigations. These abstracts don’t present the results but mainly list the topics covered.  

Here’s a sample abstract . [ 4]  

“Design of a Radio-Based System for Distribution Automation”  

A new survey by the Maryland Public Utilities Commission suggests that utilities have not effectively explained to consumers the benefits of smart meters. The two-year study of 86,000 consumers concludes that the long-term benefits of smart meters will not be realized until consumers understand the benefits of shifting some of their power usage to off-peak hours in response to the data they receive from their meters. The study presents recommendations for utilities and municipal governments to improve customer understanding of how to use the smart meters effectively.  

Keywords: smart meters, distribution systems, load, customer attitudes, power consumption, utilities  

Informative abstracts (structured or unstructured) give a complete detailed summary, including the main results, of the research paper and may or may not have subsections.   

Figure 3. Informative abstract example [5] 

Purpose of Abstracts in Research    

Abstracts in research have two main purposes—selection and indexing. [ 6,7]  

• Selection : Abstracts allow interested readers to quickly decide the relevance of a paper to gauge if they should read it completely.   
• Indexing : Most academic journal databases accessed through libraries enable you to search abstracts, allowing for quick retrieval of relevant articles and avoiding unnecessary search results. Therefore, abstracts must necessarily include the keywords that researchers may use to search for articles.  

Thus, a well-written, keyword-rich abstract can p ique readers’ interest and curiosity and help them decide whether they want to read the complete paper. It can also direct readers to articles of potential clinical and research interest during an online search.  

Contents of Abstracts in Research  

Abstracts in research papers summarize the main points of an article and are broadly categorized into four or five sections. Here are some details on how to write an abstract .   

Introduction/Background and/or Objectives  

This section should provide the following information:  

• What is already known about the subject?  
• What is not known about the subject or what does the study aim to investigate?  

The hypothesis or research question and objectives should be mentioned here. The Background sets the context for the rest of the paper and its length should be short so that the word count could be saved for the Results or other information directly pertaining to the study. The objective should be written in present or past simple tense.  

Examples:  

The antidepressant efficacy of desvenlafaxine (DV) has been established in 8-week, randomized controlled trials. The present study examined the continued efficacy of DV across 6 months of maintenance treatment . [ 1]  

Objective: To describe gastric and breast cancer risk estimates for individuals with CDH1 variants.  

Design, Setting, and Participants (or Materials and Methods)  

This section should provide information on the processes used and should be written in past simple tense because the process is already completed.  

A few important questions to be answered include:  

• What was the research design and setting?  
• What was the sample size and how were the participants sampled?  
• What treatments did the participants receive?  
• What were the data collection and data analysis dates?  
• What was the primary outcome measure?  

Hazard ratios (HRs) were estimated for each cancer type and used to calculate cumulative risks and risks per decade of life up to age 80 years.  

This section, written in either present or past simple tense, should be the longest and should describe the main findings of the study. Here’s an example of how descriptive the sentences should be:  

Avoid: Response rates differed significantly between diabetic and nondiabetic patients.  

Better: The response rate was higher in nondiabetic than in diabetic patients (49% vs 30%, respectively; P<0.01).  

This section should include the following information:  

• Total number of patients (included, excluded [exclusion criteria])  
• Primary and secondary outcomes, expressed in words, and supported by numerical data  
• Data on adverse outcomes  

Example: [ 8]  

In total, 10.9% of students were reported to have favorable study skills. The minimum score was found for preparation for examination domain. Also, a significantly positive correlation was observed between students’ study skills and their Grade Point Average (GPA) of previous term (P=0.001, r=0.269) and satisfaction with study skills (P=0.001, r=0.493).  

Conclusions  

Here, authors should mention the importance of their findings and also the practical and theoretical implications, which would benefit readers referring to this paper for their own research. Present simple tense should be used here.  

Examples: [ 1,8]  

The 9.3% prevalence of bipolar spectrum disorders in students at an arts university is substantially higher than general population estimates. These findings strengthen the oft-expressed hypothesis linking creativity with affective psychopathology.  

The findings indicated that students’ study skills need to be improved. Given the significant relationship between study skills and GPA, as an index of academic achievement, and satisfaction, it is necessary to promote the students’ study skills. These skills are suggested to be reinforced, with more emphasis on weaker domains.  

When to Write an Abstract  

In addition to knowing how to write an abstract , you should also know when to write an abstract . It’s best to write abstracts once the paper is completed because this would make it easier for authors to extract relevant parts from every section.  

Abstracts are usually required for: [ 7]    

• submitting articles to journals  
• applying for research grants   
• writing book proposals  
• completing and submitting dissertations  
• submitting proposals for conference papers  

Mostly, the author of the entire work writes the abstract (the first author, in works with multiple authors). However, there are professional abstracting services that hire writers to draft abstracts of other people’s work.   

How to Write an Abstract (Step-by-Step Process)  

Here are some key steps on how to write an abstract in research papers: [ 9]  

• Write the abstract after you’ve finished writing your paper.  
• Select the major objectives/hypotheses and conclusions from your Introduction and Conclusion sections.  
• Select key sentences from your Methods section.  
• Identify the major results from the Results section.  
• Paraphrase or re-write the sentences selected in steps 2, 3, and 4 in your own words into one or two paragraphs in the following sequence: Introduction/Objective, Methods, Results, and Conclusions. The headings may differ among journals, but the content remains the same.  
• Ensure that this draft does not contain: a.   new information that is not present in the paper b.   undefined abbreviations c.   a discussion of previous literature or reference citations d.   unnecessary details about the methods used  
• Remove all extra information and connect your sentences to ensure that the information flows well, preferably in the following order: purpose; basic study design, methodology and techniques used; major findings; summary of your interpretations, conclusions, and implications. Use section headings for structured abstracts.  
• Ensure consistency between the information presented in the abstract and the paper.  
• Check to see if the final abstract meets the guidelines of the target journal (word limit, type of abstract, recommended subheadings, etc.) and if all the required information has been included.  

Choosing Keywords for Abstracts  

Keywords [ 2] are the important and repeatedly used words and phrases in research papers and can help indexers and search engines find papers relevant to your requirements. Easy retrieval would help in reaching a wider audience and eventually gain more citations. In the fields of medicine and health, keywords should preferably be chosen from the Medical Subject Headings (MeSH) list of the US National Library of Medicine because they are used for indexing. These keywords need to be different from the words in the main title (automatically used for indexing) but can be variants of the terms/phrases used in the title, abstract, and the main text. Keywords should represent the content of your manuscript and be specific to your subject area.  

Basic tips for authors [ 10,11]  

• Read through your paper and highlight key terms or phrases that are most relevant and frequently used in your field, to ensure familiarity.  
• Several journals provide instructions about the length (eg, 3 words in a keyword) and maximum number of keywords allowed and other related rules. Create a list of keywords based on these instructions and include specific phrases containing 2 to 4 words. A longer string of words would yield generic results irrelevant to your field.  
• Use abbreviations, acronyms, and initializations if these would be more familiar.  
• Search with your keywords to ensure the results fit with your article and assess how helpful they would be to readers.  
• Narrow down your keywords to about five to ten, to ensure accuracy.  
• Finalize your list based on the maximum number allowed.  

  Few examples: [ 12]  

Important Tips for Writing an Abstract  

Here are a few tips on how to write an abstract to ensure that your abstract is complete, concise, and accurate. [ 1,2]  

• Write the abstract last.  
• Follow journal-specific formatting guidelines or Instructions to Authors strictly to ensure acceptance for publication.  
• Proofread the final draft meticulously to avoid grammatical or typographical errors.  
• Ensure that the terms or data mentioned in the abstract are consistent with the main text.  
• Include appropriate keywords at the end.

Do not include:  

• New information  
• Text citations to references  
• Citations to tables and figures  
• Generic statements  
• Abbreviations unless necessary, like a trial or study name  

Key Takeaways    

Here’s a quick snapshot of all the important aspects of how to write an abstract . [2]

• An abstract in research is a summary of the paper and describes only the main aspects. Typically, abstracts are about 200-350 words long.  
• Abstracts are of four types—structured, unstructured, descriptive, and informative.  
• Abstracts should be simple, clear, concise, independent, and unbiased (present both favorable and adverse outcomes).  
• They should adhere to the prescribed journal format, including word limits, section headings, number of keywords, fonts used, etc.  
• The terminology should be consistent with the main text.   
• Although the section heading names may differ for journals, every abstract should include a background and objective, analysis methods, primary results, and conclusions.  
• Nonstandard abbreviations, references, and URLs shouldn’t be included.  
• Only relevant and specific keywords should be used to ensure focused searches and higher citation frequency.  
• Abstracts should be written last after completing the main paper.  

Frequently Asked Questions   

Q1. Do all journals have different guidelines for abstracts?  

A1. Yes, all journals have their own specific guidelines for writing abstracts; a few examples are given in the following table. [ 6,13,14,15]  

Q2. What are the common mistakes to avoid when writing an abstract?  

A2. Listed below are a few mistakes that authors may make inadvertently while writing abstracts.  

• Copying sentences from the paper verbatim  

An abstract is a summary, which should be created by paraphrasing your own work or writing in your own words. Extracting sentences from every section and combining them into one paragraph cannot be considered summarizing.  

• Not adhering to the formatting guidelines  

Journals have special instructions for writing abstracts, such as word limits and section headings. These should be followed strictly to avoid rejections.  

• Not including the right amount of details in every section  

Both too little and too much information could discourage readers. For instance, if the Background has very little information, the readers may not get sufficient context to appreciate your research. Similarly, incomplete information in the Methods and a text-heavy Results section without supporting numerical data may affect the credibility of your research.  

• Including citations, standard abbreviations, and detailed measurements  

Typically, abstracts shouldn’t include these elements—citations, URLs, and abbreviations. Only nonstandard abbreviations are allowed or those that would be more familiar to readers than the expansions.  

• Including new information  

Abstracts should strictly include only the same information mentioned in the main text. Any new information should first be added to the text and then to the abstract only if necessary or if permitted by the word limit.  

• Not including keywords  

Keywords are essential for indexing and searching and should be included to increase the frequency of retrieval and citation.  

