dyson v10 animal problem solving

• Cart £0.00 (0)

• Dyson 360 Eye
• Dyson Airwrap
• Battery Power Packs
• Dyson Filters
• Misc Dyson Parts
• Servicing & Repairs
• Dyson Supersonic Hair Dryer Repairs
• Dyson Airwrap Repairs
• Dyson Corrale Hair Straighteners Repairs
• Dyson Cordless Repairs by Post
• PAT Testing in Keynsham

Blog Details

Dyson v10 troubleshooting: fix common problems.

• 18 Aug 2023
• Abdur Rehman

The Dyson V10 is a highly efficient cordless vacuum cleaner designed to help you keep your home spotless. However, occasional malfunctions can occur. You should read some troubleshooting tips to address common issues with your machine:

Dyson V10 Not Working

Few troubleshooting steps to help you get v 10 back to working condition:

• Ensure the vacuum is “ Switched On ” and the battery is fully charged.
• Check if the bin is full: A full bin can hinder airflow and affect the vacuum’s performance.
• Clean the filters: Over time, dirt and dust can accumulate and clog the filters, reducing airflow. Regular cleaning helps maintain optimal performance.
• Inspect for blockages: Check both the vacuum cleaner head and hose for any obstructions that may be hindering suction power.

Dyson V10 Not Working After Cleaning Filter:

If your vacuum is still not working properly even after cleaning the filters, it is possible that the filters themselves may be the issue. You can attempt to clean the filters once more. 

After cleaning the filter, the vacuum still has not started working then replace your dyson v10 filter with a new one .

Dyson V10 Blockage Light

This vacuum cleaner is designed to keep your cleaning sessions uninterrupted by promptly alerting you if a blockage occurs. The blockage light may illuminate if the bin is full or a blockage in the hose or wand or a blockage in the cleaner head.

To resolve blockage issues and resume your cleaning routine, follow these steps:

• Empty the bin
• Thoroughly inspect the hose and wand for any potential blockages.
• Clean the cleaner head to ensure it is free from any obstructions.

In the rare event that the blockage light persists even after you have cleared any blockages, it may be necessary to reach out to Dyson’s dedicated customer service team for further assistance.

Dyson V10 Pulsing

If your machine is pulsing, it could be due to a low battery or dirty filters. Here are some steps you can take to resolve the pulsing issue:

• Charge the battery fully.
• Clean the filters.

If your filter is not in good condition, then replace it with genuine and you should buy dyson genuine filters from dyson filters parts page

Pulsing After Cleaning Filter:

If the vacuum is still pulsing after cleaning the filters, consider the following troubleshooting tips:

• Allow the filters to completely dry before reinserting them into the vacuum cleaner.
• Inspect the filters for any signs of damage. Damaged filters may require replacement.
• Reset the vacuum cleaner by removing the wand and attachments, then press and hold the power button for 10 seconds.

 Dyson V10 Warning Lights

The warning lights that can come on if there is a problem with the vacuum cleaner. These lights include:

• Blockage light: This light comes on if the vacuum cleaner is blocked.
• Filter light: This light comes on if the filters are dirty.
• Battery light: This light comes on to indicate the battery level.

In the event that any of these warning lights appear, please consult the user manual for troubleshooting instructions. If you are unable to resolve the issue, we recommend reaching out to Dyson customer service for further assistance.

Dyson V10 Filter Light Always On:

The filter light should automatically turn off when the filters are clean. However, if the light remains on, it indicates that the filters require cleaning or replacement.

To effectively clean the filters, follow these simple steps:

• Remove the filters.
• Rinse the filters thoroughly under warm water.
• Allow the filters to air dry.
• Once dry, reinsert the filters back into the vacuum cleaner.

After following these filter cleaning steps, if the light remains on then replace your dyson v10 filter.

