presentation layer wikipedia

• Engineering Mathematics
• Discrete Mathematics
• Operating System
• Computer Networks
• Digital Logic and Design
• C Programming
• Data Structures
• Theory of Computation
• Compiler Design
• Computer Org and Architecture
• Computer Network Tutorial

Basics of Computer Network

• Basics of Computer Networking
• Introduction to basic Networking Terminology
• Goals of Networks
• Basic characteristics of Computer Networks
• Challenges of Computer Network
• Physical Components of Computer Network

Network Hardware and Software

• Types of Computer Networks
• LAN Full Form
• How to Set Up a LAN Network?
• MAN Full Form in Computer Networking
• MAN Full Form
• WAN Full Form
• Introduction of Internetworking
• Difference between Internet, Intranet and Extranet
• Protocol Hierarchies in Computer Network
• Network Devices (Hub, Repeater, Bridge, Switch, Router, Gateways and Brouter)
• Introduction of a Router
• Introduction of Gateways
• What is a network switch, and how does it work?

Network Topology

• Types of Network Topology
• Difference between Physical and Logical Topology
• What is OSI Model? - Layers of OSI Model
• Physical Layer in OSI Model
• Data Link Layer
• Session Layer in OSI model

Presentation Layer in OSI model

• Application Layer in OSI Model
• Protocol and Standard in Computer Networks
• Examples of Data Link Layer Protocols
• TCP/IP Model
• TCP/IP Ports and Its Applications
• What is Transmission Control Protocol (TCP)?
• TCP 3-Way Handshake Process
• Services and Segment structure in TCP
• TCP Connection Establishment
• TCP Connection Termination
• Fast Recovery Technique For Loss Recovery in TCP
• Difference Between OSI Model and TCP/IP Model

Medium Access Control

• MAC Full Form
• Channel Allocation Problem in Computer Network
• Multiple Access Protocols in Computer Network
• Carrier Sense Multiple Access (CSMA)
• Collision Detection in CSMA/CD
• Controlled Access Protocols in Computer Network

SLIDING WINDOW PROTOCOLS

• Stop and Wait ARQ
• Sliding Window Protocol | Set 3 (Selective Repeat)
• Piggybacking in Computer Networks

IP Addressing

• What is IPv4?
• What is IPv6?
• Introduction of Classful IP Addressing
• Classless Addressing in IP Addressing
• Classful Vs Classless Addressing
• Classless Inter Domain Routing (CIDR)
• Supernetting in Network Layer
• Introduction To Subnetting
• Difference between Subnetting and Supernetting
• Types of Routing
• Difference between Static and Dynamic Routing
• Unicast Routing - Link State Routing
• Distance Vector Routing (DVR) Protocol
• Fixed and Flooding Routing algorithms
• Introduction of Firewall in Computer Network

Congestion Control Algorithms

• Congestion Control in Computer Networks
• Congestion Control techniques in Computer Networks
• Computer Network | Leaky bucket algorithm
• TCP Congestion Control

Network Switching

• Circuit Switching in Computer Network
• Message switching techniques
• Packet Switching and Delays in Computer Network
• Differences Between Virtual Circuits and Datagram Networks

Application Layer:DNS

• Domain Name System (DNS) in Application Layer
• Details on DNS
• Introduction to Electronic Mail
• E-Mail Format
• World Wide Web (WWW)
• HTTP Full Form
• Streaming Stored Video
• What is a Content Distribution Network and how does it work?

CN Interview Quetions

• Top 50 Networking Interview Questions (2024)
• Top 50 TCP/IP interview questions and answers
• Top 50 IP addressing interview questions and answers
• Last Minute Notes - Computer Networks
• Computer Network - Cheat Sheet
• Network Layer
• Transport Layer
• Application Layer

Prerequisite : OSI Model

Introduction : Presentation Layer is the 6th layer in the Open System Interconnection (OSI) model. This layer is also known as Translation layer, as this layer serves as a data translator for the network. The data which this layer receives from the Application Layer is extracted and manipulated here as per the required format to transmit over the network. The main responsibility of this layer is to provide or define the data format and encryption. The presentation layer is also called as Syntax layer since it is responsible for maintaining the proper syntax of the data which it either receives or transmits to other layer(s).

Functions of Presentation Layer :

The presentation layer, being the 6th layer in the OSI model, performs several types of functions, which are described below-

• Presentation layer format and encrypts data to be sent across the network.
• This layer takes care that the data is sent in such a way that the receiver will understand the information (data) and will be able to use the data efficiently and effectively.
• This layer manages the abstract data structures and allows high-level data structures (example- banking records), which are to be defined or exchanged.
• This layer carries out the encryption at the transmitter and decryption at the receiver.
• This layer carries out data compression to reduce the bandwidth of the data to be transmitted (the primary goal of data compression is to reduce the number of bits which is to be transmitted).
• This layer is responsible for interoperability (ability of computers to exchange and make use of information) between encoding methods as different computers use different encoding methods.
• This layer basically deals with the presentation part of the data.
• Presentation layer, carries out the data compression (number of bits reduction while transmission), which in return improves the data throughput.
• This layer also deals with the issues of string representation.
• The presentation layer is also responsible for integrating all the formats into a standardized format for efficient and effective communication.
• This layer encodes the message from the user-dependent format to the common format and vice-versa for communication between dissimilar systems.
• This layer deals with the syntax and semantics of the messages.
• This layer also ensures that the messages which are to be presented to the upper as well as the lower layer should be standardized as well as in an accurate format too.
• Presentation layer is also responsible for translation, formatting, and delivery of information for processing or display.
• This layer also performs serialization (process of translating a data structure or an object into a format that can be stored or transmitted easily).