Q3. What is the difference between abstracts in research papers and conference abstracts? [16]  

A3. The table summarizes the main differences between research and conference abstracts.  

  Thus, abstracts are essential “trailers” that can market your research to a wide audience. The better and more complete the abstract the more are the chances of your paper being read and cited. By following our checklist and ensuring that all key elements are included, you can create a well-structured abstract that summarizes your paper accurately.  

References  

• Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry . 2011; 53(2):172-175. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/  
• Tullu MS. Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key. 2019; 13(Suppl 1): S12-S17. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6398294/  
• Zawia J. Writing an Academic Paper? Get to know Abstracts vs. Structured Abstracts. Medium. Published October 16, 2023. Accessed June 16, 2024. https://medium.com/@jamala.zawia/writing-an-academic-paper-get-to-know-abstracts-vs-structured-abstracts-11ed86888367  
• Markel M and Selber S. Technical Communication, 12 th edition. 2018; pp. 482. Bedford/St Martin’s.  
• Abstracts. Arkansas State University. Accessed June 17, 2024. https://www.astate.edu/a/global-initiatives/online/a-state-online-services/online-writing-center/resources/How%20to%20Write%20an%20Abstract1.pdf  
• AMA Manual of Style. 11 th edition. Oxford University Press.  
• Writing an Abstract. The University of Melbourne. Accessed June 16, 2024. https://services.unimelb.edu.au/__data/assets/pdf_file/0007/471274/Writing_an_Abstract_Update_051112.pdf  
• 10 Good Abstract Examples that will Kickstart Your Brain. Kibin Essay Writing Blog. Published April 5, 2017. Accessed June 17, 2024. https://www.kibin.com/essay-writing-blog/10-good-abstract-examples/  
• A 10-step guide to make your research paper abstract more effective. Editage Insights. Published October 16, 2013. Accessed June 17, 2024. https://www.editage.com/insights/a-10-step-guide-to-make-your-research-paper-abstract-more-effective  
• Using keywords to write your title and abstract. Taylor & Francis Author Services. Accessed June 15, 2024. https://authorservices.taylorandfrancis.com/publishing-your-research/writing-your-paper/using-keywords-to-write-title-and-abstract/  
• How to choose and use keywords in research papers. Paperpal by Editage blog. Published March 10, 2023. Accessed June 17, 2024. https://paperpal.com/blog/researcher-resources/phd-pointers/how-to-choose-and-use-keywords-in-research-papers  
• Title, abstract and keywords. Springer. Accessed June 16, 2024. https://www.springer.com/it/authors-editors/authorandreviewertutorials/writing-a-journal-manuscript/title-abstract-and-keywords/10285522  
• Abstract and keywords guide. APA Style, 7 th edition. Accessed June 18, 2024. https://apastyle.apa.org/instructional-aids/abstract-keywords-guide.pdf  
• Abstract guidelines. American Society for Microbiology. Accessed June 18, 2024. https://asm.org/events/asm-microbe/present/abstract-guidelines  
• Guidelines for conference abstracts. The Lancet. Accessed June 16, 2024. https://www.thelancet.com/pb/assets/raw/Lancet/pdfs/Abstract_Guidelines_2013.pdf  
• Is a conference abstract the same as a paper abstract? Global Conference Alliance, Inc. Accessed June 18, 2024. https://globalconference.ca/is-a-conference-abstract-the-same-as-a-paper-abstract/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• What are Journal Guidelines on Using Generative AI Tools
• How to Write a High-Quality Conference Paper

How to Write Dissertation Acknowledgements?

• How to Write the First Draft of a Research Paper with Paperpal? 

Top 7 AI Tools for Research 2024

You may also like, how to write an academic paragraph (step-by-step guide), maintaining academic integrity with paperpal’s generative ai writing..., research funding basics: what should a grant proposal..., how to structure an essay, leveraging generative ai to enhance student understanding of..., how to write a good hook for essays,..., addressing peer review feedback and mastering manuscript revisions..., how paperpal can boost comprehension and foster interdisciplinary..., what is the importance of a concept paper....

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write an Abstract for a Research Paper | Examples

What is a research paper abstract?

Research paper abstracts summarize your study quickly and succinctly to journal editors and researchers and prompt them to read further. But with the ubiquity of online publication databases, writing a compelling abstract is even more important today than it was in the days of bound paper manuscripts.

Abstracts exist to “sell”  your work, and they could thus be compared to the “executive summary” of a business resume: an official briefing on what is most important about your research. Or the “gist” of your research. With the majority of academic transactions being conducted online, this means that you have even less time to impress readers–and increased competition in terms of other abstracts out there to read.

The APCI (Academic Publishing and Conferences International) notes that there are  12 questions or “points” considered in the selection process  for journals and conferences and stresses the importance of having an abstract that ticks all of these boxes. Because it is often the ONLY chance you have to convince readers to keep reading, it is important that you spend time and energy crafting an abstract that faithfully represents the central parts of your study and captivates your audience.

With that in mind, follow these suggestions when structuring and writing your abstract, and learn how exactly to put these ideas into a solid abstract that will captivate your target readers.

Before Writing Your Abstract

How long should an abstract be.

All abstracts are written with the same essential objective: to give a summary of your study. But there are two basic styles of abstract: descriptive and informative . Here is a brief delineation of the two:

Of the two types of abstracts, informative abstracts are much more common, and they are widely used for submission to journals and conferences. Informative abstracts apply to lengthier and more technical research and are common in the sciences, engineering, and psychology, while descriptive abstracts are more likely used in humanities and social science papers. The best method of determining which abstract type you need to use is to follow the instructions for journal submissions and to read as many other published articles in those journals as possible.

Research Abstract Guidelines and Requirements

As any article about research writing will tell you, authors must always closely follow the specific guidelines and requirements indicated in the Guide for Authors section of their target journal’s website. The same kind of adherence to conventions should be applied to journal publications, for consideration at a conference, and even when completing a class assignment.

Each publisher has particular demands when it comes to formatting and structure. Here are some common questions addressed in the journal guidelines:

• Is there a maximum or minimum word/character length?
• What are the style and formatting requirements?
• What is the appropriate abstract type?
• Are there any specific content or organization rules that apply?

There are of course other rules to consider when composing a research paper abstract. But if you follow the stated rules the first time you submit your manuscript, you can avoid your work being thrown in the “circular file” right off the bat.

Identify Your Target Readership

The main purpose of your abstract is to lead researchers to the full text of your research paper. In scientific journals, abstracts let readers decide whether the research discussed is relevant to their own interests or study. Abstracts also help readers understand your main argument quickly. Consider these questions as you write your abstract:

• Are other academics in your field the main target of your study?
• Will your study perhaps be useful to members of the general public?
• Do your study results include the wider implications presented in the abstract?

Outlining and Writing Your Abstract

What to include in an abstract.

Just as your  research paper title  should cover as much ground as possible in a few short words, your abstract must cover  all  parts of your study in order to fully explain your paper and research. Because it must accomplish this task in the space of only a few hundred words, it is important not to include ambiguous references or phrases that will confuse the reader or mislead them about the content and objectives of your research. Follow these  dos  and  don’ts  when it comes to what kind of writing to include:

• Avoid acronyms or abbreviations since these will need to be explained in order to make sense to the reader, which takes up valuable abstract space. Instead, explain these terms in the Introduction section of the main text.
• Only use references to people or other works if they are well-known. Otherwise, avoid referencing anything outside of your study in the abstract.
• Never include tables, figures, sources, or long quotations in your abstract; you will have plenty of time to present and refer to these in the body of your paper.

Use keywords in your abstract to focus your topic

A vital search tool is the research paper keywords section, which lists the most relevant terms directly underneath the abstract. Think of these keywords as the “tubes” that readers will seek and enter—via queries on databases and search engines—to ultimately land at their destination, which is your paper. Your abstract keywords should thus be words that are commonly used in searches but should also be highly relevant to your work and found in the text of your abstract. Include 5 to 10 important words or short phrases central to your research in both the abstract and the keywords section.

For example, if you are writing a paper on the prevalence of obesity among lower classes that crosses international boundaries, you should include terms like “obesity,” “prevalence,” “international,” “lower classes,” and “cross-cultural.” These are terms that should net a wide array of people interested in your topic of study. Look at our nine rules for choosing keywords for your research paper if you need more input on this.

Research Paper Abstract Structure

As mentioned above, the abstract (especially the informative abstract) acts as a surrogate or synopsis of your research paper, doing almost as much work as the thousands of words that follow it in the body of the main text. In the hard sciences and most social sciences, the abstract includes the following sections and organizational schema.

Each section is quite compact—only a single sentence or two, although there is room for expansion if one element or statement is particularly interesting or compelling. As the abstract is almost always one long paragraph, the individual sections should naturally merge into one another to create a holistic effect. Use the following as a checklist to ensure that you have included all of the necessary content in your abstract.

1) Identify your purpose and motivation

So your research is about rabies in Brazilian squirrels. Why is this important? You should start your abstract by explaining why people should care about this study—why is it significant to your field and perhaps to the wider world? And what is the exact purpose of your study; what are you trying to achieve? Start by answering the following questions:

• What made you decide to do this study or project?
• Why is this study important to your field or to the lay reader?
• Why should someone read your entire article?

In summary, the first section of your abstract should include the importance of the research and its impact on related research fields or on the wider scientific domain.

2) Explain the research problem you are addressing

Stating the research problem that your study addresses is the corollary to why your specific study is important and necessary. For instance, even if the issue of “rabies in Brazilian squirrels” is important, what is the problem—the “missing piece of the puzzle”—that your study helps resolve?

You can combine the problem with the motivation section, but from a perspective of organization and clarity, it is best to separate the two. Here are some precise questions to address:

• What is your research trying to better understand or what problem is it trying to solve?
• What is the scope of your study—does it try to explain something general or specific?
• What is your central claim or argument?