Latest Posts

28 Aug 2024 How to Clean Dyson V7 Vacuum Cleaner: A Step-by-Step Guide

20 Aug 2024 How to Empty Dyson Vacuum Cleaners: A Comprehensive Guide

03 Aug 2024 How to Take Apart a Dyson Vacuum Cleaner: A Step-by-Step Guide

20 Jul 2024 How to Change the Battery on a Dyson V6: A Simple Guide

05 Jul 2024 Step By Step Guide On How To Take Apart Dyson Vacuum Head

07 Apr 2024 Dyson Battery Problems with Solutions

• August 2024  (3)
• July 2024  (2)
• April 2024  (1)
• January 2024  (1)
• December 2023  (2)
• August 2023  (5)
• March 2021  (1)
• January 2021  (3)

latest Reviews

Dyson V10 Animal manual

Question and answer

Hi I had to empty my Dyson v10 when I opened the front well the inside grey and also the red o rings came out and now I’m not sure what to do about it

To empty the Dyson V10 Animal, follow these steps: 1. Make sure that the appliance is disconnected from the charger before emptying the transparent container. Be careful not to pull the 'ON' trigger. 2. Remove the wand by pressing the red wand release button and pulling it away from the container. 3. To release the dirt, hold the appliance with the container in a downward position and firmly push the red container release button. 4. The container will slide down, cleaning the shroud as it goes. The container base will then open. 5. Empty the container as soon as the dirt reaches the level of the MAX mark. Do not overfill. 6. To minimize dust/allergen contact when emptying, tightly wrap the transparent container in a plastic bag and empty it. Remove the transparent container carefully from the bag. Seal the bag tightly and dispose of it as usual. 7. If necessary, you can clean the transparent container by following the instructions in the 'Emptying the transparent container' section. 8. To reattach the transparent container, insert the spine onto the container runner and close the container by pushing the container base upwards until it clicks into place.

what does the flashing yellow curved symbol (like a drain pipe) mean? The battery is fully charged. New filter. I also cannot put the device off “auto” (the button dies not respond).

The flashing yellow curved symbol on the Dyson V10 Animal indicates a battery fault. If the battery is fully charged and a new filter is installed, but the device is not responding to the button to turn off "auto," it is recommended to contact Dyson Helpline for assistance with the battery issue.

The vacuum does not provide continuous suction. Instead, it pulses. I understand this means there is a blockage but do not know how to remove it.

Is red lever abt 5 inches in front of trigger, the lever for cylinder removal? I am afraid of breaking the lever.

I cannot get the dust bin off to empty it. Can you write in simple steps what I need to do. Nothing is moving

I need an answer to this question also. I cannot empty the dust bin either. Is there a trick to doing this?

I can't take off the dust cannister to empty it

I have just cleaned my v10 animal but have forgotten how to reassemble the dust collection part to the main part

How long does it take to charge battery and how long does the battery last?

Hi. Just bought my Dyson v10 animal. Found that the roller and suction stop when using on a flat throw rug. Is this typical. Works on my thicket throw rugs. My shark never had problems.

I have a new Dyson V10 Animal. I cannot get it to connect to my Bluetooth. My Bluetooth is on, but it does not identify the V10. How do I do the setup?

I used my dyson put it away. Went to use it again but didnt work. So I cleaned the filter waited 24 hours to dry. This morning I went to use it and nothing. When I put it to charge it shows the blue mark so there is a connection. I dont know what to do. I still have warranty.

We rinsed out the filter but it is still damp. Is that why the filter light is still flashing?

Dyson V10 Animal specifications

Below you will find the product specifications and the manual specifications of the Dyson V10 Animal.

The Dyson V10 Animal is a vacuum cleaner with a dust capacity of 0.76 liters. Powered by a battery, it provides a runtime of 30 minutes for cleaning. The vacuum cleaner comes with a removable handheld feature, allowing users to easily clean hard-to-reach places. It is designed for dry cleaning and offers cyclonic vacuum air filtering, efficiently capturing dust and dirt. The Dyson V10 Animal can be wall-mounted for convenient storage. Equipped with a crevice tool, it enables users to clean narrow gaps and corners effectively. It has a height of 256 mm, a width of 250 mm, and a depth of 1266 mm, making it compact and easy to maneuver. This vacuum cleaner uses a bagless dust container type, eliminating the need for disposable bags. It utilizes cyclonic technology to separate dirt from the air, maintaining powerful suction performance. The Dyson V10 Animal is a reliable and durable cleaning solution for households. In conclusion, the Dyson V10 Animal is a cordless vacuum cleaner with a 0.76 L dust capacity and 30-minute runtime. It is powered by a battery and features a removable handheld vacuum for added versatility. With cyclonic vacuum air filtering and wall-mountable design, it provides efficient and convenient cleaning. The inclusion of a crevice tool allows for effective cleaning of narrow gaps and corners. Its compact size and bagless dust container make it a reliable and durable cleaning solution for households.