Features of Presentation Layer in the OSI model: Presentation layer, being the 6th layer in the OSI model, plays a vital role while communication is taking place between two devices in a network.

List of features which are provided by the presentation layer are:

• Presentation layer could apply certain sophisticated compression techniques, so fewer bytes of data are required to represent the information when it is sent over the network.
• If two or more devices are communicating over an encrypted connection, then this presentation layer is responsible for adding encryption on the sender’s end as well as the decoding the encryption on the receiver’s end so that it can represent the application layer with unencrypted, readable data.
• This layer formats and encrypts data to be sent over a network, providing freedom from compatibility problems.
• This presentation layer also negotiates the Transfer Syntax.
• This presentation layer is also responsible for compressing data it receives from the application layer before delivering it to the session layer (which is the 5th layer in the OSI model) and thus improves the speed as well as the efficiency of communication by minimizing the amount of the data to be transferred.

Working of Presentation Layer in the OSI model : Presentation layer in the OSI model, as a translator, converts the data sent by the application layer of the transmitting node into an acceptable and compatible data format based on the applicable network protocol and architecture.  Upon arrival at the receiving computer, the presentation layer translates data into an acceptable format usable by the application layer. Basically, in other words, this layer takes care of any issues occurring when transmitted data must be viewed in a format different from the original format. Being the functional part of the OSI mode, the presentation layer performs a multitude (large number of) data conversion algorithms and character translation functions. Mainly, this layer is responsible for managing two network characteristics: protocol (set of rules) and architecture.

Presentation Layer Protocols : Presentation layer being the 6th layer, but the most important layer in the OSI model performs several types of functionalities, which makes sure that data which is being transferred or received should be accurate or clear to all the devices which are there in a closed network. Presentation Layer, for performing translations or other specified functions, needs to use certain protocols which are defined below –

• Apple Filing Protocol (AFP): Apple Filing Protocol is the proprietary network protocol (communications protocol) that offers services to macOS or the classic macOS. This is basically the network file control protocol specifically designed for Mac-based platforms.
• Lightweight Presentation Protocol (LPP): Lightweight Presentation Protocol is that protocol which is used to provide ISO presentation services on the top of TCP/IP based protocol stacks.
• NetWare Core Protocol (NCP): NetWare Core Protocol is the network protocol which is used to access file, print, directory, clock synchronization, messaging, remote command execution and other network service functions.
• Network Data Representation (NDR): Network Data Representation is basically the implementation of the presentation layer in the OSI model, which provides or defines various primitive data types, constructed data types and also several types of data representations.
• External Data Representation (XDR): External Data Representation (XDR) is the standard for the description and encoding of data. It is useful for transferring data between computer architectures and has been used to communicate data between very diverse machines. Converting from local representation to XDR is called encoding, whereas converting XDR into local representation is called decoding.
• Secure Socket Layer (SSL): The Secure Socket Layer protocol provides security to the data that is being transferred between the web browser and the server. SSL encrypts the link between a web server and a browser, which ensures that all data passed between them remains private and free from attacks.

Please Login to comment...

Similar reads.

Improve your Coding Skills with Practice

What kind of Experience do you want to share?

The OSI Model – The 7 Layers of Networking Explained in Plain English

This article explains the Open Systems Interconnection (OSI) model and the 7 layers of networking, in plain English.

The OSI model is a conceptual framework that is used to describe how a network functions. In plain English, the OSI model helped standardize the way computer systems send information to each other.

Learning networking is a bit like learning a language - there are lots of standards and then some exceptions. Therefore, it’s important to really understand that the OSI model is not a set of rules. It is a tool for understanding how networks function.

Once you learn the OSI model, you will be able to further understand and appreciate this glorious entity we call the Internet, as well as be able to troubleshoot networking issues with greater fluency and ease.

All hail the Internet!

Prerequisites

You don’t need any prior programming or networking experience to understand this article. However, you will need:

• Basic familiarity with common networking terms (explained below)
• A curiosity about how things work :)

Learning Objectives

Over the course of this article, you will learn:

• What the OSI model is
• The purpose of each of the 7 layers
• The problems that can happen at each of the 7 layers
• The difference between TCP/IP model and the OSI model

Common Networking Terms

Here are some common networking terms that you should be familiar with to get the most out of this article. I’ll use these terms when I talk about OSI layers next.

A node is a physical electronic device hooked up to a network, for example a computer, printer, router, and so on. If set up properly, a node is capable of sending and/or receiving information over a network.

Nodes may be set up adjacent to one other, wherein Node A can connect directly to Node B, or there may be an intermediate node, like a switch or a router, set up between Node A and Node B.

Typically, routers connect networks to the Internet and switches operate within a network to facilitate intra-network communication. Learn more about hub vs. switch vs. router.

Here's an example:

For the nitpicky among us (yep, I see you), host is another term that you will encounter in networking. I will define a host as a type of node that requires an IP address. All hosts are nodes, but not all nodes are hosts. Please Tweet angrily at me if you disagree.

Links connect nodes on a network. Links can be wired, like Ethernet, or cable-free, like WiFi.

Links to can either be point-to-point, where Node A is connected to Node B, or multipoint, where Node A is connected to Node B and Node C.

When we’re talking about information being transmitted, this may also be described as a one-to-one vs. a one-to-many relationship.