3) Discuss your research approach

Your specific study approach is detailed in the Methods and Materials section .  You have already established the importance of the research, your motivation for studying this issue, and the specific problem your paper addresses. Now you need to discuss  how  you solved or made progress on this problem—how you conducted your research. If your study includes your own work or that of your team, describe that here. If in your paper you reviewed the work of others, explain this here. Did you use analytic models? A simulation? A double-blind study? A case study? You are basically showing the reader the internal engine of your research machine and how it functioned in the study. Be sure to:

• Detail your research—include methods/type of the study, your variables, and the extent of the work
• Briefly present evidence to support your claim
• Highlight your most important sources

4) Briefly summarize your results

Here you will give an overview of the outcome of your study. Avoid using too many vague qualitative terms (e.g, “very,” “small,” or “tremendous”) and try to use at least some quantitative terms (i.e., percentages, figures, numbers). Save your qualitative language for the conclusion statement. Answer questions like these:

• What did your study yield in concrete terms (e.g., trends, figures, correlation between phenomena)?
• How did your results compare to your hypothesis? Was the study successful?
• Where there any highly unexpected outcomes or were they all largely predicted?

5) State your conclusion

In the last section of your abstract, you will give a statement about the implications and  limitations of the study . Be sure to connect this statement closely to your results and not the area of study in general. Are the results of this study going to shake up the scientific world? Will they impact how people see “Brazilian squirrels”? Or are the implications minor? Try not to boast about your study or present its impact as  too  far-reaching, as researchers and journals will tend to be skeptical of bold claims in scientific papers. Answer one of these questions:

• What are the exact effects of these results on my field? On the wider world?
• What other kind of study would yield further solutions to problems?
• What other information is needed to expand knowledge in this area?

After Completing the First Draft of Your Abstract

Revise your abstract.

The abstract, like any piece of academic writing, should be revised before being considered complete. Check it for  grammatical and spelling errors  and make sure it is formatted properly.

Get feedback from a peer

Getting a fresh set of eyes to review your abstract is a great way to find out whether you’ve summarized your research well. Find a reader who understands research papers but is not an expert in this field or is not affiliated with your study. Ask your reader to summarize what your study is about (including all key points of each section). This should tell you if you have communicated your key points clearly.

In addition to research peers, consider consulting with a professor or even a specialist or generalist writing center consultant about your abstract. Use any resource that helps you see your work from another perspective.

Consider getting professional editing and proofreading

While peer feedback is quite important to ensure the effectiveness of your abstract content, it may be a good idea to find an academic editor  to fix mistakes in grammar, spelling, mechanics, style, or formatting. The presence of basic errors in the abstract may not affect your content, but it might dissuade someone from reading your entire study. Wordvice provides English editing services that both correct objective errors and enhance the readability and impact of your work.

Additional Abstract Rules and Guidelines

Write your abstract after completing your paper.

Although the abstract goes at the beginning of your manuscript, it does not merely introduce your research topic (that is the job of the title), but rather summarizes your entire paper. Writing the abstract last will ensure that it is complete and consistent with the findings and statements in your paper.

Keep your content in the correct order

Both questions and answers should be organized in a standard and familiar way to make the content easier for readers to absorb. Ideally, it should mimic the overall format of your essay and the classic “introduction,” “body,” and “conclusion” form, even if the parts are not neatly divided as such.

Write the abstract from scratch

Because the abstract is a self-contained piece of writing viewed separately from the body of the paper, you should write it separately as well. Never copy and paste direct quotes from the paper and avoid paraphrasing sentences in the paper. Using new vocabulary and phrases will keep your abstract interesting and free of redundancies while conserving space.

Don’t include too many details in the abstract

Again, the density of your abstract makes it incompatible with including specific points other than possibly names or locations. You can make references to terms, but do not explain or define them in the abstract. Try to strike a balance between being specific to your study and presenting a relatively broad overview of your work.

Wordvice Resources

If you think your abstract is fine now but you need input on abstract writing or require English editing services (including paper editing ), then head over to the Wordvice academic resources page, where you will find many more articles, for example on writing the Results , Methods , and Discussion sections of your manuscript, on choosing a title for your paper , or on how to finalize your journal submission with a strong cover letter .    

• Privacy Policy

Home » Research Paper Abstract – Writing Guide and Examples

Research Paper Abstract – Writing Guide and Examples

Table of Contents

Research Paper Abstract

Research Paper Abstract is a brief summary of a research pape r that describes the study’s purpose, methods, findings, and conclusions . It is often the first section of the paper that readers encounter, and its purpose is to provide a concise and accurate overview of the paper’s content. The typical length of an abstract is usually around 150-250 words, and it should be written in a concise and clear manner.

Research Paper Abstract Structure

The structure of a research paper abstract usually includes the following elements:

• Background or Introduction: Briefly describe the problem or research question that the study addresses.
• Methods : Explain the methodology used to conduct the study, including the participants, materials, and procedures.
• Results : Summarize the main findings of the study, including statistical analyses and key outcomes.
• Conclusions : Discuss the implications of the study’s findings and their significance for the field, as well as any limitations or future directions for research.
• Keywords : List a few keywords that describe the main topics or themes of the research.

How to Write Research Paper Abstract

Here are the steps to follow when writing a research paper abstract:

• Start by reading your paper: Before you write an abstract, you should have a complete understanding of your paper. Read through the paper carefully, making sure you understand the purpose, methods, results, and conclusions.
• Identify the key components : Identify the key components of your paper, such as the research question, methods used, results obtained, and conclusion reached.
• Write a draft: Write a draft of your abstract, using concise and clear language. Make sure to include all the important information, but keep it short and to the point. A good rule of thumb is to keep your abstract between 150-250 words.
• Use clear and concise language : Use clear and concise language to explain the purpose of your study, the methods used, the results obtained, and the conclusions drawn.
• Emphasize your findings: Emphasize your findings in the abstract, highlighting the key results and the significance of your study.
• Revise and edit: Once you have a draft, revise and edit it to ensure that it is clear, concise, and free from errors.
• Check the formatting: Finally, check the formatting of your abstract to make sure it meets the requirements of the journal or conference where you plan to submit it.

Research Paper Abstract Examples

Research Paper Abstract Examples could be following:

Title : “The Effectiveness of Cognitive-Behavioral Therapy for Treating Anxiety Disorders: A Meta-Analysis”

Abstract : This meta-analysis examines the effectiveness of cognitive-behavioral therapy (CBT) in treating anxiety disorders. Through the analysis of 20 randomized controlled trials, we found that CBT is a highly effective treatment for anxiety disorders, with large effect sizes across a range of anxiety disorders, including generalized anxiety disorder, panic disorder, and social anxiety disorder. Our findings support the use of CBT as a first-line treatment for anxiety disorders and highlight the importance of further research to identify the mechanisms underlying its effectiveness.

Title : “Exploring the Role of Parental Involvement in Children’s Education: A Qualitative Study”

Abstract : This qualitative study explores the role of parental involvement in children’s education. Through in-depth interviews with 20 parents of children in elementary school, we found that parental involvement takes many forms, including volunteering in the classroom, helping with homework, and communicating with teachers. We also found that parental involvement is influenced by a range of factors, including parent and child characteristics, school culture, and socio-economic status. Our findings suggest that schools and educators should prioritize building strong partnerships with parents to support children’s academic success.

Title : “The Impact of Exercise on Cognitive Function in Older Adults: A Systematic Review and Meta-Analysis”

Abstract : This paper presents a systematic review and meta-analysis of the existing literature on the impact of exercise on cognitive function in older adults. Through the analysis of 25 randomized controlled trials, we found that exercise is associated with significant improvements in cognitive function, particularly in the domains of executive function and attention. Our findings highlight the potential of exercise as a non-pharmacological intervention to support cognitive health in older adults.

When to Write Research Paper Abstract

The abstract of a research paper should typically be written after you have completed the main body of the paper. This is because the abstract is intended to provide a brief summary of the key points and findings of the research, and you can’t do that until you have completed the research and written about it in detail.

Once you have completed your research paper, you can begin writing your abstract. It is important to remember that the abstract should be a concise summary of your research paper, and should be written in a way that is easy to understand for readers who may not have expertise in your specific area of research.

Purpose of Research Paper Abstract

The purpose of a research paper abstract is to provide a concise summary of the key points and findings of a research paper. It is typically a brief paragraph or two that appears at the beginning of the paper, before the introduction, and is intended to give readers a quick overview of the paper’s content.

The abstract should include a brief statement of the research problem, the methods used to investigate the problem, the key results and findings, and the main conclusions and implications of the research. It should be written in a clear and concise manner, avoiding jargon and technical language, and should be understandable to a broad audience.

The abstract serves as a way to quickly and easily communicate the main points of a research paper to potential readers, such as academics, researchers, and students, who may be looking for information on a particular topic. It can also help researchers determine whether a paper is relevant to their own research interests and whether they should read the full paper.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Paper Title – Writing Guide and Example

APA Research Paper Format – Example, Sample and...

Research Results Section – Writing Guide and...

Research Paper Introduction – Writing Guide and...

Research Paper Outline – Types, Example, Template

Scope of the Research – Writing Guide and...

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 416 other subscribers.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

Magnum Proofreading Services

• Jake Magnum
• Jan 2, 2021

Writing an Abstract for a Research Paper: Guidelines, Examples, and Templates

There are six steps to writing a standard abstract. (1) Begin with a broad statement about your topic. Then, (2) state the problem or knowledge gap related to this topic that your study explores. After that, (3) describe what specific aspect of this problem you investigated, and (4) briefly explain how you went about doing this. After that, (5) describe the most meaningful outcome(s) of your study. Finally, (6) close your abstract by explaining the broad implication(s) of your findings.

In this article, I present step-by-step guidelines for writing an abstract for an academic paper. These guidelines are fo llowed by an example of a full abstract that follows these guidelines and a few fill-in-the-blank templates that you can use to write your own abstract.

Guidelines for Writing an Abstract

The basic structure of an abstract is illustrated below.

A standard abstract starts with a very general statement and becomes more specific with each sentence that follows until once again making a broad statement about the study’s implications at the end. Altogether, a standard abstract has six functions, which are described in detail below.

Start by making a broad statement about your topic.

The first sentence of your abstract should briefly describe a problem that is of interest to your readers. When writing this first sentence, you should think about who comprises your target audience and use terms that will appeal to this audience. If your opening sentence is too broad, it might lose the attention of potential readers because they will not know if your study is relevant to them.

Too broad : Maintaining an ideal workplace environment has a positive effect on employees.