Performance

Packaging content

Weight & dimensions

Packaging data

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Dyson V10 Animal below.

My Dyson vacuum is losing suction. Why is that?

Your Dyson vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged

How often should I check the filter?

A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.

What do I do with a smelly vacuum cleaner?

A commonly used method is to put a little washing powder in the dust container or the dust bag.

How often should I vacuum my house?

For allergy sufferers, vacuuming the house at least twice a week is recommended.

What is the weight of the Dyson V10 Animal?

The Dyson V10 Animal has a weight of 2580 g.

What is the height of the Dyson V10 Animal?

The Dyson V10 Animal has a height of 256 mm.

What is the width of the Dyson V10 Animal?

The Dyson V10 Animal has a width of 250 mm.

What is the depth of the Dyson V10 Animal?

The Dyson V10 Animal has a depth of 1266 mm.

How do I detach the dustbin from the vacuum cleaner?

To detach the dustbin from the Dyson V10 Animal vacuum cleaner, simply press the release button located near the handle and lift the dustbin away from the main body of the machine.

How do I clean the filters of the Dyson V10 Animal?

Cleaning the filters of your Dyson V10 Animal is essential for maintaining optimal performance. To clean the filters, first, detach the bin from the machine. Then, remove the filter assembly by twisting it counterclockwise. Wash both the pre-filter and post-filter with cold water without using any detergent. Allow the filters to dry for at least 24 hours before reattaching them to the machine.

Can I use the Dyson V10 Animal on both carpets and hard floors?

Absolutely! The Dyson V10 Animal is designed to be versatile and works efficiently on both carpets and hard floors. You can seamlessly transition between different floor types without needing to make any manual adjustments.

How do I change the cleaning mode on my Dyson V10 Animal?

The Dyson V10 Animal is equipped with three different power modes: Max, Medium, and Eco. To change the cleaning mode, simply press the power button located on the handle. Each press will cycle through the available modes, allowing you to select the one that suits your cleaning needs.

How long does the battery of the Dyson V10 Animal last?

The Dyson V10 Animal provides impressive battery life depending on the cleaning mode you choose. In the Max mode, the battery will last approximately 20 minutes. On Medium mode, the battery will provide up to 40 minutes of run time, while in Eco mode, it can last up to 60 minutes. Remember that these estimates are based on uninterrupted use and may vary depending on various factors such as suction power and accessories used.

Does the Dyson V10 Animal have a dust capacity of 0.76 L?

Yes, the Dyson V10 Animal has a dust capacity of 0.76 L. This means that it can hold a significant amount of dust and debris before it needs to be emptied, making it convenient for users who have large cleaning tasks.

Does the Dyson V10 Animal have a runtime of 30 minutes?

Yes, the Dyson V10 Animal has a runtime of 30 minutes. This allows users to clean their homes without worrying about the battery running out too quickly. It provides a decent cleaning time for most household cleaning tasks.

Is the Dyson V10 Animal powered by a battery?

Yes, the Dyson V10 Animal is powered by a battery. This makes it a cordless vacuum cleaner, offering the user more freedom to move around while cleaning without being restricted by power cords.

Can the handheld vacuum of the Dyson V10 Animal be removed?

Yes, the handheld vacuum of the Dyson V10 Animal can be removed. This feature allows users to easily clean areas that are hard to reach or use it as a portable vacuum for smaller cleaning tasks.

Does the Dyson V10 Animal have a wall mountable option?

Yes, the Dyson V10 Animal does have a wall mountable option. This allows users to conveniently store the vacuum cleaner by hanging it on the wall, saving space and keeping it within reach for quick and easy access.