A protocol is a mutually agreed upon set of rules that allows two nodes on a network to exchange data.

“A protocol defines the rules governing the syntax (what can be communicated), semantics (how it can be communicated), and synchronization (when and at what speed it can be communicated) of the communications procedure. Protocols can be implemented on hardware, software, or a combination of both. Protocols can be created by anyone, but the most widely adopted protocols are based on standards.” - The Illustrated Network.

Both wired and cable-free links can have protocols.

While anyone can create a protocol, the most widely adopted protocols are often based on standards published by Internet organizations such as the Internet Engineering Task Force (IETF).

A network is a general term for a group of computers, printers, or any other device that wants to share data.

Network types include LAN, HAN, CAN, MAN, WAN, BAN, or VPN. Think I’m just randomly rhyming things with the word can ? I can ’t say I am - these are all real network types. Learn more here .

Topology describes how nodes and links fit together in a network configuration, often depicted in a diagram. Here are some common network topology types:

A network consists of nodes, links between nodes, and protocols that govern data transmission between nodes.

At whatever scale and complexity networks get to, you will understand what’s happening in all computer networks by learning the OSI model and 7 layers of networking.

What is the OSI Model?

The OSI model consists of 7 layers of networking.

First, what’s a layer?

No, a layer - not a lair . Here there are no dragons.

A layer is a way of categorizing and grouping functionality and behavior on and of a network.

In the OSI model, layers are organized from the most tangible and most physical, to less tangible and less physical but closer to the end user.

Each layer abstracts lower level functionality away until by the time you get to the highest layer. All the details and inner workings of all the other layers are hidden from the end user.

How to remember all the names of the layers? Easy.

• Please | Physical Layer
• Do | Data Link Layer
• Not | Network Layer
• Tell (the) | Transport Layer
• Secret | Session Layer
• Password (to) | Presentation Layer
• Anyone | Application Layer

Keep in mind that while certain technologies, like protocols, may logically “belong to” one layer more than another, not all technologies fit neatly into a single layer in the OSI model. For example, Ethernet, 802.11 (Wifi) and the Address Resolution Protocol (ARP) procedure operate on >1 layer.

The OSI is a model and a tool, not a set of rules.

OSI Layer 1

Layer 1 is the physical layer . There’s a lot of technology in Layer 1 - everything from physical network devices, cabling, to how the cables hook up to the devices. Plus if we don’t need cables, what the signal type and transmission methods are (for example, wireless broadband).

Instead of listing every type of technology in Layer 1, I’ve created broader categories for these technologies. I encourage readers to learn more about each of these categories:

• Nodes (devices) and networking hardware components. Devices include hubs, repeaters, routers, computers, printers, and so on. Hardware components that live inside of these devices include antennas, amplifiers, Network Interface Cards (NICs), and more.
• Device interface mechanics. How and where does a cable connect to a device (cable connector and device socket)? What is the size and shape of the connector, and how many pins does it have? What dictates when a pin is active or inactive?
• Functional and procedural logic. What is the function of each pin in the connector - send or receive? What procedural logic dictates the sequence of events so a node can start to communicate with another node on Layer 2?
• Cabling protocols and specifications. Ethernet (CAT), USB, Digital Subscriber Line (DSL) , and more. Specifications include maximum cable length, modulation techniques, radio specifications, line coding, and bits synchronization (more on that below).
• Cable types. Options include shielded or unshielded twisted pair, untwisted pair, coaxial and so on. Learn more about cable types here .
• Signal type. Baseband is a single bit stream at a time, like a railway track - one-way only. Broadband consists of multiple bit streams at the same time, like a bi-directional highway.
• Signal transmission method (may be wired or cable-free). Options include electrical (Ethernet), light (optical networks, fiber optics), radio waves (802.11 WiFi, a/b/g/n/ac/ax variants or Bluetooth). If cable-free, then also consider frequency: 2.5 GHz vs. 5 GHz. If it’s cabled, consider voltage. If cabled and Ethernet, also consider networking standards like 100BASE-T and related standards.

The data unit on Layer 1 is the bit.

A bit the smallest unit of transmittable digital information. Bits are binary, so either a 0 or a 1. Bytes, consisting of 8 bits, are used to represent single characters, like a letter, numeral, or symbol.

Bits are sent to and from hardware devices in accordance with the supported data rate (transmission rate, in number of bits per second or millisecond) and are synchronized so the number of bits sent and received per unit of time remains consistent (this is called bit synchronization). The way bits are transmitted depends on the signal transmission method.

Nodes can send, receive, or send and receive bits. If they can only do one, then the node uses a simplex mode. If they can do both, then the node uses a duplex mode. If a node can send and receive at the same time, it’s full-duplex – if not, it’s just half-duplex.

The original Ethernet was half-duplex. Full-duplex Ethernet is an option now, given the right equipment.

How to Troubleshoot OSI Layer 1 Problems

Here are some Layer 1 problems to watch out for:

• Defunct cables, for example damaged wires or broken connectors
• Broken hardware network devices, for example damaged circuits
• Stuff being unplugged (...we’ve all been there)

If there are issues in Layer 1, anything beyond Layer 1 will not function properly.

Layer 1 contains the infrastructure that makes communication on networks possible.

It defines the electrical, mechanical, procedural, and functional specifications for activating, maintaining, and deactivating physical links between network devices. - Source

Fun fact: deep-sea communications cables transmit data around the world. This map will blow your mind: https://www.submarinecablemap.com/

And because you made it this far, here’s a koala:

OSI Layer 2

Layer 2 is the data link layer . Layer 2 defines how data is formatted for transmission, how much data can flow between nodes, for how long, and what to do when errors are detected in this flow.