The sentence above is so broad that it will not grab the reader’s attention. While it gives the reader some idea of the area of study, it doesn’t provide any details about the author’s topic within their research area. This can be fixed by inserting some keywords related to the topic (these are underlined in the revised example below).

Improved : Keeping the workplace environment at an ideal temperature positively affects the overall health of employees.

The revised sentence is much better, as it expresses two points about the research topic—namely, (i) what aspect of workplace environment was studied, (ii) what aspect of employees was observed. The mention of these aspects of the research will draw the attention of readers who are interested in them.

Describe the general problem that your paper addresses.

After describing your topic in the first sentence, you can then explain what aspect of this topic has motivated your research. Often, authors use this part of the abstract to describe the research gap that they identified and aimed to fill. These types of sentences are often characterized by the use of words such as “however,” “although,” “despite,” and so on.

However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking.

The above example is typical of a sentence describing the problem that a study intends to tackle. The author has noticed that there is a gap in the research, and they briefly explain this gap here.

Although it has been established that quantity and quality of sleep can affect different types of task performance and personal health, the interactions between sleep habits and workplace behaviors have received very little attention.

The example above illustrates a case in which the author has accomplished two tasks with one sentence. The first part of the sentence (up until the comma) mentions the general topic that the research fits into, while the second part (after the comma) describes the general problem that the research addresses.

Express the specific problem investigated in your paper.

After describing the general problem that motivated your research, the next sentence should express the specific aspect of the problem that you investigated. Sentences of this type are often indicated by the use of phrases like “the purpose of this research is to,” “this paper is intended to,” or “this work aims to.”

Uninformative : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to provide new insights into the relationship between workplace bullying and absenteeism .

The second sentence in the above example is a mere rewording of the first sentence. As such, it adds nothing to the abstract. The second sentence should be more specific than the preceding one.

Improved : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to define various subtypes of workplace bullying and determine which subtypes tend to lead to absenteeism .

The second sentence of this passage is much more informative than in the previous example. This sentence lets the reader know exactly what they can expect from the full research article.

Explain how you attempted to resolve your study’s specific problem.

In this part of your abstract, you should attempt to describe your study’s methodology in one or two sentences. As such, you must be sure to include only the most important information about your method. At the same time, you must also be careful not to be too vague.

Too vague : We conducted multiple tests to examine changes in various factors related to well-being.

This description of the methodology is too vague. Instead of merely mentioning “tests” and “factors,” the author should note which specific tests were run and which factors were assessed.

Improved : Using data from BHIP completers, we conducted multiple one-way multivariate analyses of variance and follow-up univariate t-tests to examine changes in physical and mental health, stress, energy levels, social satisfaction, self-efficacy, and quality of life.

This sentence is very well-written. It packs a lot of specific information about the method into a single sentence. Also, it does not describe more details than are needed for an abstract.

Briefly tell the reader what you found by carrying out your study.

This is the most important part of the abstract—the other sentences in the abstract are there to explain why this one is relevant. When writing this sentence, imagine that someone has asked you, “What did you find in your research?” and that you need to answer them in one or two sentences.

Too vague : Consistently poor sleepers had more health risks and medical conditions than consistently optimal sleepers.

This sentence is okay, but it would be helpful to let the reader know which health risks and medical conditions were related to poor sleeping habits.

Improved : Consistently poor sleepers were more likely than consistently optimal sleepers to suffer from chronic abdominal pain, and they were at a higher risk for diabetes and heart disease.

This sentence is better, as the specific health conditions are named.

Finally, describe the major implication(s) of your study.

Most abstracts end with a short sentence that explains the main takeaway(s) that you want your audience to gain from reading your paper. Often, this sentence is addressed to people in power (e.g., employers, policymakers), and it recommends a course of action that such people should take based on the results.

Too broad : Employers may wish to make use of strategies that increase employee health.

This sentence is too broad to be useful. It does not give employers a starting point to implement a change.

Improved : Employers may wish to incorporate sleep education initiatives as part of their overall health and wellness strategies.

This sentence is better than the original, as it provides employers with a starting point—specifically, it invites employers to look up information on sleep education programs.

Abstract Example

The abstract produced here is from a paper published in Electronic Commerce Research and Applications . I have made slight alterations to the abstract so that this example fits the guidelines given in this article.

(1) Gamification can strengthen enjoyment and productivity in the workplace. (2) Despite this, research on gamification in the work context is still limited. (3) In this study, we investigated the effect of gamification on the workplace enjoyment and productivity of employees by comparing employees with leadership responsibilities to those without leadership responsibilities. (4) Work-related tasks were gamified using the habit-tracking game Habitica, and data from 114 employees were gathered using an online survey. (5) The results illustrated that employees without leadership responsibilities used work gamification as a trigger for self-motivation, whereas employees with leadership responsibilities used it to improve their health. (6) Work gamification positively affected work enjoyment for both types of employees and positively affected productivity for employees with leadership responsibilities. (7) Our results underline the importance of taking work-related variables into account when researching work gamification.

In Sentence (1), the author makes a broad statement about their topic. Notice how the nouns used (“gamification,” “enjoyment,” “productivity”) are quite general while still indicating the focus of the paper. The author uses Sentence (2) to very briefly state the problem that the research will address.

In Sentence (3), the author explains what specific aspects of the problem mentioned in Sentence (2) will be explored in the present work. Notice that the mention of leadership responsibilities makes Sentence (3) more specific than Sentence (2). Sentence (4) gets even more specific, naming the specific tools used to gather data and the number of participants.

Sentences (5) and (6) are similar, with each sentence describing one of the study’s main findings. Then, suddenly, the scope of the abstract becomes quite broad again in Sentence (7), which mentions “work-related variables” instead of a specific variable and “researching” instead of a specific kind of research.

Abstract Templates

Copy and paste any of the paragraphs below into a word processor. Then insert the appropriate information to produce an abstract for your research paper.

Template #1

Researchers have established that [Make a broad statement about your area of research.] . However, [Describe the knowledge gap that your paper addresses.] . The goal of this paper is to [Describe the purpose of your paper.] . The achieve this goal, we [Briefly explain your methodology.] . We found that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #2

It is well-understood that [Make a broad statement about your area of research.] . Despite this, [Describe the knowledge gap that your paper addresses.] . The current research aims to [Describe the purpose of your paper.] . To accomplish this, we [Briefly explain your methodology.] . It was discovered that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #3

Extensive research indicates that [Make a broad statement about your area of research.] . Nevertheless, [Describe the knowledge gap that your paper addresses.] . The present work is intended to [Describe the purpose of your paper.] . To this end, we [Briefly explain your methodology.] . The results revealed that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

• How to Write an Abstract

Related Posts

How to Write a Research Paper in English: A Guide for Non-native Speakers

How to Write an Abstract Quickly

Using the Present Tense and Past Tense When Writing an Abstract

How To Write an Abstract for Any Subject and Publication (With Examples)

Table of contents

Christian Rigg

An abstract is a short summary of a longer work, such as a study or research paper. The goal is to provide readers with an overview of the purpose, methodology, results, conclusion, and importance of this text.

As a writing coach and part-time academic editor and translator, I’ve read hundreds of abstracts and helped authors draft and refine dozens more. I’ve found that, when writing an abstract, the greatest difficulty lies in balancing brevity, detail, and accessibility.

Fortunately, there’s a simple formula you can use to write a solid abstract for publication, regardless of the subject. What’s more, you can leverage AI to help you write a clear, concise abstract — without losing your voice or sounding unprofessional.

Below you’ll find step-by-step instructions, best practices, examples, and a helpful checklist. 

Key Takeaways

• An abstract offers a succinct overview of the aims, results, and importance of your research.
• Check submission guidelines, write clearly and concisely, and use language to “guide” readers through your abstract. 
• The IMRaD (Introduction, Methodology, Results, and Discussion) approach is simple and effective. 
• More and more authors are using AI to do the heavy lifting. With the right prompts, AI can save you time and create a cohesive abstract.

Writing an abstract: First steps and best practices

Keep the following in mind as you write your abstract:

• If you’re submitting to a publication , check for specific guidelines regarding overall length, format, keywords, and the presence or absence of section headings (e.g. “Purpose”). Follow these guidelines exactly.
• Write concisely and clearly . If you struggle to write concisely, consider using an AI-writing assistant like Wordtune . Simply select text to receive suggestions on how to write a sentence or paragraph more concisely without losing any value.
• Make your abstract self-contained . Don’t refer to passages in your article or research. If you must include terms that your audience may not be familiar with, such as highly technical jargon or concepts borrowed from another field, offer a brief definition.
• Use connecting phrases like “for this reason,” “as a result,” and “this led us” to “guide” the reader through your abstract and help them see the connections between your research goal, methodology, results, and conclusions. ‍
• Read abstracts on similar studies . This gives you a good benchmark and can help you get started. If you’re submitting your abstract to a particular publication, it also gives you a good idea of the type of language and structure they prefer.

Get Wordtune for free > Get Wordtune for free >

How to write an abstract: The IMRaD Structure

IMRaD stands for Introduction, Methodology, Results, and Discussion (or Conclusion). 

It’s the most common way to structure a research paper and a very simple way to approach your abstract. In some cases, authors even include these section headings in their abstracts. 

Step One: Introduction

Length : About 25% of your abstract

Purpose : Provide context for your research and describe your research objectives. 

Start by introducing your topic. There are two main parts to this:

• Your research question stated simply and straightforwardly (what missing knowledge does your study aim to answer?). You can use words like “investigate,” “review,” “test,” “analyze,” “study,” and “evaluate” to make it clear how your work relates to the context.
• A brief overview of the academic, historical, social, or scientific context. This helps the reader understand the importance and relevance of your work. In many cases, starting with context before your research question makes more sense, so feel free to write in that order. 

Regarding context, consider the following: 

For example:

Psychologists and neuroscientists have long studied the role of sleep in the formation of new memories. Previous research into how sleep affects memory has often struggled because it’s difficult to measure the quality, stages, and overall impact of sleep accurately. As a result, there’s ongoing debate in the scientific community , and recent research suggests sleep may not be as important as researchers once thought. In this study, we review the evidence and offer a novel conclusion : the same mechanisms thought to mediate sleep-related memory formation also operate during waking hours, particularly quiet wakefulness.  In this example, several contextual cues are offered: it’s a long-standing topic in the literature; previous research is limited due to a specific issue , and there is active scientific debate . The section closes with the research aims: to review the evidence and offer a new conclusion. 