Is the manual of the Dyson V10 Animal available in English?

Yes, the manual of the Dyson V10 Animal is available in English .

Is your question not listed? Ask your question here

Related product manuals

Dyson DC59 Animal

Dyson DC24 Animal

Dyson V10 Extra

Dyson V10 Parquet

Dyson V6 Animal

Dyson DC44 Animal

Dyson DC23 Animal

Dyson DC50 Animal

Dyson V7 Animal

Dyson Cordless Vacuum Problems: 7 Common Issues (solutions)

Dyson cordless vacuums have revolutionized the way we clean our homes, offering convenience, mobility, and powerful suction in a compact design.

However, like any other appliance, they can encounter issues from time to time.

The most common Dyson cordless vacuum problems are loss of suction, battery life, vacuum shutting off, and the brush bar not spinning.

Poor Suction or Reduced Power:

One of the most frustrating issues you may face with your Dyson cordless vacuum is poor suction or reduced power.

This can be caused by several factors, but the most common ones are clogged filters, blockages, or a low battery charge.

Vacuum Shuts Off Unexpectedly:

If your Dyson cordless vacuum shuts off unexpectedly during use, it can be frustrating and disrupt your cleaning routine.

Related Articles: 

Battery Life Is Short:

However, if you find that the battery drains quickly, it can be frustrating.

Brush Bar Not Spinning:

The brush bar is an essential component of your Dyson cordless vacuum, helping to agitate and remove dirt from carpets and rugs.

Cordless Vacuums Any Good?

The cordless design allows for easy manoeuvrability and access to hard-to-reach areas.

So, if you’re looking for a reliable and efficient cleaning solution, Dyson cordless vacuums are definitely a top-notch choice!

Dyson Cordless Vaccums Pros and Cons

Pros of dyson cordless vacuums:, portability and convenience:.

Without the need for a cord, you can easily maneuver around your home, reaching tight corners, stairs, and other areas that may be challenging with a corded vacuum.

Versatility:

They typically come with different attachments and tools that allow you to clean various surfaces, such as carpets, hard floors, upholstery, and even ceilings.

You can switch between modes and attachments to adapt to different cleaning tasks with ease.

Powerful Suction:

Innovative feature:.

Dyson cordless vacuums often come with innovative features that enhance the user experience.

These may include HEPA filtration for capturing allergens and particles, hygienic dust bin emptying mechanisms, and intelligent sensors that adjust suction power based on the surface being cleaned.

These features contribute to a cleaner and healthier home environment.

Cons of Dyson Cordless Vacuums:

Limited battery life:.

The battery life of Dyson cordless vacuums can vary, with some models offering around 20-60 minutes of runtime.

Longer Charging Times:

If you forget to charge your vacuum, you may have to wait before you can resume cleaning.

Higher Price Range:

Limited dust capacity:.

Due to their compact design, the dust bins on Dyson cordless vacuums are generally smaller than those of larger corded models.

Final Thoughts

Owning a Dyson cordless vacuum offers a convenient and efficient way to keep your home clean.

By understanding and troubleshooting common issues like poor suction, unexpected shutdowns, short battery life, and a non-spinning brush bar, you can quickly resolve these problems and continue enjoying the benefits of your Dyson vacuum.

Related Articles

How To Fix It

Dyson V10 not working After Cleaning the Filter? 5 easy things to check.

Is your Dyson V10 not working after cleaning the filter? The Dyson V10’s filter is meant to be thoroughly cleaned at least once a month. You will find yourself needing to clean it more frequently if you use it often or capture lots of fine dust. But what happens if you put the filter back after cleaning and your Dyson vacuum no longer works ?

If your Dyson V10 is not working after cleaning the filter, check that the filter unit is attached correctly. It’s also possible that the filter is still wet after cleaning because it hasn’t been given enough time to dry thoroughly, or that the motor head has failed after sucking in water from that wet filter. There could also be a blockage elsewhere, or the filter could be worn out.