In more official tech terms:

• Line discipline. Who should talk for how long? How long should nodes be able to transit information for?
• Flow control. How much data should be transmitted?
• Error control - detection and correction . All data transmission methods have potential for errors, from electrical spikes to dirty connectors. Once Layer 2 technologies tell network administrators about an issue on Layer 2 or Layer 1, the system administrator can correct for those errors on subsequent layers. Layer 2 is mostly concerned with error detection, not error correction. ( Source )

There are two distinct sublayers within Layer 2:

• Media Access Control (MAC): the MAC sublayer handles the assignment of a hardware identification number, called a MAC address, that uniquely identifies each device on a network. No two devices should have the same MAC address. The MAC address is assigned at the point of manufacturing. It is automatically recognized by most networks. MAC addresses live on Network Interface Cards (NICs). Switches keep track of all MAC addresses on a network. Learn more about MAC addresses on PC Mag and in this article . Learn more about network switches here .
• Logical Link Control (LLC): the LLC sublayer handles framing addressing and flow control. The speed depends on the link between nodes, for example Ethernet or Wifi.

The data unit on Layer 2 is a frame .

Each frame contains a frame header, body, and a frame trailer:

• Header: typically includes MAC addresses for the source and destination nodes.
• Body: consists of the bits being transmitted.
• Trailer: includes error detection information. When errors are detected, and depending on the implementation or configuration of a network or protocol, frames may be discarded or the error may be reported up to higher layers for further error correction. Examples of error detection mechanisms: Cyclic Redundancy Check (CRC) and Frame Check Sequence (FCS). Learn more about error detection techniques here .

Typically there is a maximum frame size limit, called an Maximum Transmission Unit, MTU. Jumbo frames exceed the standard MTU, learn more about jumbo frames here .

How to Troubleshoot OSI Layer 2 Problems

Here are some Layer 2 problems to watch out for:

• All the problems that can occur on Layer 1
• Unsuccessful connections (sessions) between two nodes
• Sessions that are successfully established but intermittently fail
• Frame collisions

The Data Link Layer allows nodes to communicate with each other within a local area network. The foundations of line discipline, flow control, and error control are established in this layer.

OSI Layer 3

Layer 3 is the network layer . This is where we send information between and across networks through the use of routers. Instead of just node-to-node communication, we can now do network-to-network communication.

Routers are the workhorse of Layer 3 - we couldn’t have Layer 3 without them. They move data packets across multiple networks.

Not only do they connect to Internet Service Providers (ISPs) to provide access to the Internet, they also keep track of what’s on its network (remember that switches keep track of all MAC addresses on a network), what other networks it’s connected to, and the different paths for routing data packets across these networks.

Routers store all of this addressing and routing information in routing tables.

Here’s a simple example of a routing table:

The data unit on Layer 3 is the data packet . Typically, each data packet contains a frame plus an IP address information wrapper. In other words, frames are encapsulated by Layer 3 addressing information.

The data being transmitted in a packet is also sometimes called the payload . While each packet has everything it needs to get to its destination, whether or not it makes it there is another story.

Layer 3 transmissions are connectionless, or best effort - they don't do anything but send the traffic where it’s supposed to go. More on data transport protocols on Layer 4.

Once a node is connected to the Internet, it is assigned an Internet Protocol (IP) address, which looks either like 172.16. 254.1 (IPv4 address convention) or like 2001:0db8:85a3:0000:0000:8a2e:0370:7334 (IPv6 address convention). Routers use IP addresses in their routing tables.

IP addresses are associated with the physical node’s MAC address via the Address Resolution Protocol (ARP), which resolves MAC addresses with the node’s corresponding IP address.

ARP is conventionally considered part of Layer 2, but since IP addresses don’t exist until Layer 3, it’s also part of Layer 3.

How to Troubleshoot OSI Layer 3 Problems

Here are some Layer 3 problems to watch out for:

• All the problems that can crop up on previous layers :)
• Faulty or non-functional router or other node
• IP address is incorrectly configured

Many answers to Layer 3 questions will require the use of command-line tools like ping , trace , show ip route , or show ip protocols . Learn more about troubleshooting on layer 1-3 here .

The Network Layer allows nodes to connect to the Internet and send information across different networks.

OSI Layer 4

Layer 4 is the transport layer . This where we dive into the nitty gritty specifics of the connection between two nodes and how information is transmitted between them. It builds on the functions of Layer 2 - line discipline, flow control, and error control.

This layer is also responsible for data packet segmentation, or how data packets are broken up and sent over the network.

Unlike the previous layer, Layer 4 also has an understanding of the whole message, not just the contents of each individual data packet. With this understanding, Layer 4 is able to manage network congestion by not sending all the packets at once.

The data units of Layer 4 go by a few names. For TCP, the data unit is a packet. For UDP, a packet is referred to as a datagram. I’ll just use the term data packet here for the sake of simplicity.

Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) are two of the most well-known protocols in Layer 4.

TCP, a connection-oriented protocol, prioritizes data quality over speed.

TCP explicitly establishes a connection with the destination node and requires a handshake between the source and destination nodes when data is transmitted. The handshake confirms that data was received. If the destination node does not receive all of the data, TCP will ask for a retry.

TCP also ensures that packets are delivered or reassembled in the correct order. Learn more about TCP here .