Step Two: Methodology

Purpose : Clearly describe what you did and highlight novelty. 

In this section, provide a clear description of your research methodology. While it’s important to be concise, make sure you’re not being vague. Mention specific frameworks and tools. 

‍ To explore the impact of social media on political engagement, we conducted a study with 200 participants, divided into two groups. The first was exposed to curated political content on social media, while the control group received a neutral feed. Our mixed-method approach combined quantitative engagement metrics analysis and qualitative interviews to assess changes in political participation.

There’s no need to provide an in-depth justification of your approach, although if it’s a novel one, it’s worth highlighting this and explaining what makes it appropriate. For example, " We chose this approach because it offers a clearer image of the structure of proteins involved in the transfer of electrons during cellular respiration ."

Finally, you can omit methodological limitations; we’ll cover these later. 

Step Three: Results

Length : About 35% of your abstract

Purpose : Provide a clear, specific account of your results. 

This section is arguably the most important (and interesting) part of your abstract.

Explain the results of your analysis in a specific and detailed fashion. This isn’t the time to be vague or bury the lead. For example:

“Our survey indicates a marked shift in sedimentary rock composition. In three locations, we observed significant erosion, and mineralogical analysis revealed a high concentration of quartz. Further analysis suggests two major events in the past 200 years, correlating with disturbances in the region.”

"Our survey of the Redstone Canyon region identified a marked shift in sedimentary rock composition from predominantly sandstone to shale, particularly evident in the lower strata. Quantitative analysis showed a 40% increase in shale content compared to previous surveys. In three distinct locations, we observed significant erosion, with up to two meters of topsoil displacement, primarily due to water runoff. Mineralogical analysis revealed an unexpectedly high concentration of quartz (up to 22%) in these eroded areas. Additionally, our seismic retrogression analysis suggests two major seismic events in the past 200 years, correlating with the observed stratification disturbances."

Incidentally, you don’t need to include all of your findings here, only those that will help the reader to understand the next section: your discussion and conclusion (i.e., what the results mean). This will help you keep the results section concise and relevant. 

Step Four: Discussion/Conclusion

Length : About 15%

Purpose : Present what new knowledge you’ve found and why it matters.

Bearing in mind your research question, give a clear account of your conclusions. What new knowledge has been gained? 

The simplest way to do this is in the present tense: “We conclude that…”

You should also briefly explain why this matters. What are the implications of your findings? Be specific and avoid making claims that aren’t directly supported by your research. 

If there are any important limitations (such as population or control group size), you can mention them now. This helps readers assess the credibility and generalizability of your findings. 

You can use these samples for inspiration.

They are divided into introduction , methodology , results , and conclusion.

The rising urbanization rate poses challenges to mental health, an issue garnering increasing attention in recent years. This study aims to analyze the impact of urban green spaces on the mental health of city dwellers. The focus is on how access to parks and natural environments within urban settings contributes to psychological well-being . For this purpose, we employed a cross-sectional survey methodology, targeting residents in three major cities with varying levels of green space availability. We used a combination of GIS mapping to determine green space distribution and structured questionnaires to assess mental health indicators among 1,000 participants . Our results show a clear correlation between access to green spaces and improved mental health outcomes. Residents with frequent access to parks reported 30% lower stress levels and a 25% reduction in symptoms related to anxiety and depression, compared to those with limited access. Additionally, our analysis revealed that green spaces in dense urban areas had a more significant impact than those in less populated districts . We conclude that urban green spaces play a crucial role in enhancing mental health. This underscores the importance of urban planning policies that prioritize green space development as a public health strategy. These findings have significant implications for city planning and public health policy, advocating for the integration of green spaces in urban development to foster mental well-being .

The phenomenon of antibiotic resistance is a growing concern in medical science. This study investigates the effectiveness of novel synthetic peptides as potential antibiotics against multi-drug resistant bacteria. The research specifically examines the impact of these peptides on the cellular integrity and replication processes of resistant bacterial strains . Our methodology involved in vitro testing of three newly synthesized peptides against a panel of bacteria known for high resistance to conventional antibiotics. The bacterial strains included methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococci (VRE). We used a combination of microbiological assays and electron microscopy to evaluate the antibacterial activity and the cellular changes induced by the peptides . The results were promising, showing that two of the three peptides effectively inhibited the growth of MRSA and VRE at low concentrations. Electron microscopy revealed significant disruption of bacterial cell walls and membranes, leading to cell lysis. These peptides also demonstrated low toxicity in preliminary mammalian cell culture tests, suggesting a high therapeutic index . Our study provides promising evidence for the use of synthetic peptides in combating antibiotic-resistant bacteria. These findings open new avenues for developing effective treatments against infections caused by drug-resistant pathogens and highlight the potential of peptide-based therapies in future pharmaceutical applications .

The integration of artificial intelligence (AI) in education is a rapidly evolving area of study. This research explores the effectiveness of AI-driven personalized learning systems in enhancing student performance in high school mathematics. The study focuses on understanding how AI customization impacts learning outcomes compared to traditional teaching methods . We conducted a randomized controlled trial involving 500 high school students from five schools, divided into two groups. The experimental group used an AI-based learning platform that adapted to each student's learning pace and style, while the control group continued with standard classroom instruction. The study measured improvements in mathematical understanding and problem-solving skills over a six-month period . The results indicated a significant improvement in the AI group, with a 40% increase in test scores and a 35% rise in problem-solving abilities compared to the control group. Additionally, students using the AI system reported higher levels of engagement and satisfaction with the learning process . In conclusion, the use of AI-driven personalized learning systems shows considerable promise in enhancing educational outcomes in mathematics. This study suggests that AI personalization can be a valuable tool in modern educational strategies, potentially revolutionizing how subjects are taught and learned in schools .

What is the main objective of an abstract?

The goal of an abstract is to provide readers with a concise overview of the purpose, methodology, results, conclusion, and importance of a longer work, such as a research paper or study. 

How long should an abstract be?

Depending on the publication, an abstract should be anywhere from 150 to 250 words. 

What should an abstract include?

An abstract should include an introduction (context + research question), the methodology, the results, and a conclusion (what you found and why it matters).

IMRaD is a simple formula you can follow to write a great abstract for any topic and publication type. Simply follow the instructions above to write each section: Introduction, Methodology, Results, and Discussion/Conclusion.

Be careful to balance detail with brevity, as abstracts are meant to be a short overview of your study. If you struggle with writing concisely and clearly, consider using a writing aid like Wordtune to handle some of the heavy lifting. 

Want to learn more key writing tips? Check out these articles:

• How to Write Concisely and Effectively (+Examples)
• Transition Word Examples and How to Use Them Effectively
• How to Write a Research Paper (+Free AI Research Paper Writer)

Share This Article:

8 Tips for E-commerce Copywriting Success (with Examples!)

The Brand Strategy Deck You Need to Drive Social Media Results + 5 Examples

Grammarly Alternatives: Which Writing Assistant is the Best Choice for You?

Looking for fresh content, thank you your submission has been received.

Generate accurate APA citations for free

• Knowledge Base
• APA Style 6th edition
• How to write and format an APA abstract (6th edition)

How to write and format an APA Abstract (6th edition)

Published on November 6, 2020 by Courtney Gahan .

An APA abstract is a summary of your paper in 150–250 words. It describes the research problem , methods , results and conclusions of your research. For published papers, it also includes a list of keywords.

Write the abstract after you have finished your paper, and place it on a separate page after the title page .

The formatting of the abstract page is the same as the rest of an APA style paper : double-spaced, Times New Roman 12pt font, one-inch margins, and a running head at the top of the page.

Table of contents

Apa format abstract example, how to write an apa abstract, apa abstract keywords.

SCRIBBR APA ABSTRACT EXAMPLE RUNNING HEAD 1

What is the problem? Outline the objective, problem statement, research questions and hypotheses. What has been done? Explain your method. What did you discover? Summarize the key findings and conclusions. What do the findings mean? Summarize the discussion and recommendations. What is the problem? Outline the objective, problem statement, research questions and hypotheses. What has been done? Explain your method. What did you discover? Summarize the key findings and conclusions. What do the findings mean? Summarize the discussion and recommendations. What is the problem? Outline the objective, problem statement, research questions and hypotheses. What has been done? Explain your method. What did you discover? Summarize the key findings and conclusions. What do the findings mean? Summarize the discussion and recommendations. What is the problem? Outline the objective, problem statement, research questions and hypotheses. What has been done? Explain your method. What did you discover? Summarize the key findings and conclusions. What do the findings mean? Summarize the discussion and recommendations. What is the problem? Outline the objective, problem statement, research questions and hypotheses. What has been done? Explain your method. What did you discover? Summarize the key findings and conclusions. What do the findings mean? Summarize the discussion and recommendations.

Keywords : example keyword, example keyword, example keyword

An APA abstract must be formatted as follows:

• Include the running head aligned to the left at the top of the page
• On the first line, write the heading “Abstract” (centered and without any formatting)
• Do not indent any part of the text
• Double space the text
• Use Times New Roman font in 12 pt
• Set one-inch (or 2.54 cm) margins
• If you include a “keywords” section at the end of the abstract, indent the first line and italicize the word “Keywords” while leaving the keywords themselves without any formatting

Prevent plagiarism. Run a free check.

Simply answer the following questions and put them together, then voila! You have an abstract for your paper.

• What is the problem? Outline the objective , research questions and/or  hypotheses .
• What has been done? Explain your research methods .
• What did you discover? Summarize the key findings and conclusions .
• What do the findings mean? Summarize the discussion and recommendations .

If you need more guidance writing your abstract, read our detailed instructions on what to include and see an abstract example.

How to write an abstract

At the end of the abstract, you can also include a short list of keywords that will be used for indexing if your paper is published on a database. Listing your keywords will help other researchers find your work.