In the following sections, we’ll explore each of those possible reasons why your Dyson V10 isn’t working, even after cleaning the filter. We’ll also walk you through the solutions for each of those issues so you can get your Dyson V10 up and running again.

See Also: Why Is My Dyson Vacuum Not Holding A Charge?

Possible Reasons For A Dyson V10 Not Working After Cleaning the Filter:

Table of Contents

If your Dyson V10 is not working after cleaning the filter, take a look at the following list, and see which explanation might fit your particular issue.

Related: Dyson Vacuum Troubleshooting Guide

1. Incorrectly Installed Filter

After cleaning the filter on your Dyson V10, you need to reattach it to the vacuum by twisting the cap clockwise until it clicks. Important: the vacuum will not work if it senses that the filter unit is not installed correctly.

Sometimes, the problem might not be a mistake on your part . Besides incorrectly twisting the unit into place, it’s also possible that debris has gotten stuck and is preventing the filter unit from fitting into place as it should. Without a total seal between the filter unit and the rest of the vacuum, the V10 will not work when you pull the trigger.

Another tell-tale sign that the filter unit isn’t installed correctly is a flashing blue light on the side of the unit when you pull the trigger . That is one of several warning lights designed to notify you when the vacuum is facing an issue that requires troubleshooting.

How to fix it:

To troubleshoot and fix this issue, first remove the filter unit from the vacuum. Inspect the sections where the filter unit comes into contact with the vacuum and ensure that there isn’t any debris that will prevent the filter from locking into place.

Next, push the filter unit into place and twist it clockwise until you hear a click. You might find that you have to apply a bit of force because of the rubber gasket (used to form a very tight seal without any air gaps) between the filter and the vacuum unit.

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians. No in-home service calls. No appointments.

For additional guidance, you can refer to the sticker that’s on the back of the filter unit, which provides you with instructions on attaching it to the V10 correctly.

2. Filter Is Still Wet

Like most people, you’ve probably followed Dyson’s instructions to wash the filter under a cold water tap. Unfortunately, many people do not give the filter enough time to dry out thoroughly afterward . Instead, they mistakenly reattach the filter unit onto the vacuum while it’s still damp.

A wet filter will not allow any air to travel through it , halting all airflow throughout the entire vacuum. When that happens, the Dyson V10 will not allow itself to work as a way of protecting itself against further damage.

If your Dyson V10’s filter is still wet, you must remove it immediately and let it dry overnight . Trying to force the vacuum to work with a wet filter could be very damaging to the appliance and its motor, as you’ll see in the next section.

If the filter is wet, the moisture could find its way into other parts and attachments on the vacuum . That can be very destructive to some of the inner parts. So, if that happens, be sure to take the rest of your vacuum apart and dry out any parts or components that might have become wet.

Dyson recommends that you wash the filter thoroughly and then give it 24 hours to dry out entirely. That can be a very long time if you’re planning on using the vacuum to do more cleaning on the same day. So, be sure to plan ahead.

When drying the filter, you do not have to use a hairdryer, heat gun, or any other heat source to do so . It’s also not a good idea to dry it under direct, scorching sunlight, as that could cause more wear and tear to the filter as well. 

Instead, the most effective way to dry the vacuum filter thoroughly is to put it in a place where there’s some airflow (a portable fan works well). Then, leave the filter to air dry for the next 24 hours , and you’ll be able to use your vacuum like normal again.

3. The Motor head Has Failed

Another possibility why your Dyson V10 not working is that the motor head on your Dyson V10 has failed completely. If this happens after you’ve just cleaned the filter , then it’s likely that the filter was still wet when you reattached it to the vacuum. 

The water from the wet filter would have been sucked in by the motor and damaged it to the point that it can no longer function correctly . That happens when the water finds its way into the electrical parts of the motor, causing a short circuit that damages the motor and makes it completely unusable.

If the motor head on your Dyson V10 has suffered from water damage, then the only solution here is to replace the motor entirely . The best way to do that is to contact Dyson’s customer support to see if they can do that for you. If not, they should be able to tell you what your options are for getting it fixed.

Another option is to go directly to your local appliance repair specialist. They would be able to source the replacement motor and fix it for you as well.