UDP, a connectionless protocol, prioritizes speed over data quality. UDP does not require a handshake, which is why it’s called connectionless.

Because UDP doesn’t have to wait for this acknowledgement, it can send data at a faster rate, but not all of the data may be successfully transmitted and we’d never know.

If information is split up into multiple datagrams, unless those datagrams contain a sequence number, UDP does not ensure that packets are reassembled in the correct order. Learn more about UDP here .

TCP and UDP both send data to specific ports on a network device, which has an IP address. The combination of the IP address and the port number is called a socket.

Learn more about sockets here .

Learn more about the differences and similarities between these two protocols here .

How to Troubleshoot OSI Layer 4 Problems

Here are some Layer 4 problems to watch out for:

• Blocked ports - check your Access Control Lists (ACL) & firewalls
• Quality of Service (QoS) settings. QoS is a feature of routers/switches that can prioritize traffic, and they can really muck things up. Learn more about QoS here .

The Transport Layer provides end-to-end transmission of a message by segmenting a message into multiple data packets; the layer supports connection-oriented and connectionless communication.

OSI Layer 5

Layer 5 is the session layer . This layer establishes, maintains, and terminates sessions.

A session is a mutually agreed upon connection that is established between two network applications. Not two nodes! Nope, we’ve moved on from nodes. They were so Layer 4.

Just kidding, we still have nodes, but Layer 5 doesn’t need to retain the concept of a node because that’s been abstracted out (taken care of) by previous layers.

So a session is a connection that is established between two specific end-user applications. There are two important concepts to consider here:

• Client and server model: the application requesting the information is called the client, and the application that has the requested information is called the server.
• Request and response model: while a session is being established and during a session, there is a constant back-and-forth of requests for information and responses containing that information or “hey, I don’t have what you’re requesting.”

Sessions may be open for a very short amount of time or a long amount of time. They may fail sometimes, too.

Depending on the protocol in question, various failure resolution processes may kick in. Depending on the applications/protocols/hardware in use, sessions may support simplex, half-duplex, or full-duplex modes.

Examples of protocols on Layer 5 include Network Basic Input Output System (NetBIOS) and Remote Procedure Call Protocol (RPC), and many others.

From here on out (layer 5 and up), networks are focused on ways of making connections to end-user applications and displaying data to the user.

How to Troubleshoot OSI Layer 5 Problems

Here are some Layer 5 problems to watch out for:

• Servers are unavailable
• Servers are incorrectly configured, for example Apache or PHP configs
• Session failure - disconnect, timeout, and so on.

The Session Layer initiates, maintains, and terminates connections between two end-user applications. It responds to requests from the presentation layer and issues requests to the transport layer.

OSI Layer 6

Layer 6 is the presentation layer . This layer is responsible for data formatting, such as character encoding and conversions, and data encryption.

The operating system that hosts the end-user application is typically involved in Layer 6 processes. This functionality is not always implemented in a network protocol.

Layer 6 makes sure that end-user applications operating on Layer 7 can successfully consume data and, of course, eventually display it.

There are three data formatting methods to be aware of:

• American Standard Code for Information Interchange (ASCII): this 7-bit encoding technique is the most widely used standard for character encoding. One superset is ISO-8859-1, which provides most of the characters necessary for languages spoken in Western Europe.
• Extended Binary-Coded Decimal Interchange Code (EBDCIC): designed by IBM for mainframe usage. This encoding is incompatible with other character encoding methods.
• Unicode: character encodings can be done with 32-, 16-, or 8-bit characters and attempts to accommodate every known, written alphabet.

Learn more about character encoding methods in this article , and also here .

Encryption: SSL or TLS encryption protocols live on Layer 6. These encryption protocols help ensure that transmitted data is less vulnerable to malicious actors by providing authentication and data encryption for nodes operating on a network. TLS is the successor to SSL.

How to Troubleshoot OSI Layer 6 Problems

Here are some Layer 6 problems to watch out for:

• Non-existent or corrupted drivers
• Incorrect OS user access level

The Presentation Layer formats and encrypts data.

OSI Layer 7

Layer 7 is the application layer .

True to its name, this is the layer that is ultimately responsible for supporting services used by end-user applications. Applications include software programs that are installed on the operating system, like Internet browsers (for example, Firefox) or word processing programs (for example, Microsoft Word).

Applications can perform specialized network functions under the hood and require specialized services that fall under the umbrella of Layer 7.

Electronic mail programs, for example, are specifically created to run over a network and utilize networking functionality, such as email protocols, which fall under Layer 7.

Applications will also control end-user interaction, such as security checks (for example, MFA), identification of two participants, initiation of an exchange of information, and so on.

Protocols that operate on this level include File Transfer Protocol (FTP), Secure Shell (SSH), Simple Mail Transfer Protocol (SMTP), Internet Message Access Protocol (IMAP), Domain Name Service (DNS), and Hypertext Transfer Protocol (HTTP).

While each of these protocols serve different functions and operate differently, on a high level they all facilitate the communication of information. ( Source )

How to Troubleshoot OSI Layer 7 Problems

Here are some Layer 7 problems to watch out for:

• All issues on previous layers
• Incorrectly configured software applications
• User error (... we’ve all been there)

The Application Layer owns the services and functions that end-user applications need to work. It does not include the applications themselves.

Our Layer 1 koala is all grown up.

Learning check - can you apply makeup to a koala?

Don’t have a koala?

Well - answer these questions instead. It’s the next best thing, I promise.

• What is the OSI model?
• What are each of the layers?
• How could I use this information to troubleshoot networking issues?