Make sure that your keywords:

• Accurately represent the content
• Are specific to your field

APA abstract keywords example

Here is an example of an APA format paper published as a chapter in a book, where the author has included a set of keywords. The author has chosen the terms listed in the title as keywords as well as several other related keywords that feature in their research.

Book chapter title: Nonparalytic Polio and Post-Polio Syndrome

From: Post-Polio Syndrome: A Guide for Polio Survivors and Their Families (pp. 21-26), Julie K. Silver, Yale University Press (2001)

Keywords: Polio, Paralysis, Symptoms, Postpoliomyelitis syndrome, Medical diagnosis, Legs, Physicians, Strokes, Misdiagnosis

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Gahan, C. (2020, November 06). How to write and format an APA Abstract (6th edition). Scribbr. Retrieved July 17, 2024, from https://www.scribbr.com/apa-style/6th-edition/archived-abstract/

Is this article helpful?

Courtney Gahan

Scribbr apa citation checker.

An innovative new tool that checks your APA citations with AI software. Say goodbye to inaccurate citations!

How to Write an Abstract

An abstract of a work, usually of an essay, is a concise summary of its main points. It is meant to concentrate the argument of a work, presenting it as clearly as possible.

The abstract often appears after the title and before the main body of an essay. If you are writing an abstract as part of an assignment, you should check with your instructor about where to place it.

Here are a few guidelines to follow when composing an abstract:

• In general, avoid too much copying and pasting directly from your essay, especially from the first paragraph. An abstract is often presented directly before an essay, and it will often be the first thing readers consult after your title. You wouldn’t repeat your ideas verbatim in the body of your essay, so why would you do that in an abstract? Consider the abstract part of the work itself. 
• Start off strong. An abstract should be a mini essay, so it should begin with a clear statement of your argument. This should be the first sentence or two.
• Abstracts vary in length. But a good rule is to aim for five to seven sentences. The bulk of the abstract will review the evidence for your claim and summarize your findings.
• Avoid complicated syntax. Long sentences and intricate phrasing have their place in essays, but the abstract should be concise. It is not the place for ambitious grammar.
• The last sentence or two should point to any conclusions reached and the direction future research might take. Like the first sentence, the last should be provocative and direct. Leave your readers wanting to read your essay.

In what follows, the authors have written an effective abstract that adheres to the basic principles above:

Literary critics have long imagined that T. S. Eliot’s The Sacred Wood (1920) shaped the canon and methods of countless twentieth-century classrooms. This essay turns instead to the classroom that made The Sacred Wood : the Modern English Literature extension school tutorial that Eliot taught to working-class adults between 1916 and 1919. Contextualizing Eliot’s tutorial within the extension school movement shows how the ethos and practices of the Workers’ Educational Association shaped his teaching. Over the course of three years, Eliot and his students reimagined canonical literature as writing by working poets for working people—a model of literary history that fully informed his canon reformation in The Sacred Wood . This example demonstrates how attention to teaching changes the history of English literary study. It further reveals how all kinds of institutions, not just elite universities, have shaped the discipline’s methods and canons. (Buurma and Heffernan)

This abstract uses the first two sentences to establish the essay’s place in its field of study and to suggest how it intervenes in existing scholarship. The syntax is direct and simple. The third sentence begins to outline how the authors will support their argument. They aim to demonstrate the relevance of Eliot’s teaching to his ideas about literature, and so they move next to discuss some of the details of that teaching. Finally, the abstract concludes by telling us about the consequences of this argument. The conclusion both points to new directions for research and tells us why we should read the essay. 

Buurma, Rachel Sagner, and Laura Heffernan. Abstract of “The Classroom in the Canon: T. S. Eliot’s Modern English Literature Extension Course for Working People and  The Sacred Wood. ”  PMLA , vol. 133, no. 2, Mar. 2018, p. 463.

Estate Best 18 July 2021 AT 05:07 AM

Please how will I write an abstract for my own poem collections?

Your e-mail address will not be published

Marc Simoes 01 April 2022 AT 04:04 PM

I am teaching students how to format and write an abstract, but I find no precise guidelines in the MLA Handbook. Should the first word of the abstract body text begin with the word "Abstract" followed by a period or colon and then the abstract content? Should the word "Abstract" be underlined? Over the years, I was taught both of these ways by different instructors, but I haven't found any definitive instructions, and now my students are asking me the correct format. Please help! Thank you!

Joseph Wallace 12 April 2022 AT 01:04 PM

Although publishers like the MLA will use their own house style guidelines for abstracts in published material, there is no one correct way for students to format their abstracts. Instructors should decide what works best for their classes and assignments.

Lorraine Belo 17 April 2022 AT 10:04 PM

Can you write a brief abstract about your MLA writing

Subrata Biswas 13 July 2023 AT 10:07 AM

Generally, the abstract is written in Italics. Is there any rule as such?

Joseph Wallace 31 July 2023 AT 10:07 AM

Thanks for your question. There is no rule saying that abstracts need to be written in italics. Some publications use italics for abstracts and some do not.

Dhan 07 January 2024 AT 12:01 PM

Should I write key words at the end of the abstract of Phd dissertation?

Join the Conversation

We invite you to comment on this post and exchange ideas with other site visitors. Comments are moderated and subject to terms of service.

If you have a question for the MLA's editors, submit it to Ask the MLA!

How To Write A Research Paper

Research Paper Abstract

How to Write an Abstract For a Research Paper with Examples

12 min read

Published on: Jan 19, 2024

Last updated on: Jan 30, 2024

People also read

How to Write a Research Paper Step by Step

How to Write a Proposal For a Research Paper in 10 Steps

A Comprehensive Guide to Creating a Research Paper Outline

Types of Research - Methodologies and Characteristics

300+ Engaging Research Paper Topics to Get You Started

Interesting Psychology Research Topics & Ideas

Qualitative Research - Types, Methods & Examples

Understanding Quantitative Research - Definition, Types, Examples, And More

Research Paper Example - Examples for Different Formats

How To Start A Research Paper - Steps With Examples

How To Write a Literature Review for a Research Paper | Steps & Examples

Types of Qualitative Research Methods - An Overview

Understanding Qualitative vs. Quantitative Research - A Complete Guide

How to Cite a Research Paper in Different Citation Styles

Easy Sociology Research Topics for Your Next Project

200+ Outstanding History Research Paper Topics With Expert Tips

How To Write a Hypothesis in a Research Paper | Steps & Examples

How to Write an Introduction for a Research Paper - A Step-by-Step Guide

How to Write a Good Research Paper Title

How to Write a Conclusion for a Research Paper in 3 Simple Steps

How To Write a Thesis For a Research Paper Step by Step

How to Write a Discussion For a Research Paper | Objectives, Steps & Examples

How to Write the Results Section of a Research Paper - Structure and Tips

How to Write a Problem Statement for a Research Paper in 6 Steps

How To Write The Methods Section of a Research Paper Step-by-Step

How to Find Sources For a Research Paper | A Guide

Share this article

Struggling to encapsulate your extensive research into a concise abstract? Writing an abstract for a research paper can be intimidating, but it doesn't have to be! 

This blog is your guide to deciphering the abstract, understanding its purpose, and learning the art of writing your own.

We'll break down the abstract into clear, simple steps. We'll show you what it is, why it matters, and most importantly, how to write one that's clear, concise, and grabs your reader's attention. 

So, leave your confusion behind, and let’s dive into it!

On This Page On This Page -->

What is an Abstract in a Paper?

An abstract in a research paper is a concise summary that provides an overview of the main points and key elements of the entire document. It is typically found at the beginning of academic papers, articles, or research reports. 

The abstract serves as a standalone piece that briefly communicates the purpose, methodology, results, and conclusions of the study.

Usually ranging from 150 to 250 words, an abstract provides readers with a quick overview of the entire text.

Purpose of Abstracts

Abstracts serve several essential purposes in academic and professional settings, and therefore the importance of abstracts in research can not be overlooked. The primary objectives of abstracts include:

• Concise Summary : Distills key elements for quick understanding.
• Quick Information Retrieval : Saves time by offering a snapshot of document relevance.
• Decision-Making Tool : Helps researchers choose studies aligning with their objectives.
• Communication of Research : Disseminates findings to diverse audiences effectively.
• Database Indexing : Facilitates efficient literature review in academic databases.
• Conference and Journal Submissions : Essential requirement for evaluating contributions' merit and relevance.

When to Write an Abstract?

We need to include an abstract when:

• Submitting research papers for publication.
• Sending research proposals for conferences or academic events.
• Completing theses, dissertations, or comprehensive reports.
• Drafting articles for scholarly journals.
• Presenting academic projects or detailed proposals.

Types of Abstract

There are 2 basic types of abstract writing:

Paper Due? Why Suffer? That's our Job!

The Contents of an Abstract

An abstract typically includes the following components:

• Purpose/Objective : Clearly states the primary goal of the research or document.
• Methods/Approach : Briefly outline the methodology or approach used in the study.
• Results/Findings : Highlights the main outcomes or discoveries of the research.
• Conclusions/Implications : Summarize the key conclusions and their broader significance.

Another way to structure your abstract is to use the IMRaD structure. It stands for:

• Introduction : Introduces the research topic and the problem under investigation.
• Methods : Describes the research methods and experimental design employed.
• Results : Presents the main findings or outcomes of the study.
• Discussion : Analyzes the results, discusses their implications, and draws conclusions.

Adhering to the IMRaD structure ensures a logical flow in your abstract, making it comprehensible and informative for readers.

How to Write an Abstract in 5 Steps?

Let’s take a look at the simple steps to write an abstract for a research paper: 

Step 1: Craft an Engaging Introduction 

Begin by clearly defining the purpose of your research. Identify the practical or theoretical problem your research addresses and state the research question you aim to answer. 

Provide brief context on the social or academic relevance of your topic without delving into detailed background information. If using specialized terms, offer concise definitions. 

Use verbs like "investigate," "analyze," or "evaluate" to describe your research objective. Write in the present or past simple tense, avoiding references to the future, as the research is already complete.

Step 2: Outline Your Methods Clearly

Outline the research methods and experimental design employed in your study. Refrain from evaluating the validity or challenges of your methodology. Provide a clear description of how you conducted your research, including any specific techniques, tools, or procedures used.