Once the motor head has been replaced with a new one that functions correctly, you’ll be able to continue using your Dyson V10 vacuum like you usually do.

4. The Filter Has Worn Out

The filters on Dyson V10 vacuums are designed to last only two years, with regular use. They will last longer if you rarely use your vacuum, or they’ll wear out quicker if you use it more than the average user . That’s especially true if you use it to capture lots of very fine dust, which saturates the filters much quicker.

When these Dyson vacuum filters catch large pieces of dust and debris, they’re easy to clean. If you wash these filters regularly under a cold tap, most of the dust and debris will be removed without any problems.

However, the same filters also have very tiny pores that capture fine dust. That fine dust is not so easy to remove even after repeated washing.

That means that over time and especially after regular washing, the filter will become worn out as part of its regular wear and tear. The filter will become saturated with dust, reducing the amount of airflow that can easily pass through the filter. 

A vacuum with a clogged filter will not only perform poorly, but also it will put extra stress on the motor and cause premature failure.

If your Dyson V10 has been using the same filter for two years or more, then it’s time to purchase a replacement. It’s always best to buy replacement filters directly from Dyson instead of third-party sellers . That way, you can rest assured that the filter is compatible with your Dyson V10 and that it is highly reliable. 

5. There Are Blockages Elsewhere

Even though you’ve cleaned the Dyson V10’s filter, it’s possible that you may have overlooked a blockage elsewhere in the vacuum . When this happens, the vacuum will pulsate whenever you pull the trigger.

The Dyson V10 is designed sometimes to pulsate when you pull the trigger as a way to notify you that there’s a problem . It does that in order to prevent the motor from running continuously in a way that might damage itself.

If the vacuum is pulsating, then there might be a blockage in the brush bar, the wand, or the inlet . These sections should also be cleaned thoroughly whenever you clean the vacuum’s filter.

To fix this problem:

• Remove all of the Dyson V10’s parts and attachments after you’ve cleaned the filter.
• Inspect the brush bar, the wand, and the inlet (where the wand meets the vacuum) for any blockages. 
• Clean them out and ensure that air can flow through each part without any obstructions.
• Doing so will ensure that air can flow from the bottom of the vacuum (at the brushbar) all the way to the top (at the filter) without any obstructions.

Related: Dyson Vacuum Has No Suction

Related: Dyson Vacuum Has No Power

Related: Dyson Vacuum Smells Bad

Related: Dyson Brush Bar Not Spinning

See Also: Shark Vacuum Troubleshooting

And: Miele Vacuum Troubleshooting

Reader Comments (14)

My dyson 7jammed after opening to empty dirt bin. I can not push the top mechanism back in place.

My cordless dyson vacuum cleaner V10 is not charging at all. The blue light comes on at first then it shuts off completely , therefore not charging at all. Filter is cleaned . I have not used it frequently because it is used in the motor home and when in use it’s about 1/2 hr at a time. I expected the battery would have lasted longer with minimum use. What can I do? I have tried to reset the battery by unplugging the charger and reconnecting to the vacuum ,then holding the start button for 20 seconds with no success.

I can not open up the canister to remove the debris. While I have cleaned the canister it will no longer allow me to clean the canister at all.

I washed the filter in my V11, I let it dry, the motor did work without the filter attached, but now after it dried I installed the filter and it does not work. Could some water gotten into the motor? Is there a reset button or fuse somewhere that could be tripped? How hard is itplace the motorhead, I am quite handy and have fixed an older V7 brush bar replacement.

What does it mean when the filter light on the unit remains on (isn’t flashing)?

You must still be in guarantee. I needed new filter within 2 years. I’d ring Dyson as very helpful in or out of guarantee. Told me to take off collecting bin and gently tap metal drum to remove more dust.

I have the same issue with my Dyson v10. I have watched the videos and have cleaned it accordingly. The filter was rinsed clean and dried for 48 hrs. It indicates with the light that there is a blockage and it pulsates. It is only a year old if that. What should I do?