Congratulations - you’ve taken one step farther to understanding the glorious entity we call the Internet.

Learning Resources

Many, very smart people have written entire books about the OSI model or entire books about specific layers. I encourage readers to check out any O’Reilly-published books about the subject or about network engineering in general.

Here are some resources I used when writing this article:

• The Illustrated Network, 2nd Edition
• Protocol Data Unit (PDU): https://www.geeksforgeeks.org/difference-between-segments-packets-and-frames/
• Troubleshooting Along the OSI Model: https://www.pearsonitcertification.com/articles/article.aspx?p=1730891
• The OSI Model Demystified: https://www.youtube.com/watch?v=HEEnLZV2wGI
• OSI Model for Dummies: https://www.dummies.com/programming/networking/layers-in-the-osi-model-of-a-computer-network/

Chloe Tucker is an artist and computer science enthusiast based in Portland, Oregon. As a former educator, she's continuously searching for the intersection of learning and teaching, or technology and art. Reach out to her on Twitter @_chloetucker and check out her website at chloe.dev .

Read more posts .

If you read this far, thank the author to show them you care. Say Thanks

Learn to code for free. freeCodeCamp's open source curriculum has helped more than 40,000 people get jobs as developers. Get started

  Layer 6 Presentation Layer

De/Encryption, Encoding, String representation

The presentation layer (data presentation layer, data provision level) sets the system-dependent representation of the data (for example, ASCII, EBCDIC) into an independent form, enabling the syntactically correct data exchange between different systems. Also, functions such as data compression and encryption are guaranteed that data to be sent by the application layer of a system that can be read by the application layer of another system to the layer 6. The presentation layer. If necessary, the presentation layer acts as a translator between different data formats, by making an understandable for both systems data format, the ASN.1 (Abstract Syntax Notation One) used.

OSI Layer 6 - Presentation Layer

The presentation layer is responsible for the delivery and formatting of information to the application layer for further processing or display. It relieves the application layer of concern regarding syntactical differences in data representation within the end-user systems. An example of a presentation service would be the conversion of an EBCDIC-coded text computer file to an ASCII-coded file. The presentation layer is the lowest layer at which application programmers consider data structure and presentation, instead of simply sending data in the form of datagrams or packets between hosts. This layer deals with issues of string representation - whether they use the Pascal method (an integer length field followed by the specified amount of bytes) or the C/C++ method (null-terminated strings, e.g. "thisisastring\0"). The idea is that the application layer should be able to point at the data to be moved, and the presentation layer will deal with the rest. Serialization of complex data structures into flat byte-strings (using mechanisms such as TLV or XML) can be thought of as the key functionality of the presentation layer. Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.[1] Another example is representing structure, which is normally standardized at this level, often by using XML. As well as simple pieces of data, like strings, more complicated things are standardized in this layer. Two common examples are 'objects' in object-oriented programming, and the exact way that streaming video is transmitted. In many widely used applications and protocols, no distinction is made between the presentation and application layers. For example, HyperText Transfer Protocol (HTTP), generally regarded as an application-layer protocol, has presentation-layer aspects such as the ability to identify character encoding for proper conversion, which is then done in the application layer. Within the service layering semantics of the OSI network architecture, the presentation layer responds to service requests from the application layer and issues service requests to the session layer. In the OSI model: the presentation layer ensures the information that the application layer of one system sends out is readable by the application layer of another system. For example, a PC program communicates with another computer, one using extended binary coded decimal interchange code (EBCDIC) and the other using ASCII to represent the same characters. If necessary, the presentation layer might be able to translate between multiple data formats by using a common format. Wikipedia

• Data conversion
• Character code translation
• Compression
• Encryption and Decryption

The Presentation OSI Layer is usually composed of 2 sublayers that are:

CASE common application service element

Sase specific application service element, layer 7   application layer, layer 6   presentation layer, layer 5   session layer, layer 4   transport layer, layer 3   network layer, layer 2   data link layer, layer 1   physical layer.

Presentation Layer

Last Edited

What is the Presentation Layer?

Presentation Layer is the Layer 6 of the seven-layer Open Systems Interconnection (OSI) reference model . The presentation layer structures data that is passed down from the application layer into a format suitable for network transmission. This layer is responsible for data encryption, data compression, character set conversion, interpretation of graphics commands, and so on. The network redirector also functions at this layer.

Presentation Layer functions

• Translation:  Before being transmitted, information in the form of characters and numbers should be changed to bit streams. Layer 6 is responsible for interoperability between encoding methods as different computers use different encoding methods. It translates data between the formats the network requires and the format the computer.
• Encryption:  Encryption at the transmitter and decryption at the receiver
• Compression:  Data compression to reduce the bandwidth of the data to be transmitted. The primary role of  data compression  is to reduce the number of bits to be transmitted. Multimedia files, such as audio and video, are bigger than text files and compression is more important.

Role of Presentation Layer in the OSI Model

This layer is not always used in network communications because its functions are not always necessary. Translation is only needed if different types of machines need to talk with each other. Encryption is optional in communication. If the information is public there is no need to encrypt and decrypt info. Compression is also optional. If files are small there is no need for compression.

Explaining Layer 6 in video

Most real-world protocol suites, such as TCP/IP , do not use separate presentation layer protocols. This layer is mostly an abstraction in real-world networking.

An example of a program that loosely adheres to layer 6 of OSI is the tool that manages the Hypertext Transfer Protocol (HTTP) — although it’s technically considered an application-layer protocol per the TCP/IP model.