Be concise but offer enough detail for readers to understand the approach you took. Use the past simple tense to describe methods. 

Step 3: Present Your Results with Precision

Highlight the main findings or outcomes of your research. Summarize the data collected and present key results without interpretation. Use clear and specific language to convey the essential elements of your study.

This section of the abstract can use either present or past simple tense.

Step 4: Articulate a Thoughtful Discussion

Analyze the results and discuss their implications. Interpret the findings in the context of your research question and objectives. Explore the broader significance of your results and any potential applications or recommendations.

Include brief mentions of any significant limitations in your research, such as those related to sample size or methods. This provides readers with insights to assess the credibility and generalizability of your study.

Step 5: List Relevant Keywords

Conclude your abstract by listing keywords that capture the essential concepts and topics addressed in your research. These keywords assist in indexing and categorizing your work for easy retrieval in academic databases.

Abstract Examples

Below are some samples to help you understand how to write an effective abstract for a research paper: 

Sample Abstract 1

Abstract for a research paper humanities

Bagó, B., Kovács, M., Protzko, J., Nagy, T., Kekecs, Z., Pálfi, B., Adamkovi?, M., Adamus, S., Albalooshi, S., Albayrak?Aydemir, N., Alfian, I., Alper, S., Solas, S. Á., Alves, S. G., Amaya, S., Andresen, P., Anjum, G., Ansari, D., Arriaga, P., . . . Aczél, B. (2022). Situational factors shape moral judgements in the trolley dilemma in Eastern, Southern and Western countries in a culturally diverse sample. Nature Human Behaviour , 6 (6), 880–895. https://doi.org/10.1038/s41562-022-01319-5

Sample Abstract 2

Social sciences Abstract 

Reference : 

Hanlon, M., Yeung, K., & Zuo, L. (2021). Behavioral Economics of Accounting: A review of archival research on individual decision makers*. Contemporary Accounting Research , 39 (2), 1150–1214. https://doi.org/10.1111/1911-3846.12739

Sample Abstract 3

Abstract for the Sciences

Reference: 

Widén, E., Junna, N., Ruotsalainen, S., Surakka, I., Mars, N., Ripatti, P., Partanen, J., Aro, J., Mustonen, P., Tuomi, T., Palotie, A., Salomaa, V., Kaprio, J., Partanen, J., Hotakainen, K., Pöllänen, P., & Ripatti, S. (2022). How Communicating Polygenic and Clinical Risk for Atherosclerotic Cardiovascular Disease Impacts Health Behavior: an Observational Follow-up Study. Circulation , 15 (2). https://doi.org/10.1161/circgen.121.003459

Tough Essay Due? Hire Tough Writers!

Sample IMRaD Abstract

Here are some PDF samples of the abstract; check them out for a more detailed understanding: 

Abstract For a Research Paper Example

Abstract For a Research Paper Sample

Abstract For a Research Paper APA 7

Abstract For a Research Paper Proposal

Tips For Writing an Abstract

Here are some essential tips for writing an effective abstract:

• Understand the Types : Familiarize yourself with different types of abstracts – such as descriptive abstracts and informative abstracts.
• Clarity is Key: A good abstract is clear, concise, and easily understandable. Avoid unnecessary jargon or complex language.
• Follow a Structure : Organize your abstract with a structured format, including the research problem, methodology, key findings, and conclusions.
• Stay Within Word Limits : Adhere to specified word limits. Balancing brevity while conveying essential information is crucial.
• Define the Research Problem : Clearly state the research problem or objective to provide context for your study.
• Highlight Methodology : Briefly describe the methods used in your research, giving readers insight into your approach.
• Include Vital Information: Specify the type of information covered in your research abstract.
• Active Voice and Strong Verbs : Use active voice and strong verbs to convey a sense of authority and engagement.
• Follow Guidelines : Adhere to formatting requirements stated in the title page or table of contents.
• Choose Impactful Keywords: Incorporate relevant keywords that potential readers might use when searching for similar studies.
• Revise and Edit : Prioritize the clarity and coherence of your abstract, ensuring it aligns with guidelines and objectives.

 Abstract Checklist

Here's a checklist for writing an abstract for a research paper:

In summary, writing a compelling abstract is essential for conveying your research paper's core elements concisely. Remember, clarity and brevity are key. Feel free to revisit the examples provided for inspiration. 

If you face challenges in any section, including the abstract, reach out to CollegeEssay.org for professional assistance. Our expert writing service is here to guide you through academic intricacies. 

Get research paper writing help today for tailored support in achieving your scholarly goals.

Cathy A. (Marketing, Literature)

For more than five years now, Cathy has been one of our most hardworking authors on the platform. With a Masters degree in mass communication, she knows the ins and outs of professional writing. Clients often leave her glowing reviews for being an amazing writer who takes her work very seriously.

Paper Due? Why Suffer? That’s our Job!

Keep reading

Legal & Policies

• Privacy Policy
• Cookies Policy
• Terms of Use
• Refunds & Cancellations
• Our Writers
• Success Stories
• Our Guarantees
• Affiliate Program
• Referral Program
• AI Essay Writer

Disclaimer: All client orders are completed by our team of highly qualified human writers. The essays and papers provided by us are not to be used for submission but rather as learning models only.

• Our Writers
• Revision Policy
• Testimonials

professional writing service. Thousands of satisfied customers. Since 2003

How to Write a Term Paper Abstract

When you are at university, you will be assigned written tasks of different kinds. Whilst most are similar in their form, most have their own rule you need to follow. When you come to larger projects, you will find that you are required to write an abstract. A thesis, research reports and service projects for example, will need an abstract.

The term paper abstract is an important part of the paper. It concisely describes the content and scope of the project and the project’s objective, the methodology and its findings, conclusions, or intended results.

It is not a description of your topic. Some get confused on this point. Your abstract is about your research methods and goals. Your introduction determines the description of your topic. In short, the abstract describes what you are doing, whilst the introduction is about whatever subject you are doing. Abstracts are very short, it is important you do not turn it into a lengthy summary of the entire background of your topic. To help you when writing your abstract, stop at the end of every sentence and make sure you are dealing with the project. Abstracts also vary from discipline to discipline, and sometimes within disciplines. Abstracts in the hard sciences and social sciences often put more emphasis on methods than the humanities. A humanities abstracts will give more time to explain their objective than science abstracts. Even within single disciplines, abstracts often differ. It is best to ask your professor what exactly you are expected to do in your discipline, and obtain examples of abstracts from your field.

No matter the field, every abstract should include four main types of information. It should state the main objective of your project, what the problem or the main issue is; and why did you want to do this project in the first place. Then it should outline the methods you used to accomplish your objectives, explain how you went about solving the problem or exploring the issue you identified as your main objective. It should list your project’s results or intended results. This section of the abstract should list the results of the work you have done so far. Finally, it should draw conclusions about the implications of your project and close with a statement of the project’s implications and contributions to its field. This whole abstract must be brief, therefore be straightforward and do not use unnecessary words. Start by condensing what you have done and reduce it to the essential points.

Alternatively, you can order a term paper from our professional writers. They all are academic graduates with the knowledge already available and their writing skills are well developed. Once you place an order on our website, they will quickly write an original paper for you from scratch. It will be of high quality, sound content and plagiarism free, all done for a reasonable price. They can also help edit and perfect what you have already done. Just let us know your needs and we will meet them.

• Sample Term Papers
• Term Paper Examples
• Term Paper Help
• October 2015
• November 2014
• December 2013
• October 2013
• September 2013
• August 2013
• February 2011
• January 2011
• November 2010
• October 2010
• September 2010
• August 2010
• February 2010
• January 2010
• November 2009
• October 2009
• September 2009
• August 2009

AI Generator

A term paper is an extensive research paper typically assigned at the end of a semester or academic term, allowing students to demonstrate their understanding and in-depth knowledge of a particular subject. It involves thorough research, analysis, and synthesis of information from various sources to address a specific topic or question, culminating in a comprehensive written report. Term papers are designed to assess students’ critical thinking, research skills, and ability to communicate their findings effectively, often accounting for a significant portion of their final grade. Essential components include a Thesis Statement for Research Paper , a Research Paper Cover Letter , and adherence to the Research Paper Format .

What is Term Paper?

A term paper is a detailed research paper written by students over an academic term, contributing significantly to their final grade. It demonstrates their understanding and analysis of a specific topic, includes a thesis, supporting arguments, and evidence, and requires citations from academic sources.

Term Paper Format

Title of the Paper Student’s Name Course Name and Number Instructor’s Name Date of Submission

A brief summary of the paper (150-250 words) Key points, objectives, methods, results, and conclusions

Introduction

Introduction to the topic Thesis statement Purpose and objectives Paper overview

Literature Review

Overview of Existing Research Key Theories and Studies Gaps in the Literature Relevance to the Current Study

Methodology

Research design Data collection methods Sample selection Analysis techniques

Presentation of findings Use of tables and figures (if applicable)

Interpretation of results Comparison with existing literature Implications and limitations

Summary of key findings Restatement of thesis Future research implications

List of All Sources Cited Formatted According to a Specific Citation Style (APA, MLA, Chicago, etc.)

Appendices (if applicable)

Additional Material Raw Data Questionnaires Detailed Calculations

Formatting Guidelines

Font: Times New Roman, 12-point Spacing: Double-spaced Margins: 1 inch Page numbers: Top right corner Consistent headings and subheadings

Term Paper Examples for Students

• The Impact of Climate Change on Coastal Ecosystems
• The Role of Social Media in Modern Marketing Strategies
• The Influence of Ancient Greek Philosophy on Western Thought
• Cybersecurity Threats and Solutions in the 21st Century
• The Effectiveness of Online Learning During the COVID-19 Pandemic
• The Relationship Between Diet and Mental Health
• An Analysis of Shakespeare’s Use of Tragic Heroes
• The Evolution of Women’s Rights in the United States
• The Economic Impact of Immigration Policies
• The Role of Artificial Intelligence in Healthcare
• The History and Future of Space Exploration
• The Psychological Effects of Video Games on Children
• The Ethics of Genetic Engineering
• The Cultural Significance of Traditional Festivals in Japan
• The Impact of Globalization on Local Economies
• The Role of Renewable Energy in Combating Climate Change
• The Effects of Substance Abuse on Family Dynamics
• An Examination of Modernist Architecture
• The Influence of the Harlem Renaissance on American Literature
• The Legal and Social Implications of Data Privacy Laws
• The Role of Sports in Promoting Social Integration
• An Analysis of Economic Inequality in Developing Countries
• The Impact of Music Therapy on Mental Health Recovery
• The Development and Impact of the Internet of Things (IoT)
• The Relationship Between Sleep Patterns and Academic Performance

Simple Term Paper Examples

• The Effects of Video Games on Child Development
• The History and Impact of the Civil Rights Movement
• Genetically Modified Organisms (GMOs): Benefits and Risks
• The Influence of Greek Philosophy on Western Thought
• The Impact of Immigration on the U.S. Economy
• The Role of Education in Reducing Poverty
• The Ethics of Animal Testing in Medical Research
• Mental Health Stigma and Its Social Implications
• The Evolution of E-commerce and Online Shopping
• The Importance of Early Childhood Education

Types of Term Papers

1. analytical term papers.