I would ring Dyson. You still must be in guarantee but even if not they are extremely helpful and tell you to do other things to solve the problem like gently tapping the metal cylinder to remove any dust build up. I needed a new filter within two years.

I can’t find a blockage anywhere and it’s still pulsating. Please advise.

Did you take apart filter? Search video on Youtube “How To Clean Dyson Vacuum?”

Buy a new dyson

Hi there I have this same problem, I even put on a new filter unit. Did you get this resolved? Thanks.

I washed the filter and let it sit for 24 hours. When I went to use it, there were bubbles coming out of the sides of the filter! I did NOT use any soap when I washed it. I washed it again, let it sit for 24 hours and the same thing happened! This is the Dyson 10. It’s a year old.

Advice please!

You should have not let it dry 24 but 48 hrs. Now it is unusable.. Buy another one.

Comments are closed.

Dyson Vacuum Troubleshooting: Fix Common Problems

The first step towards a working Dyson Vacuum is identifying the problem. Select one of our preferred guides below to diagnose and solve Dyson Vacuum common issues.

Dyson Vacuum Has Lost Suction

Your Dyson vacuum has lost suction? They aren't supposed to lose suction according to Dyson. So what do you do? Here's a bunch of helpful solutions to the problem you have.

Dyson Brush Not Spinning

Have your Dyson Vacuum cleaner's brushes have stopped spinning? Not picking up dirt like it used to? Follow these fixes to your Dyson vacuum.

Dyson Keeps Turning Off

Does your Dyson vacuum shut off when you are trying to use it? Follow this fixes to get it running again.

Didn't see your problem? The iFixit Community has answers.

Browse the most common questions asked by our members to see more solutions. Still no luck? You can always ask for help!

Why isn't my Dyson charging?

Dyson v6 Absolute

I can't open my Dyson to empty the rubbish

Red lever will not pull up so I can empty/replace canister

Dyson Vacuum

The power keeps cutting out after a few seconds

it only stays on for 10 seconds... and turns itself off. help?

Dyson V8 Absolute

Why is my Dyson going on an off when I'm holding the on button?

Dyson V6 Motorhead

Not working - 3 blue light on

Flashing red light when trying to use my vacuum

Dyson V6 Animal

Dyson Troubleshooting (Dyson V8, V10 and V11 etc.)

At Vacuumtester.com I receive daily messages about Dyson vacuum cleaners. It often concerns Dyson problems, where people are curious what the solution is. I have written dozens of guides on solving specific Dyson problems on this website.

On this page I list the most common problems and how you can solve them – in most cases – quickly. A complete Dyson troubleshooting guide!

Various Dyson problems

Dyson vacuum cleaners come in many types and designs. When I look at the problems that I often receive in my inbox, it turns out in many cases to be the cordless Dyson vacuum cleaners. Specifically the following models: Dyson V7, Dyson V8, Dyson V10 and Dyson V11.

The problems can be divided into the following categories:

• Notifications: a Dyson can provide notifications on the LCD screen or with lights near the battery.
• Loss of suction power: the Dyson hardly sucks anything anymore
• Electricity problems: the vacuum cleaner no longer charges or the battery suddenly has a very short life
• Bad smells: the vacuum cleaner smells
• Weird noises: suddenly makes a lot of noise
• Visible issues: Damage or Dyson parts not fitting together properly

Top 5 Dyson problems in a row

Over the past year I've been keeping track of which Dyson problems have come up the most. View the top 10 below for an interesting overview.

• The battery of the Dyson vacuum cleaner lasts very short
• The vacuum cleaner battery no longer charges at all
• The Dyson stinks of dog
• Dyson vacuum cleaner suddenly makes a lot of noise
• The Dyson no longer sucks properly

Have you experienced a problem with your Dyson vacuum cleaner yourself? Share your problem at the bottom of this page, so that I can continue to monitor which problems occur most often.

Dyson troubleshooting

Of course I would like to help you to solve these problems as soon as possible. As I mentioned in the introduction, I have already written a manual for all Dyson problems on Vacuumtester.com. You can quickly find the problem solution in the overview below. You can also click through to the complete manual (often with video!) for handy step-by-step plans.