However, HTTP includes presentation layer services within it. HTTP works when the requesting device forwards user requests passed to the web browser onto a web server elsewhere in the network.

It receives a return message from the web server that includes a multipurpose internet mail extensions (MIME) header. The MIME header indicates the type of file – text, video, or audio – that has been received so that an appropriate player utility can be used to present the file to the user.

In short, the presentation layer

Makes sure that data which is being transferred or received should be accurate or clear to all the devices which are there, in a closed network.

• ensures proper formatting and delivery to and from the application layer;
• performs data encryption; and
• manages serialization of data objects.

• Network Fundamentals
• Network Cabling
• Ethernet Protocol
• TCP-UDP Protocol
• IP Protocol
• Supernetting & CIDR
• ICMP Protocol
• Domain Name System (DNS)
• Spanning Tree Protocol (STP)
• VLAN Networks
• Network Address Translation
• Cisco Routers
• Cisco Switches
• Cisco Firewalls
• Cisco Wireless
• Cisco CallManager-CCME
• Cisco Data Center (Nexus/UCS)
• Cisco Services & Technologies
• Palo Alto Networks
• F5 Networks
• Microsoft 365 Security
• SASE & SD-WAN
• Security Service Edge (SSE)
• Web Application Vulnerability Scanners
• VPN Services & Guides
• Windows Servers
• Windows Workstations (XP, 7, 8, 10, 11)
• Linux - Unix
• Virtualization & VM Backup
• OpManager - Network Monitoring & Management
• ManageEngine Firewall Analyzer

EventLog Analyzer

• Network Protocol Analyzers
• IP PBX - Unified Communications
• Security Articles
• Reviews & Interviews
• GFI Network Security
• OpenMosix - Linux Supercomputer
• More Reading

All-in-one protection

Free Download

Ransomware protection.

Download Now!

Free Download!

Get 2 vms for free.

Manage your Network!

The osi model: layer 6 - presentation layer.

The Presentation Layer gets its name from its purpose: It presents data to the Application layer. It's basically a translator and provides coding and conversion functions. A successful data transfer technique is to adapt the data into a standard format before transmission. Computers are configured to receive this generically formatted data and then convert the data back into its native format for reading. By providing translation services, the Presentation layer ensures that data transferred from the Application layer of one system can be read by the Application layer of another host.

JPEG: The Joint Photographic Experts Group brings these photo standards to us.

MIDI: The Musical Intrument Digital Interface is used for digitized music.

MPEG: The Moving Pictures Experts Group's standard for the compression and coding of motion video for CD's is very popular.

QuickTime: This is for use with Machintosh or Power PC programs, it manages audio and video applications.

The last 3 layers of the OSI model are reffered to the "Upper" layers. These layers are responsible for applications communicating between hosts. None of the upper layers know anything about networking or network addresses.

There are no protocols which work specificly at the Presentation layer, but the protocols which work at the Application layer are said to work on all 3 upper layers.

Next:   The OSI Model: Layer 7 - Application Layer

Your IP address:

81.177.182.159

• All-in-one protection for Microsoft 365

FREE Hyper-V & VMware Backup

Wi-Fi Key Generator

Follow firewall.cx.

Please enable the javascript to submit this form

Network and Server Monitoring

Recommended Downloads

• Network Management - Monitor & Alert
• Free Hyper-V & VMware Backup

Bandwidth Monitor

• Patch Manager Plus

Firewall Analyzer

Cisco password crack.

Decrypt Cisco Type-7 Passwords on the fly!

Decrypt Now!

Free PatchManager

Security Podcast

Related Articles

Data encapsulation & decapsulation in the osi model, the osi model: layer 5 - session layer, the osi model: layer 7 - application layer, the osi model: layer 2 - datalink layer, the osi model: layer 4 - transport layer.

Presentation Layer Of OSI Model For Beginners

Presentation Layer:

Presentation Layer is the sixth layer in the OSI model and here are some of the functionalities of the presentation layer:

Translation

Before being transmitted, the data remains in the form of characters and numbers. This data has to be changed to bitstreams before transmission. The presentation layer is responsible for interoperability between encoding methods as different computers use different encoding methods. It translates data between the formats that a network requires and the format a computer needs.

It carries out the process of encryption at the transmitter end and the process of decryption at the receiver end.

Encryption and decryption are ways to protect the confidentiality of the data stored on computer systems or wired over the internet or other computer networks.

Also Read:   Network Layer Of OSI Mode: Functionalities and Protocols

In terms of security, modern-day encryption methods play a vital role in the security assurance of IT systems and communications as they can provide not only confidentiality but also,  authentication and integrity.

Data compression

Data compression is also known by different names like source coding or bit-rate reduction. As evident from these names, data compression involves encoding information using fewer bits than the original representation. So in this way, the data compression can be either lossy or lossless.

Even though lossless compression reduces bits by identifying and eliminating statistical redundancy, no data information is lost in the lossless compression.

On the other hand, the lossy compression reduces bits by identifying unnecessary information and removing it.

Data compression is useful in computer networks because it helps in the following ways:

• Reducing resource usages such as data storage space or transmission capacity. B
• Reducing the need for an expensive hardware for the data representation. For example, if a video is highly compressed before transmission, an expensive hardware might be required to decompress the video data before playing it.

Thus, data compression is also very helpful in real-time applications over the internet like real-time video or audio streaming.

Data conversion

There are different types of operating systems such as Windows, Linux, Mac OS etc. are being used all around the world. Data conversion is, thus, responsible for the conversion of computer data from one format to another.