• Definition: Analyzes a specific issue or topic, breaking it down into its components and examining them in detail.
• Purpose: To provide a deep understanding of the subject through detailed analysis.
• Example: “The Economic Impact of Climate Change on Agriculture”

2. Argumentative Term Papers

• Definition: Presents an argument on a particular topic, supporting it with evidence and reasoning.
• Purpose: To persuade the reader of a specific viewpoint or stance.
• Example: “The Case for Renewable Energy Sources over Fossil Fuels”

3. Definition Term Papers

• Definition: Explores the meaning and implications of a specific concept or term.
• Purpose: To clarify and define a concept in depth.
• Example: “Defining Social Justice in Modern Society”

4. Compare and Contrast Term Papers

• Definition: Examines the similarities and differences between two or more subjects.
• Purpose: To highlight comparative aspects and provide insights into the subjects.
• Example: “Comparing Online Education with Traditional Classroom Learning”

5. Cause and Effect Term Papers

• Definition: Investigates the causes of a particular event or phenomenon and its effects.
• Purpose: To understand the relationships between events and outcomes.
• Example: “The Causes and Effects of the 2008 Financial Crisis”

6. Interpretive Term Papers

• Definition: Provides an interpretation of a specific piece of literature, artwork, or historical event.
• Purpose: To offer insights and perspectives on the subject.
• Example: “Interpreting Symbolism in F. Scott Fitzgerald’s ‘The Great Gatsby'”

7. Research-Based Term Papers

• Definition: Relies heavily on existing research and data to discuss a particular topic.
• Purpose: To present an in-depth analysis based on extensive research.
• Example: “The Role of Vaccinations in Public Health”

8. Reflective Term Papers

• Definition: Reflects on a personal experience or event and its significance.
• Purpose: To provide a personal perspective and insights.
• Example: “Reflections on My Internship Experience in a Non-Profit Organization”

9. Case Study Term Papers

• Definition: Focuses on a detailed examination of a particular case within a real-world context.
• Purpose: To analyze specific instances and draw broader conclusions.
• Example: “A Case Study of the Flint Water Crisis”

10. Expository Term Papers

• Definition: Explains or describes a topic in a straightforward and factual manner.
• Purpose: To inform and educate the reader about the subject.
• Example: “An Overview of the U.S. Healthcare System”

Importance of Term Papers

1. development of research skills.

• Encourages thorough exploration of various information sources
• Enhances data gathering, analysis, and interpretation abilities

2. Enhancement of Writing Skills

• Improves clarity, precision, and organization in writing
• Refines grammar and syntax

3. Critical Thinking and Analytical Skills

• Fosters logical reasoning and problem-solving
• Promotes evaluation and synthesis of information

4. Time Management and Discipline

• Teaches effective planning and adherence to deadlines
• Develops a disciplined work ethic and organizational skills

5. In-Depth Understanding of Subject Matter

• Facilitates comprehensive knowledge of the topic
• Enhances retention and application of theoretical concepts

How to Write a Term Paper

1. choose a topic.

• Select a topic: Ensure it’s relevant to your course and interests you.
• Narrow the focus: Make sure the topic is specific enough to be manageable.

2. Conduct Research

• Gather sources: Use books, academic journals, and credible websites.
• Take notes: Organize your notes and highlight key points.
• Create a bibliography: Keep track of all sources for your references.

3. Develop a Thesis Statement

• Clear and concise: Summarize the main point or argument of your paper.
• Position: Clearly state your position or perspective on the topic.

4. Create an Outline

• Introduction: Introduce the topic and state your thesis.
• Body paragraphs: Organize the main points and supporting evidence.
• Conclusion: Summarize your findings and restate your thesis.

5. Write the First Draft

• Hook: Grab the reader’s attention.
• Background information: Provide context.
• Thesis statement: Present your main argument.
• Topic sentence: State the main idea of the paragraph.
• Evidence: Present data, quotes, and research findings.
• Analysis: Explain how the evidence supports your thesis.
• Transition: Link to the next paragraph.
• Restate the thesis: Summarize your main argument.
• Summarize main points: Recap the key points.
• Closing statement: Provide a final thought or call to action.

6. Revise and Edit

• Review content: Ensure your arguments are clear and supported by evidence.
• Check organization: Ensure your paper flows logically.
• Edit for grammar and style: Correct any grammatical errors and improve readability.

7. Format the Paper

• Follow guidelines: Use the required formatting style (APA, MLA, Chicago, etc.).
• Title page: Include the title, your name, course, instructor, and date.
• Page numbers: Ensure all pages are numbered.
• Citations: Properly cite all sources in-text and in the bibliography.

8. Proofread

• Final check: Look for any remaining errors or typos.
• Read aloud: Helps catch mistakes you might overlook.
• Peer review: Have someone else review your paper for feedback.

9. Submit the Paper

• Meet the deadline: Ensure you submit your paper on time.
• Follow submission guidelines: Submit according to your instructor’s requirements (e.g., online or printed copy).

FAQ’s

How do i choose a topic for my term paper.

Choose a topic that interests you, is relevant to your course, and has enough research material available.

What is the structure of a term paper?

A term paper typically includes an introduction, literature review, methodology, results, discussion, conclusion, and references.

How long should a term paper be?

The length varies, but a standard term paper is usually between 8-15 pages, depending on the subject and requirements.

How do I start writing a term paper?

Begin with thorough research, create an outline, and then draft your introduction to set the context for your paper.

What is a thesis statement in a term paper?

A thesis statement is a concise summary of the main point or claim of your paper, usually placed at the end of the introduction.

How important is the introduction in a term paper?

The introduction is crucial as it sets the tone, provides background information, and presents your thesis statement.

What should be included in the literature review?

The literature review should summarize, analyze, and compare existing research relevant to your topic.

How do I cite sources in my term paper?

Use a citation style recommended by your instructor (e.g., APA, MLA, Chicago) to credit the original sources of your information.

How do I present my findings in a term paper?

Present your findings clearly and logically, using tables, charts, or graphs if necessary, in the results section.

How do I write a conclusion for a term paper?

Summarize your main points, restate the significance of your findings, and suggest areas for future research.

Text prompt

• Instructive
• Professional

10 Examples of Public speaking

20 Examples of Gas lighting

Conversations about Equity in Accounting Classrooms: Five Examples from Current Events

9 Pages Posted: 11 Jul 2024

Stephanie Miller

Quinnipiac University School of Business

Date Written: June 21, 2024

This paper provides accounting educators with resources to help them engage students in critical conversations about equity issues in accounting. Drawing from current events, we offer five example topics for classroom discussion across multiple areas of accounting. First, we discuss the equity implications of the use of facial recognition technology by the Internal Revenue Service. Second, we examine the equity impacts of layoffs. Third, we consider the use of blockchain technology in accounting to address global equity issues. Fourth, we discuss equity concerns related to the cashless economy. Lastly, we explore unique post-retirement benefit accounting requirements for the United States Postal Service and the organization's role in promoting economic and social equity. Each example includes background information, discussion prompts, and links to recent news articles that accounting faculty can use as course materials to facilitate meaningful discussions on equity-related topics.

Keywords: Accounting, DEI, Layoffs, Blockchain

Suggested Citation: Suggested Citation

Stephanie Miller (Contact Author)

Quinnipiac university school of business ( email ).

United States

Do you have a job opening that you would like to promote on SSRN?

Paper statistics, related ejournals, accounting education ejournal.

Subscribe to this fee journal for more curated articles on this topic

Help | Advanced Search

Computer Science > Machine Learning

Title: xlstmtime : long-term time series forecasting with xlstm.

Abstract: In recent years, transformer-based models have gained prominence in multivariate long-term time series forecasting (LTSF), demonstrating significant advancements despite facing challenges such as high computational demands, difficulty in capturing temporal dynamics, and managing long-term dependencies. The emergence of LTSF-Linear, with its straightforward linear architecture, has notably outperformed transformer-based counterparts, prompting a reevaluation of the transformer's utility in time series forecasting. In response, this paper presents an adaptation of a recent architecture termed extended LSTM (xLSTM) for LTSF. xLSTM incorporates exponential gating and a revised memory structure with higher capacity that has good potential for LTSF. Our adopted architecture for LTSF termed as xLSTMTime surpasses current approaches. We compare xLSTMTime's performance against various state-of-the-art models across multiple real-world da-tasets, demonstrating superior forecasting capabilities. Our findings suggest that refined recurrent architectures can offer competitive alternatives to transformer-based models in LTSF tasks, po-tentially redefining the landscape of time series forecasting.

Submission history

Access paper:.

• Other Formats

References & Citations

• Google Scholar
• Semantic Scholar

BibTeX formatted citation

Bibliographic and Citation Tools

Code, data and media associated with this article, recommenders and search tools.

• Institution

arXivLabs: experimental projects with community collaborators

arXivLabs is a framework that allows collaborators to develop and share new arXiv features directly on our website.

Both individuals and organizations that work with arXivLabs have embraced and accepted our values of openness, community, excellence, and user data privacy. arXiv is committed to these values and only works with partners that adhere to them.

Have an idea for a project that will add value for arXiv's community? Learn more about arXivLabs .