For many problems I have made useful videos, where I help you step by step. Check out my YouTube channel for interesting video tutorials.

Buying Dyson replacement parts

When you have come to the conclusion that you need new Dyson parts, there are a number of factors to consider. It is very important to know which Dyson you have so that you buy parts that actually fit your vacuum cleaner. For example, a filter for the Dyson V8 is different from that of a Dyson V11.

In addition, I recommend that you buy parts from Dyson yourself. I have found that many problems with a Dyson are caused by the use of aftermarket parts. In other words: parts that are not Dyson's own. Check out a complete guide to all the Dyson parts out there here.

I have found that many Dyson problems are caused by the use of aftermarket parts.

Preventing problems with your Dyson vacuum cleaner

It is interesting to think about how you can possibly prevent or postpone problems in the future. For example, I previously did research into the Dyson vacuum battery life , where I already gave tips on how you can use your battery for longer.

Below are some interesting tips that will help you extend the life of your Dyson vacuum cleaner and parts (and thus prevent problems):

• Clean the Dyson filters regularly
• Replace the filters of your Dyson vacuum cleaner at least every 12 months
• Check the vacuum cleaner regularly for blockages
• Keep the parts clean; For example, regularly remove hair from the brushes
• Charge the battery at 20% battery life
• Use the Dyson vacuum as little as possible in turbo mode
• Only buy and use parts from Dyson itself

Fortunately, the various activities above are not a chore. For example, watch the video below to see how easy it is to clean a Dyson HEPA filter.

Check your warranty period at Dyson

When you have bought a Dyson vacuum cleaner, it is strongly recommended to register it on the Dyson website. This allows you to see exactly when you bought it and what your rights are in terms of warranty. You may experience problems within your warranty period, which means you may be entitled to a replacement battery.

I hope my article has solved your Dyson problem. If not, leave a comment at the bottom of this page so I can help you.

Tags: Dyson Stick Vacuum

Robbert Tigchelaar has made testing vacuum cleaners his life's work. He has dedicated himself to conducting fully independent and valuable tests of vacuum cleaners to provide consumers with honest advice. His expertise in vacuum cleaners has been highlighted in The Washington Post and the Daily Express.

Dyson airway blocked: how to solve this message?

How to Solve The Dyson Blinking Blue Light

How to Empty a Roomba Bag?

Reusable Roomba Bags: All You Need to Know

Hiya, I have a Dyson v13 vacuum. It was ok until I tried to clean the air nose.it was still a bit damp when I turned it on. It’s not showing anything when you plug in now and don’t do anything. Do you think I have to take it to a shop to repair? Thank you.

Can you please check which model you have? The Dyson V13 is not an existing model (it could be the Dyson V12 Slim or the Dyson V15 Detect).

When I plug in to the charger the light on the plug flashes once then nothing. No charge!!! HELP PLEASE

Have you checked the cable yet Paul?

the red on/off switch does not seem to be working…please advise

It’s quite possible that it’s broken. This often happens with trigger buttons. I’ve written an article on how you can replace this Dyson trigger yourself.

Thanks for sharing all your experiences. I have the Dyson V11 Animal. It’s a little over 2 years old and I use it daily to keep our carpets clean with 2 cats. I clean the V11 motor head religiously (cat hair accumulates at both ends of the bar) and recently replaced the exhaust filter(OEM) A blockage does not appear to be the issue. All of a sudden the torque head’s beater bar has started to chatter/vibrate loudly. It happens intermittently, not a constant issue. Sound familiar? I’m wondering if my motor is going out?

Hi Barry, in some cases, there could also be a blockage in the vacuum wand or at the motor’s air inlet. I recommend reading this article on a Dyson air way blockage and following all the steps!

Min Dyson V10 starter kun engang imellem, sel om den er fuldt opladet

Leave a reply Cancel reply

Save my name, email, and website in this browser for the next time I comment.

As Vacuumtester, I conduct extensive research into vacuum cleaners. I will look for the best vacuum cleaner that suits your wishes and needs. Worldwide.

• Best Vacuum
• Press Center
• Vacuum Awards™

Vacuumtester is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.