Different computers encode data in different ways on the basis of certain standards. On top of that, each computer program handles data in a different manner. Data conversion comes in handy in those situations when the representation of data is needed on different platforms.

The presentation layer can be composed of two sublayers: common application service element (CASE) and specific application service element (SASE).

Also Read:   LLC Layer (Logical Link Control): Data Link Layer Of OSI Model

The common application service element sublayer provides services for the application layer and request services from the session layer. It provides support for common application services whereas the specific application service element sublayer provides application specific services (protocols) like remote database access, file transfer, virtual terminal.

If you have any comments or thoughts related to it, feel free to ask and correct us. Also, don’t miss our complete coverage on the Computer networks .

A passionate adventure traveller over Trekkerpedia.com and Author of the book 'The Girl from the Woods'.

Similar Posts

5 Big Tech Companies Hiring In 2023

Get ready with your resume and start applying.

Is Putting A Case On Your MacBook A Good Idea?

After splurging over $1,000 on a shiny new MacBook, safeguarding it from scratches and drops becomes…

NVIDIA ShadowPlay: What Is It And How To Use It?

Flex your gameplay moments with ease!

What is the Blue Screen of Death in Windows – The Complete Guide

Short Bytes: Blue Screen of Death or BSOD is an error message displayed on Windows machines…

Force Peak Refresh Rate In Developer Options: How To Make Your Android Display Run Smoother?

High refresh rate displays on smartphones have quickly become a key buying factor, thanks in part…

What Is A Router? Here’s Everything You Need To Know

Got your first internet connection? Here’s what you need to know about Routers.

Unveiling the Interpreter: Fortifying the Presentation Layer’s Role in Cybersecurity

• March 28, 2024

Cherise Esparza

Welcome back to Tea with C. As we navigate deeper into the OSI model, today’s spotlight shines on Layer 6: the Presentation Layer. The Presentation Layer, often likened to an adept interpreter in the digital realm, plays a pivotal role in the seamless transmission and reception of data across the network.

At its essence, the Presentation Layer is tasked with data translation, encryption, and compression. It ensures that the information sent from the application layer is suitably formatted for transmission across the network and can be accurately interpreted by the receiving system. This layer is a universal translator for network communications, bridging different data formats into a universally understood language.

Encryption protocols at this layer are vital for securing data at rest and in transit. They are the bedrock of data integrity and confidentiality, shielding sensitive information from prying eyes and potential cyber threats. This is where the magic of transforming data into a secure format occurs, making it an essential battleground for cybersecurity efforts.

However, the Presentation Layer is not without its vulnerabilities. Some of the most insidious security threats stem from weaknesses in the coding practices used to develop applications interacting at this layer. Buffer overflows, SQL injections, and cross-site scripting are prime examples of exploits that can lead to significant security breaches. These vulnerabilities underscore the critical importance of secure coding practices and robust input validation procedures to fend off attackers.

The roles vital to securing the Presentation Layer span a broad spectrum of cybersecurity expertise. Network security analysts play a key role in scrutinizing the data exchange protocols and ensuring that encryption measures are robust and correctly implemented. Developers adhere to a secure development lifecycle, ensuring that code is thoroughly vetted and sanitized before deployment. Lastly, the overarching vigilance of security analysts dedicated to network monitoring and logging forms the backbone of a comprehensive security strategy at this layer.

Ensuring the security of the Presentation Layer is a multifaceted challenge that requires a concerted effort from all parties involved in the development and deployment of network applications. As we gear up for our following discussion on the final layer of the OSI model , the Application Layer, remember that each layer presents unique challenges and opportunities for enhancing our cybersecurity posture. Join us next week as we conclude our exploration of the OSI model.

Share this post

Recent articles.

The Enhanced “Recover” Function in CSF 2.0: Bridging from 2018 to Modern Resilience

In the aftermath of a cybersecurity incident, an organization’s ability to recover and return to normal operations is crucial for its resilience and continuity. The

Evolving Cybersecurity Response: The “Respond” Function in CSF 2.0 Versus 2018

The capacity to respond effectively in a cybersecurity incident is critical for minimizing impact and restoring operations. The “Respond” function of the National Institute of

The Enhanced “Detect” Function in CSF 2.0: A Leap Forward from the 2018 Framework

In the evolving field of cybersecurity, the ability to quickly detect anomalies and cybersecurity events is crucial for maintaining the integrity of organizational assets. The

Fortifying Cybersecurity: Unpacking the Enhancements in CSF 2.0’s ‘Protect’ Function

The need for robust cybersecurity measures has never been more apparent in the rapidly advancing digital landscape. With cyber threats becoming increasingly sophisticated, the National

SecurityGate Unveils New Channel Program

HOUSTON, April 16, 2024 /PRNewswire/– SecurityGate, the provider of the leading SaaS platform for OT cyber improvement, is excited to announce the launch of its new

Deep Dive into the “Identify” Function: Transitioning from the 2018 Framework to CSF 2.0

Understanding an organization’s digital assets and systems in the ever-changing cybersecurity landscape is crucial to ensure effective security. The “Identify” function of the National Institute

5120 Woodway Dr. Suite 9003 Houston, TX 77056

SecurityGate c/o Talent Garden Calabiana Via Arcivescovo Calabiana, 6, 20139 Milano, Italy

• Privacy Policy
• Terms of Service
• Support Terms

Platform Tour

Channel program, case studies, the business of cyber series.